Browsing by Author "Rizzi, Paola"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    A comparative study of the influence of the deposition technique (electrodeposition versus sputtering) on the properties of nanostructured Fe70Pd30 films
    (Abington : Taylor & Francis, 2020) Cialone, Matteo; Fernandez-Barcia, Monica; Celegato, Federica; Coisson, Marco; Barrera, Gabriele; Uhlemann, Margitta; Gebert, Annett; Sort, Jordi; Pellicer, Eva; Rizzi, Paola; Tiberto, Paola
    Sputtering and electrodeposition are among the most widespread techniques for metallic thin film deposition. Since these techniques operate under different principles, the resulting films typically show different microstructures even when the chemical composition is kept fixed. In this work, films of Fe70Pd30 were produced in a thickness range between 30 and 600 nm, using both electrodeposition and sputtering. The electrodeposited films were deposited under potentiostatic regime from an ammonia sulfosalicylic acid-based aqueous solution. Meanwhile, the sputtered films were deposited from a composite target in radio frequency regime. Both approaches were proven to yield high quality and homogenous films. However, their crystallographic structure was different. Although all films were polycrystalline and Fe and Pd formed a solid solution with a body-centered cubic structure, a palladium hydride phase was additionally detected in the electrodeposited films. The occurrence of this phase induced internal stress in the films, thereby influencing their magnetic properties. In particular, the thickest electrodeposited Fe70Pd30 films showed out-of-plane magnetic anisotropy, whereas the magnetization easy axis lied in the film plane for all the sputtered films. The domain pattern of the electrodeposited films was investigated by magnetic force microscopy. Finally, nanoindentation studies highlighted the high quality of both the sputtered and electrodeposited films, the former exhibiting higher reduced Young’s modulus and Berkovich hardness values.
  • Thumbnail Image
    Item
    Surface modification of Ti40Cu40Zr11Fe3Sn3Ag3 amorphous alloy for enhanced biocompatibility in implant applications
    (Rio de Janeiro : Elsevier, 2024) Tiwari, Kirti; Blanquer, Andreu; Pavan, Cristina; Tomatis, Maura; Navas, Nora Fernandez; Scaglione, Federico; Fiore, Gianluca; Turci, Francesco; Nogués, Carme; Rizzi, Paola
    This study focuses on the design of a new Ti based multicomponent amorphous alloy for the development of biocompatible implant materials with enhanced hemocompatibility and cytocompatibility. While this class of amorphous alloys has shown its potential for biomedical implant applications, there are major concerns due to the presence of elements such as copper which can lead to cytotoxicity in the human body during long term implantation. Nevertheless, copper is indispensable in the development of an amorphous alloy. Thus, the objective of this work is to selectively remove copper from the surface of the Ti40Cu40Zr11Fe3Sn3Ag3 (at%) amorphous alloy using the dealloying technique and produce a patterned protective passivated surface rich in Ti and Zr oxides. Nitric acid (HNO3) has been found to be effective in depleting copper from the sample surface. Optimization of treatment parameters such as temperature (70 °C and room temperature) yielded drastic differences in the morphology of the samples studied using Field-Emission Scanning Electron Microscopy. The treated sample surface demonstrated good hemocompatibility and cytocompatibility with primary human osteoblast cells (HOb) and human osteosarcoma cell line (Saos-2). Additionally, the treated samples showed higher ability to produce reactive oxygen species with respect to pristine samples, which could be convenient for preserving the implant from bacterial contamination. These findings contribute to the advancement of producing copper-depleted nanostructured Ti based amorphous alloys for biomedical implant applications.