CC BY 4.0 UnportedRiaz, AbdullahWitte, KerstinBodnar, WiktorSeitz, HermannSchell, NorbertSpringer, ArminBurkel, Eberhard2023-01-242023-01-242021https://oa.tib.eu/renate/handle/123456789/11016http://dx.doi.org/10.34657/10042CaTiO3 is a promising candidate as a pseudo-piezoelectric scaffold material for bone implantation. In this study, pure and magnesium/iron doped CaTiO3 are synthesized by sol-gel method and spark plasma sintering. Energy dispersive X-ray mapping confirm the homogenous distribution of doping elements in sintered samples. High-energy X-ray diffraction investigations reveal that doping of nanostructured CaTiO3 increased the strain and defects in the structure of CaTiO3 compared to the pure one. This led to a stronger pseudo-piezoelectric effect in the doped samples. The charge produced in magnesium doped CaTiO3 due to the direct piezoelectric effect is (2.9 ± 0.1) pC which was larger than the one produced in pure CaTiO3 (2.1 ± 0.3) pC, whereas the maximum charge was generated by iron doped CaTiO3 with (3.6 ± 0.2) pC. Therefore, the pseudo-piezoelectric behavior can be tuned by doping. This tuning of pseudo-piezoelectric response provides the possibility to systematically study the bone response using different piezoelectric strengths and possibly adjust for bone tissue engineering.enghttps://creativecommons.org/licenses/by/4.0600Bone tissue engineeringCaTiO3DopingNanostructurePiezoelectric effectX‐ray diffractionArticle