Search Results

Now showing 1 - 3 of 3
  • Item
    How activated carbon improves the performance of non-thermal plasma removing methyl ethyl ketone from a gas stream
    ([Amsterdam] : Elsevier B.V., 2021) Schmidt, Michael; Kettlitz, Manfred; Kolb, Juergen F.
    The combination of non-thermal plasma (NTP), operated at room temperature and at atmospheric pressure in air and in combination with activated carbon filters offers a more efficient removal of VOCs from gas streams than each individual method alone. Efficiencies, synergies and mechanisms of this combination were investigated by means of comprehensive quantitative Fourier transform infrared spectroscopy analysis. Therefore, dry and wet synthetic air containing about 90 ppm of methyl ethyl ketone (MEK) were treated with non-thermal plasma (NTP) and an intentionally undersized activated carbon (AC) filter, separately and in combination. As a result, removal of about 50 % was achieved for NTP or AC alone but a removal close to 95 % was found for the combination. Ozone, generated by the NTP, was reduced by 55 % with the AC-filter. For the operation of the NTP with humid air, a decomposition of the pollutant on AC was observed even after the plasma was switched off.
  • Item
    Inactivation of airborne bacteria by plasma treatment and ionic wind for indoor air cleaning
    (Hoboken, NJ : Wiley Interscience, 2020) Prehn, Franziska; Timmermann, Eric; Kettlitz, Manfred; Schaufler, Katharina; Günther, Sebastian; Hahn, Veronika
    Airborne bacteria are a general problem in medical or health care facilities with a high risk for nosocomial infections. Rooms with a continuous airflow, such as operation theaters, are of particular importance due to a possible dissemination and circulation of pathogens including multidrug-resistant microorganisms. In this regard, a cold atmospheric-pressure plasma (CAP) may be a possibility to support usual disinfection procedures due to its decontaminating properties. The aim of this study was to determine the antimicrobial efficacy of a plasma decontamination module that included a dielectric barrier discharge for plasma generation. Experimental parameters such as an airflow velocity of 4.5 m/s and microbial contaminations of approximately 6,000 colony-forming units (cfu)/m3 were used to simulate practical conditions of a ventilation system in an operating theater. The apathogenic microorganism Escherichia coli K12 DSM 11250/NCTC 10538 and the multidrug-resistant strains E. coli 21181 and 21182 (isolated from patients) were tested to determine the antimicrobial efficacy. In summary, the number of cfu was reduced by 31–89% for the tested E. coli strains, whereby E. coli K12 was the most susceptible strain toward inactivation by the designed plasma module. A possible correlation between the number or kind of resistances and susceptibility against plasma was discussed. The inactivation of microorganisms was affected by plasma intensity and size of the plasma treatment area. In addition, the differences of the antimicrobial efficacies caused through the nebulization of microorganisms in front (upstream) or behind (downstream) the plasma source were compared. The presence of ionic wind had no influence on the reduction of the number of cfu for E. coli K12, as the airflow velocity was too high for a successful precipitation, which would be a prerequisite for an increased antimicrobial efficacy. The inactivation of the tested microorganisms confirms the potential of CAP for the improvement of air quality. The scale-up of this model system may provide a novel tool for an effective air cleaning process.