7 results
Search Results
Now showing 1 - 7 of 7
- ItemOverview of the atmospheric research program during the International Arctic Ocean Expedition of 1991 (IAOE-91) and its scientific results(Milton Park : Taylor & Francis, 2017) Leck, C.; Bigg, E.K.; Covert, D.S.; Heintzenberg, J.; Maenhaut, W.; Nilsson, E.D.; Wiedensohler, A.The broad aim of the Atmospheric program of the International Arctic Ocean Expedition (IAOE-91) was to test the hypothesis that marine biogenically produced dimethyl sulfide (DMS) gas can exert a significant global climatic control. The hypothesis states that DMS is transferred to the atmosphere and is oxidised to form airborne particles. Some of these grow large enough to act as cloud condensation nuclei (CCN) which help determine cloud droplet concentration. The latter has a strong influence on cloud albedo and hence on the radiation balance of the area affected. In summer, the central Arctic is a specially favourable region for studying the natural sulfur cycle in that the open waters surrounding the pack ice are the only significant sources of DMS and there are almost no anthropogenic particle sources. Concentrations of seawater and atmospheric DMS decreased at about the same rate during the period of measurements, (1 August to 6 October, latitudes 75°N to 90°N) spanning about three orders of magnitude. Methane sulfonate and nonsea salt sulfate in the submicrometer particles, which may be derived from atmospheric DMS, also decreased similarly, suggesting that the first part of the hypothesis under test was true. Influences on cloud droplet concentration and radiation balance could not be measured. Size-resolved aerosol chemistry showed a much lower proportion of methane sulfonate to be associated with supermicrometer particles than has been found elsewhere. Its molar ratio to nonsea salt sulfate suggested that the processes controlling the particulate chemistry do not exhibit a net temperature dependence. Elemental analysis of the aerosol also revealed the interesting possibility that debris from Siberian rivers transported on the moving ice represent a fairly widespread source of supermicrometer crustal material within the pack ice. Highly resolved measurements of aerosol number size distributions were made in the diameter range 3 nm to 500 nm. 3 distinct modal sizes were usually present, the “ultrafine”, “Aitken” and “accumulation” modes centred on 14, 45 and 170 nm diameter, respectively. The presence of ultrafine particles, implying recent production, was more frequent than has been found in lower latitude remote marine areas. Evidence suggests that they were mixed to the surface from higher levels. Sudden and often drastic changes in aerosol concentration and size distribution were surprisingly frequent in view of the relatively slowly changing meteorology of the central Arctic during the study period and the absence of strong pollution sources. They were most common in particles likely to have taken part in cloud formation (> 80 nm diameter). 2 factors appear to have been involved in these sudden changes. The 1st was the formation of vertical gradients in aerosol concentration due to interactions between particles and clouds or favoured regions for new particle production during periods of stability. The 2nd was sporadic localised breakdowns of the stability, bringing changed particle concentrations to the measurement level. Probable reasons for these sporadic mixing events were indicated by the structure of the Marine Boundary Layer (MBL) investigated with high resolution rawinsondes. Low level jets were present about 60% of the time, producing conditions conductive to turbulence and shear-induced waves. It is concluded that an even more detailed study of meteorological processes in the MBL in conjunction with more highly time-resolved measurements of gas-aerosol physics and chemistry appears to be essential in any future research aimed at studying the indirect, cloud mediated, effect of aerosol particles.
- ItemAerosol number size distributions from 3 to 500 nm diameter in the arctic marine boundary layer during summer and autumn(Copenhagen : Blackwell Munksgaard, 1996) Covert, D.S.; Wiedensohler, A.; Aalto, P.; Heintzenberg, J.; Mcmurry, P.H.; Leck, C.Aerosol physics measurements made onboard the Swedish icebreaker Oden in the late Summer and early Autumn of 1991 during the International Arctic Ocean Expedition (IAOE-91) have provided the first data on the size distribution of particles in the Arctic marine boundary layer (MBL) that cover both the number and mass modes of the size range from 3 to 500 nm diameter. These measurements were made in conjunction with atmospheric gas and condensed phase chemistry measurements in an effort to understand a part of the ocean-atmosphere sulfur cycle. Analysis of the particle physics data showed that there were three distinct number modes in the submicrometric aerosol in the Arctic MBL. These modes had geometric mean diameters of around 170 nm. 45 nm and 14 nm referred to as accumulation, Aitken and ultrafine modes, respectively. There were clear minima in number concentrations between the modes that appeared at 20 to 30 nm and at 80 to 100 nm. The total number concentration was most frequently between 30 and 60 particles cm-3 with a mean value of around 100 particles cm-3, but the hourly average concentration varied over two to three orders of magnitude during the 70 days of the expedition. On average, the highest concentration was in the accumulation mode that contained about 45% of the total number, while the Aitken mode contained about 40%. The greatest variability was in the ultrafine mode concentration which is indicative of active, earby sources (nucleation from the gas phase) and sinks; the Aitken and accumulation mode concentrations were much less variable. The ultrafine mode was observed about two thirds of the time and was dominant 10% of the time. A detailed description and statistical analysis of the modal aerosol parameters is presented here.
- ItemNear-surface profiles of aerosol number concentration and temperature over the Arctic Ocean(München : European Geopyhsical Union, 2011) Held, A.; Orsini, D.A.; Vaattovaara, P.; Tjernström, M.; Leck, C.Temperature and particle number concentration profiles were measured at small height intervals above open and frozen leads and snow surfaces in the central Arctic. The device used was a gradient pole designed to investigate potential particle sources over the central Arctic Ocean. The collected data were fitted according to basic logarithmic flux-profile relationships to calculate the sensible heat flux and particle deposition velocity. Independent measurements by the eddy covariance technique were conducted at the same location. General agreement was observed between the two methods when logarithmic profiles could be fitted to the gradient pole data. In general, snow surfaces behaved as weak particle sinks with a maximum deposition velocity vd = 1.3 mm s−1 measured with the gradient pole. The lead surface behaved as a weak particle source before freeze-up with an upward flux Fc = 5.7 × 104 particles m−2 s−1, and as a relatively strong heat source after freeze-up, with an upward maximum sensible heat flux H = 13.1 W m−2. Over the frozen lead, however, we were unable to resolve any significant aerosol profiles.
- ItemPotential source regions and processes of aerosol in the summer Arctic(München : European Geopyhsical Union, 2015) Heintzenberg, J.; Leck, C.; Tunved, P.Sub-micrometer particle size distributions measured during four summer cruises of the Swedish icebreaker Oden 1991, 1996, 2001, and 2008 were combined with dimethyl sulfide gas data, back trajectories, and daily maps of pack ice cover in order to investigate source areas and aerosol formation processes of the boundary layer aerosol in the central Arctic. With a clustering algorithm, potential aerosol source areas were explored. Clustering of particle size distributions together with back trajectories delineated five potential source regions and three different aerosol types that covered most of the Arctic Basin: marine, newly formed and aged particles over the pack ice. Most of the pack ice area with < 15% of open water under the trajectories exhibited the aged aerosol type with only one major mode around 40 nm. For newly formed particles to occur, two conditions had to be fulfilled over the pack ice: the air had spent 10 days while traveling over ever more contiguous ice and had traveled over less than 30% open water during the last 5 days. Additionally, the air had experienced more open water (at least twice as much as in the cases of aged aerosol) during the last 4 days before arrival in heavy ice conditions at Oden. Thus we hypothesize that these two conditions were essential factors for the formation of ultrafine particles over the central Arctic pack ice. In a comparison the Oden data with summer size distribution data from Alert, Nunavut, and Mt. Zeppelin, Spitsbergen, we confirmed the Oden findings with respect to particle sources over the central Arctic. Future more frequent broken-ice or open water patches in summer will spur biological activity in surface water promoting the formation of biological particles. Thereby low clouds and fogs and subsequently the surface energy balance and ice melt may be affected.
- ItemThe summer aerosol in the central Arctic 1991-2008: Did it change or not?(München : European Geopyhsical Union, 2012) Heintzenberg, J.; Leck, C.In the course of global warming dramatic changes are taking place in the Arctic and boreal environments. However, physical aerosol data in from the central summer Arctic taken over the course of 18 yr from 1991 to 2008 do not show systematic year-to-year changes, albeit substantial interannual variations. Besides the limited extent of the data several causes may be responsible for these findings. The processes controlling concentrations and particle size distribution of the aerosol over the central Arctic perennial pack ice area, north of 80°, may not have changed substantially during this time. Environmental changes are still mainly effective in the marginal ice zone, the ice-free waters and continental rims and have not propagated significantly into the central Arctic yet where they could affect the local aerosol and its sources. The analysis of meteorological conditions of the four expedition summers reveal substantial variations which we see as main causes of the measured variations in aerosol parameters. With combined lognormal fits of the hourly number size distributions of the four expeditions representative mode parameters for the summer aerosol in the central Arctic have been calculated. The combined aerosol statistics discussed in the present paper provide comprehensive physical data on the summer aerosol in the central Arctic. These data are the only surface aerosol information from this region.
- ItemThe Arctic Summer Cloud Ocean Study (ASCOS): Overview and experimental design(München : European Geopyhsical Union, 2014) Tjernström, M.; Leck, C.; Birch, C.E.; Bottenheim, J.W.; Brooks, B.J.; Brooks, I.M.; Bäcklin, L.; Chang, R.Y.-W.; de Leeuw, G.; Di Liberto, L.; de la Rosa, S.; Granath, E.; Graus, M.; Hansel, A.; Heintzenberg, J.; Held, A.; Hind, A.; Johnston, P.; Knulst, J.; Martin, M.; Matrai, P.A.; Mauritsen, T.; Müller, M.; Norris, S.J.; Orellana, M.V.; Orsini, D.A.; Paatero, J.; Persson, P.O.G.; Gao, Q.; Rauschenberg, C.; Ristovski, Z.; Sedlar, J.; Shupe, M.D.; Sierau, B.; Sirevaag, A.; Sjogren, S.; Stetzer, O.; Swietlicki, E.; Szczodrak, M.; Vaattovaara, P.; Wahlberg, N.; Westberg, M.; Wheeler, C.R.The climate in the Arctic is changing faster than anywhere else on earth. Poorly understood feedback processes relating to Arctic clouds and aerosol–cloud interactions contribute to a poor understanding of the present changes in the Arctic climate system, and also to a large spread in projections of future climate in the Arctic. The problem is exacerbated by the paucity of research-quality observations in the central Arctic. Improved formulations in climate models require such observations, which can only come from measurements in situ in this difficult-to-reach region with logistically demanding environmental conditions. The Arctic Summer Cloud Ocean Study (ASCOS) was the most extensive central Arctic Ocean expedition with an atmospheric focus during the International Polar Year (IPY) 2007–2008. ASCOS focused on the study of the formation and life cycle of low-level Arctic clouds. ASCOS departed from Longyearbyen on Svalbard on 2 August and returned on 9 September 2008. In transit into and out of the pack ice, four short research stations were undertaken in the Fram Strait: two in open water and two in the marginal ice zone. After traversing the pack ice northward, an ice camp was set up on 12 August at 87°21' N, 01°29' W and remained in operation through 1 September, drifting with the ice. During this time, extensive measurements were taken of atmospheric gas and particle chemistry and physics, mesoscale and boundary-layer meteorology, marine biology and chemistry, and upper ocean physics. ASCOS provides a unique interdisciplinary data set for development and testing of new hypotheses on cloud processes, their interactions with the sea ice and ocean and associated physical, chemical, and biological processes and interactions. For example, the first-ever quantitative observation of bubbles in Arctic leads, combined with the unique discovery of marine organic material, polymer gels with an origin in the ocean, inside cloud droplets suggests the possibility of primary marine organically derived cloud condensation nuclei in Arctic stratocumulus clouds. Direct observations of surface fluxes of aerosols could, however, not explain observed variability in aerosol concentrations, and the balance between local and remote aerosols sources remains open. Lack of cloud condensation nuclei (CCN) was at times a controlling factor in low-level cloud formation, and hence for the impact of clouds on the surface energy budget. ASCOS provided detailed measurements of the surface energy balance from late summer melt into the initial autumn freeze-up, and documented the effects of clouds and storms on the surface energy balance during this transition. In addition to such process-level studies, the unique, independent ASCOS data set can and is being used for validation of satellite retrievals, operational models, and reanalysis data sets.
- ItemThe Global Aerosol Synthesis and Science Project (GASSP): Measurements and Modeling to Reduce Uncertainty(Boston, Mass. : ASM, 2017) Reddington, C.L.; Carslaw, K.S.; Stier, P.; Schutgens, N.; Coe, H.; Liu, D.; Allan, J.; Browse, J.; Pringle, K.J.; Lee, L.A.; Yoshioka, M.; Johnson, J.S.; Regayre, L.A.; Spracklen, D.V.; Mann, G.W.; Clarke, A.; Hermann, M.; Henning, S.; Wex, H.; Kristensen, T.B.; Leaitch, W.R.; Pöschl, U.; Rose, D.; Andreae, M.O.; Schmale, J.; Kondo, Y.; Oshima, N.; Schwarz, J.P.; Nenes, A.; Anderson, B.; Roberts, G.C.; Snider, J.R.; Leck, C.; Quinn, P.K.; Chi, X.; Ding, A.; Jimenez, J.L.; Zhang, Q.The largest uncertainty in the historical radiative forcing of climate is caused by changes in aerosol particles due to anthropogenic activity. Sophisticated aerosol microphysics processes have been included in many climate models in an effort to reduce the uncertainty. However, the models are very challenging to evaluate and constrain because they require extensive in situ measurements of the particle size distribution, number concentration, and chemical composition that are not available from global satellite observations. The Global Aerosol Synthesis and Science Project (GASSP) aims to improve the robustness of global aerosol models by combining new methodologies for quantifying model uncertainty, to create an extensive global dataset of aerosol in situ microphysical and chemical measurements, and to develop new ways to assess the uncertainty associated with comparing sparse point measurements with low-resolution models. GASSP has assembled over 45,000 hours of measurements from ships and aircraft as well as data from over 350 ground stations. The measurements have been harmonized into a standardized format that is easily used by modelers and nonspecialist users. Available measurements are extensive, but they are biased to polluted regions of the Northern Hemisphere, leaving large pristine regions and many continental areas poorly sampled. The aerosol radiative forcing uncertainty can be reduced using a rigorous model–data synthesis approach. Nevertheless, our research highlights significant remaining challenges because of the difficulty of constraining many interwoven model uncertainties simultaneously. Although the physical realism of global aerosol models still needs to be improved, the uncertainty in aerosol radiative forcing will be reduced most effectively by systematically and rigorously constraining the models using extensive syntheses of measurements.