PulPro-SMC - Pultrusion-Profile in Kombination mit lastpfadgerechten SMC aus recycelten Kohlenstofffasern
Abschlussbericht Konsortium zum Projekt
Date
Authors
Editor
Advisor
Volume
Issue
Journal
Series Titel
Book Title
Publisher
Supplementary Material
Other Versions
Link to publishers' Version
Abstract
Das Forschungsprojekt PulPro-SMC entwickelte eine innovative Leichtbautechnologie für Schienenfahrzeuge durch die Kombination von Pultrusionsprofilen mit Sheet Molding Compound (SMC) zu stoffschlüssig verbundenen Knotenstrukturen. Ziel war die Substitution konventioneller Stahlbauweisen durch faserverstärkte Kunststoffe, um signifikante Gewichtseinsparungen bei gleichzeitiger Erfüllung der strengen Brandschutzanforderungen nach EN 45545 zu erreichen.
Ein zentrales Ergebnis ist die Entwicklung gradiert ausgehärteter Pultrusionsprofile, die durch kontrollierte Aushärtegrade (T1-T4) eine optimale stoffschlüssige Anbindung an das umgebende SMC ermöglichen. Die Integration von Aluminiumhydroxid (ATH) als Flammschutzadditiv in das Harzsystem erlaubte die erfolgreiche Zertifizierung nach Hazard Level 2, Requirement Set 1 (HL2 R1). Am Beispiel eines Wagenkastensegments wurde die Technologie validiert und eine Massereduktion von 7 % gegenüber der Stahlreferenz nachgewiesen. Die entwickelten Prozesse für Towpreg-Herstellung, gradierte Pultrusion und SMC-Pressverfahren wurden erfolgreich in einen durchgängigen Fertigungsprozess überführt. Die Projektergebnisse bilden die Grundlage für den zukünftigen Einsatz von FVK-Hybridstrukturen in tragenden Schienenfahrzeugkomponenten und leisten damit einen Beitrag zur Energie- und Ressourceneffizienz im Bahnverkehr.
State of the art: In rail vehicle construction, conventional steel construction methods still dominate car body structures, which offer established manufacturing processes but have considerable disadvantages in terms of weight and thus energy consumption. Fiber composite plastics (FRP) have so far been used mainly for non-structural components such as interior trims or front masks, while their use in load-bearing structures is limited due to a lack of standardized manufacturing processes and node connection technologies. Although pultrusion production enables the efficient production of continuous profiles with a high fiber volume content, suitable concepts for bonding such profiles in complex node geometries have been lacking so far. The SMC process (Sheet Molding Compound) offers potential for complex geometries, but conventional short fibers do not achieve the required mechanical properties for structural applications in rail vehicle construction.
Objective: The aim of the PulPro-SMC research project was to develop an innovative process combination of pultrusion and SMC pressing processes for the production of load-bearing lightweight structures for rail vehicles. Heavy-duty CFRP pultrusion profiles were to be combined with fiber-reinforced SMC node elements to form a weight-optimized sidewall structure. A central project goal was the development of a novel node concept that enables the force-flow-oriented connection of the profiles and at the same time meets the requirements for fire protection (HL2 R1) and mechanical load-bearing capacity. The results were to be validated using a scaled demonstrator and a mass reduction of at least 20 % compared to conventional steel construction methods was to be demonstrated.
Results: In the PulPro-SMC project, a process combination of CFRP pultrusion and SMC pressing process was successfully developed, which can be used to produce load-bearing node connections for rail vehicle sidewall structures. The manufactured demonstrator with eleven X-nodes meets the fire protection requirements according to HL2 R1 and achieves a mass saving of approx. 7 % compared to conventional steel construction. The TowPreg reinforcement of the SMC node elements enables load transmission in line with force flow and opens up new application potential for FRP structures in rail vehicle construction.
