Browsing by Author "Müser, Martin H."
Now showing 1 - 8 of 8
Results Per Page
Sort Options
- ItemAnalytical and numerical results for the elasticity and adhesion of elastic films with arbitrary Poisson’s ratio and confinement(London [u.a.] : Taylor & Francis, 2022) Müller, Christian; Müser, Martin H.We present an approximate, analytical treatment for the linearly elastic response of a film with arbitrary Poisson's ratio (Formula presented.), which is indented by a flat cylindrical punch while resting on a rigid foundation. Our approach is based on a simple scaling argument allowing the vast changes of the elastomer’s effective modulus (Formula presented.) with the ratio of film height (Formula presented.) and indenter radius (Formula presented.) to be described with a compact, analytical expression. This yields exact asymptotics for large and small reduced film heights (Formula presented.), whereby it also reproduces the observation that (Formula presented.) has a pronounced minimum for (Formula presented.) at (Formula presented.). Using Green’s function molecular dynamics (GFMD), we demonstrate that the predictions for (Formula presented.) are reasonably correct and generate accurate reference data for effective modulus and pull-off force. GFMD also reveals that the nature of surface instabilities occurring during stable crack growth as well as the crack initiation itself depend sensitively on the way how continuum mechanics is terminated at small scales, that is, on parameters beyond the two dimensionless numbers (Formula presented.) and (Formula presented.) defining the continuum problem.
- ItemForce microscopy of layering and friction in an ionic liquid(Bristol : IOP Publishing, 2014) Hoth, Judith; Hausen, Florian; Müser, Martin H.; Bennewitz, RolandThe mechanical properties of the ionic liquid 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl) trifluorophosphate ([Py1,4][FAP]) in confinement between a SiOx and a Au(1 1 1) surface are investigated by means of atomic force microscopy (AFM) under electrochemical control. Up to 12 layers of ion pairs can be detected through force measurements while approaching the tip of the AFM to the surface. The particular shape of the force versus distance curve is explained by a model for the interaction between tip, gold surface and ionic liquid, which assumes an exponentially decaying oscillatory force originating from bulk liquid density correlations. Jumps in the tip–sample distance upon approach correspond to jumps of the compliant force sensor between branches of the oscillatory force curve. Frictional force between the laterally moving tip and the surface is detected only after partial penetration of the last double layer between tip and surface.
- ItemIs there more than one stickiness criterion?(Berlin ; Heidelberg : Springer, 2022) Wang, Anle; Müser, Martin H.Adhesion between an elastic body and a smooth, rigid substrate can lead to large tensile stresses between them. However, most macroscopic objects are microscopically rough, which strongly suppresses adhesion. A fierce debate has unfolded recently as to whether local or global parameters determine the crossover between small and large adhesion. Here, we report simulations revealing that the dependence of the pull-off force Fn on the surface energy γ does not only have two regimes of high and low adhesion but up to four regimes. They are related to contacts, which at the moment of rupture consist of (i) the last individual Hertzian-shaped contact, in which is linear in γ, (ii) a last meso-scale, individual patches with super-linear scaling, (iii) many isolated contact patches with extremely strong scaling, and (iv) a dominating largest contact patch, for which the pull-off stress is no longer negligible compared to the maximum, microscopic pull-off stress. Regime (iii) can be seen as a transition domain. It is located near the point where the surface energy is half the elastic energy per unit area in conformal contact. A criterion for the transition between regimes (i) and (ii) appears difficult to grasp. [Figure not available: see fulltext.].
- ItemMechanochemical Ionization: Differentiating Pressure-, Shear-, and Temperature-Induced Reactions in a Model Phosphate(Cham : Springer International Publishing, 2022) Sukhomlinov, Sergey V.; Kickelbick, Guido; Müser, Martin H.Using density-functional theory-based molecular dynamics simulations, we study stress and temperature-induced chemical reactions in bulk systems containing triphosphoric acid and zinc phosphate molecules. The nature of the products depends sensitively on the imposed conditions, e.g., isotropic and even more so shear stress create (zwitter-) ionic products. Free ions also emerge from thermal cycles, but the reactions are endothermic rather than exothermic as for stress-induced transitions and zinc atoms remain four-coordinated. Hydrostatic stresses required for reactions to occur lie well below those typical for tribological micro-contacts of stiff solids and are further reduced by shear. Before zinc atoms change their coordination under stress, proton mobility increases, i.e., hydrogen atoms start to change the oxygen atom they are bonded to within 10 ps time scales. The hydrostatic stress for this to occur is reduced with increasing shear. Our finding suggests that materials for which number, nature, and mobility of ions are stress sensitive cannot have a well-defined position in the triboelectric series, since local contact stresses generally depend on the stiffness of the counter body. Moreover, our simulations do not support the idea that chemical reactions in a tribo-contact are commonly those that would be obtained through heating alone.
- ItemOn the adhesion between thin sheets and randomly rough surfaces(Lausanne : Frontiers Media, 2022) Wang , Anle; Müser, Martin H.Thin, elastic sheets are well known to adapt to rough counterfaces, whereby adhesive interactions and pull-off stresses σp can be significant, yet no generally applicable, quantitative guideline has been suggested hitherto as to when a sheet should be considered thin enough to be sticky. Using computer simulations, we find that the dependence of σp on surface energy γ has a high and a low-pull-off-stress regime. For randomly rough surfaces, we locate the dividing line at the point, where γ is approximately half the elastic energy per unit area needed to make conformal contact, which is the same ratio as for semi-infinite elastic solids. This rule of thumb also applies to a certain degree for single-wavelength roughness, in which case the transition from low to high stickiness occurs when at the moment of maximum tension contact is not only broken at the height maxima but also at the saddle points.
- ItemOn the viscous dissipation caused by randomly rough indenters in smooth sliding motion(Amsterdam : Elsevier, 2021) Sukhomlinov, Sergey; Müser, Martin H.The viscous dissipation between rigid, randomly rough indenters and linearly elastic counter bodies sliding past them is investigated using Green’s function molecular dynamics. The study encompasses a variety of models differing in the height spectra properties of the rigid indenter, in the viscoelasticity of the elastomer, and in their interaction. All systems reveal the expected damping linear in sliding velocity at small and a pronounced maximum at intermediate . Persson’s theory of rubber friction, which is adopted to the studied model systems, reflects all observed trends. However, close quantitative agreement is only found up to intermediate sliding velocities. Relative errors in the friction force become significant once the contact area is substantially reduced by sliding.
- ItemSignificance of Elastic Coupling for Stresses and Leakage in Frictional Contacts([Ithaca, NY] : Arxiv.org, 2023) Müller, Christian; Müser, Martin H.; Carbone, Giuseppe; Menga, NicolaWe study how the commonly neglected coupling of normal and in-plane elastic response affects tribological properties when Hertzian or randomly rough indenters slide past an elastic body. Compressibility-induced coupling is found to substantially increase maximum tensile stresses, which cause materials to fail, and to decrease friction such that Amontons law is violated macroscopically even when it holds microscopically. Confinement-induced coupling increases friction and enlarges domains of high tension. Moreover, both types of coupling affect the gap topography and thereby leakage. Thus, coupling can be much more than a minor perturbation of a mechanical contact.
- ItemTactile perception of randomly rough surfaces(Berlin : Springer Nature, 2020) Sahli, Riad; Prot, Aubin; Wang, Anle; Müser, Martin H.; Piovarči, Michal; Didyk, Piotr; Bennewitz, RolandMost everyday surfaces are randomly rough and self-similar on sufficiently small scales. We investigated the tactile perception of randomly rough surfaces using 3D-printed samples, where the topographic structure and the statistical properties of scale-dependent roughness were varied independently. We found that the tactile perception of similarity between surfaces was dominated by the statistical micro-scale roughness rather than by their topographic resemblance. Participants were able to notice differences in the Hurst roughness exponent of 0.2, or a difference in surface curvature of 0.8 mm−1 for surfaces with curvatures between 1 and 3 mm−1. In contrast, visual perception of similarity between color-coded images of the surface height was dominated by their topographic resemblance. We conclude that vibration cues from roughness at the length scale of the finger ridge distance distract the participants from including the topography into the judgement of similarity. The interaction between surface asperities and fingertip skin led to higher friction for higher micro-scale roughness. Individual friction data allowed us to construct a psychometric curve which relates similarity decisions to differences in friction. Participants noticed differences in the friction coefficient as small as 0.035 for samples with friction coefficients between 0.34 and 0.45.