2 results
Search Results
Now showing 1 - 2 of 2
- ItemVoltage-controlled on switching and manipulation of magnetization via the redox transformation of β-FeOOH nanoplatelets(Bristol : IOP Publ., 2020) Nichterwitz, Martin; Neitsch, Sabine; Röher, Stefan; Wolf, Daniel; Nielsch, Kornelius; Leistner, KarinRedox-based metal/metal oxide transformations achieved via electrolytic gating recently emerged as a novel, magneto-ionic route for voltage control of magnetism. So far, mainly metal or oxide thin films and nanoporous metal alloy structures are used as starting materials. The present study demonstrates a magneto-ionic transformation starting from a stable electrodeposited FeOOH nanoplatelet structure. The application of a low voltage in a Li-based electrolyte results in the reduction of the virtually non-magnetic FeOOH into ferromagnetic Fe, yielding an ON switching of magnetization. The magnetization can be tuned in a large range by the time of voltage application and remains stable after voltage-switch off. A reversible magneto-ionic change of magnetization of up to 15% is achieved in the resulting iron films with a thickness of about 30 nm. This large magneto-ionic effect is attributed to the enhanced roughness of the iron films obtained from the nanoplatelet structure. The robust, voltage-controlled, and non-volatile ON switching of magnetism starting from a stable oxide structure is promising for the development of energy-efficient magnetic switches, magnetic actuation and may offer new avenues in magnetoelectronic devices. © 2019 IOP Publishing Ltd.
- ItemInfluence of the magnet aspect ratio on the dynamic stiffness of a rotating superconducting magnetic bearing(Bristol : IOP Publ., 2020) Espenhahn, Tilo; Wunderwald, Florian; Möller, Marcel; Sparing, Maria; Hossain, Mahmud; Fuchs, Günter; Abdkader, Anwar; Cherif, Chokri; Nielsch, Kornelius; Hühne, RubenRotating superconducting bearings promise great potential in applications due to their frictionless operation. However, these bearings show a lower dynamic stiffness and damping coefficient compared to ball bearings. In this paper we studied a bearing consisting of a fixed YBCO ring and a rotating magnet above the superconductor. The influence of the magnet aspect ratio on the dynamic stiffness of the bearing was investigated in order to find an optimized size. To change the aspect ratio, we kept the inner diameter of the ring constant and reduced the outer diameter while increasing the ring height. In addition to these magnets, one magnet with a reduced cross-sectional area was studied. The aspect ratio selection was based on preliminary magnetic flux density simulations, which compared the magnetic flux density distribution and the potential radial force for different aspect ratios. To conduct the measurements, the field-cooled magnets were displaced in a lateral direction and then released, resulting in a damped oscillation. The dynamic stiffness constants were calculated for each bearing from the relation of three axis acceleration measurements for different field cooling heights. The comparison of the stiffness constants for the different bearings revealed an optimal aspect ratio for the given YBCO ring. This optimum is almost independent from the cooling height. The comparison between the two magnet rings with similar diameters and different heights was similar for the bearing characteristics at a low cooling height, whereas a significant reduction of stiffness was observed with a larger cooling distance. The difference is bigger for the magnet with a reduced height. The optimal aspect ratio as well as the stiffness dependence on the cross-sectional area was confirmed by simulations of the magnetic flux density distribution. © 2019 IOP Publishing Ltd.