10 results
Search Results
Now showing 1 - 10 of 10
- ItemThe PAC2MAN mission: A new tool to understand and predict solar energetic events(Les Ulis : EDP Sciences, 2015) Amaya, Jorge; Musset, Sophie; Andersson, Viktor; Diercke, Andrea; Höller, Christian; Iliev, Sergiu; Juhász, Lilla; Kiefer, René; Lasagni, Riccardo; Lejosne, Solène; Madi, Mohammad; Rummelhagen, Mirko; Scheucher, Markus; Sorba, Arianna; Thonhofer, StefanAn accurate forecast of flare and coronal mass ejection (CME) initiation requires precise measurements of the magnetic energy buildup and release in the active regions of the solar atmosphere. We designed a new space weather mission that performs such measurements using new optical instruments based on the Hanle and Zeeman effects. The mission consists of two satellites, one orbiting the L1 Lagrangian point (Spacecraft Earth, SCE) and the second in heliocentric orbit at 1AU trailing the Earth by 80° (Spacecraft 80, SC80). Optical instruments measure the vector magnetic field in multiple layers of the solar atmosphere. The orbits of the spacecraft allow for a continuous imaging of nearly 73% of the total solar surface. In-situ plasma instruments detect solar wind conditions at 1AU and ahead of our planet. Earth-directed CMEs can be tracked using the stereoscopic view of the spacecraft and the strategic placement of the SC80 satellite. Forecasting of geoeffective space weather events is possible thanks to an accurate surveillance of the magnetic energy buildup in the Sun, an optical tracking through the interplanetary space, and in-situ measurements of the near-Earth environment.
- ItemMagnetic flux-trapping of anisotropic-grown Y-Ba-Cu-O bulk superconductors during and after pulsed-field magnetizing processes(Milton Park : Taylor & Francis, 2014) Oka, T.; Yamada, Y.; Horiuchi, T.; Ogawa, J.; Fukui, S.; Sato, T.; Yokoyama, K.; Langer, M.The magnetic flux penetration into the melt-textured Y-Ba-Cu-O high temperature superconducting bulk magnets were precisely evaluated during and after the pulsed field magnetization processes operated at 30 K. The bulk magnets were carefully fabricated by the cold seeding method with use of a single and a pair of seed crystals composed of the Nd-Ba-Cu-O thin films. These seed crystals were put on the top surfaces of the precursors to let the large grains grow during the heat treatments. We observed the flux penetrations which occurred in the lower applied-field regions at around 3.1 T for the samples bearing the twin seeds than those of the single-seeded crystals at around 3.8 T. This means that the magnetic fluxes are capable of invading into the twin-seeded samples more easily than the single-seeds. It suggests that the anisotropic grain growths of parallel and normal to the rows of seed crystals affects the variations of Jc values with different distributions of the pinning centers, results in the preferential paths for the invading magnetic fluxes.
- ItemInvestigation of the strain-sensitive superconducting transition of BaFe1.8Co0.2As2 thin films utilizing piezoelectric substrates(Milton Park : Taylor & Francis, 2014) Trommler, S.; Hänisch, J.; Iida, K.; Kurth, F.; Schultz, L.; Holzapfel, B.; Hühne, R.The preparation of biaxially textured BaFe1.8Co0.2As2 thin films has been optimized on MgO single crystals and transfered to piezoelectric (001) Pb(Mg1/3Nb2/3)0.72Ti0.28O3 substrates. By utilizing the inverse piezoelectric effect the lattice parameter of these substrates can be controlled applying an electric field, leading to a induction of biaxial strain into the superconducting layer. High electric fields were used to achieve a total strain of up to 0.05% at low temperatures. A sharpening of the resistive transition and a shift of about 0.6 K to higher temperatures was found at a compressive strain of 0.035%.
- ItemBicrystalline grain boundary junctions of Co-doped and P-doped Ba-122 thin films(Milton Park : Taylor & Francis, 2014) Schmidt, S.; Döring, S.; Schmidl, F.; Kurth, F.; Iida, K.; Holzapfel, B.; Kawaguchi, T.; Mori, Y.; Ikuta, H.; Seidel, P.We prepared GB junctions of Ba(Fe0.9Co0.1)2As2 thin films on bicrystalline [00 l]-tilt SrTiO3 substrates. The junctions show clear Josephson effects. Electrical characterization shows asymmetric I-V characteristics which can be described within the resistively shunted junction (RSJ) model. A large excess current is observed. Their formal ICRN product is 20.2 μV at 4.2 K, which is decreased to 6.5 μV when taking Iex into account. Fabrication methods to increase this value are discussed. Additionally, measurements on GB junctions of BaFe2(As0.66P0.34)2 thin films on LSAT bicrystalline substrates are shown. Their symmetric RSJ/flux flow-behavior exhibits a formal ICRN product of 45 μV, whereas the excess corrected value is ll μV.
- ItemTemperature-dependent electric noise level in different iron-based superconductors(Milton Park : Taylor & Francis, 2014) Barone, C.; Pagano, S.; Bellingeri, E.; Ferdeghini, C.; Adamo, M.; Sarnelli, E.; Yokoyama, K.; Kurth, F.; Holzapfel, B; Iida, K.The magnetic flux penetration into the melt-textured Y-Ba-Cu-O high temperature superconducting bulk magnets were precisely evaluated during and after the pulsed field magnetization processes operated at 30 K. The bulk magnets were carefully fabricated by the cold seeding method with use of a single and a pair of seed crystals composed of the Nd-Ba-Cu-O thin films. These seed crystals were put on the top surfaces of the precursors to let the large grains grow during the heat treatments. We observed the flux penetrations which occurred in the lower applied-field regions at around 3.1 T for the samples bearing the twin seeds than those of the single-seeded crystals at around 3.8 T. This means that the magnetic fluxes are capable of invading into the twin-seeded samples more easily than the single-seeds. It suggests that the anisotropic grain growths of parallel and normal to the rows of seed crystals affects the variations of Jc values with different distributions of the pinning centers, results in the preferential paths for the invading magnetic fluxes.
- ItemNormally-off GaN transistors for power applications(Milton Park : Taylor & Francis, 2014) Hilt, O.; Bahat-Treidel, E.; Brunner, F.; Knauer, A.; Zhytnytska, R.; Kotara, P.; Wuerfl, J.Normally-off high voltage GaN-HFETs for switching applications are presented. Normally-off operation with threshold voltages of 1 V and more and with 5 V gate swing has been obtained by using p-type GaN as gate. Different GaN-based buffer types using doping and backside potential barriers have been used to obtain blocking strengths up to 1000 V. The increase of the dynamic on-state resistance is analyzed for the different buffer types. The best trade-off between low dispersion and high blocking strength was obtained for a modified carbon-doped GaN-buffer that showed a 2.6x increase of the dynamic on-state resistance for 500 V switching as compared to switching from 20 V off-state drain bias. Device operation up to 200 °C ambient temperature without any threshold voltage shift is demonstrated.
- ItemOverview: Tropospheric profiling: State of the art and future challenges - Introduction to the AMT special issue(München : European Geopyhsical Union, 2014) Cimini, D.; Rizi, V.; Di Girolamo, P.; Marzano, F.S.; Macke, A.; Pappalardo, G.; Richter, A.This paper introduces the Atmospheric Measurement Techniques special issue on tropospheric profiling, which was conceived to host full papers presenting the results shown at the 9th International Symposium on Tropospheric Profiling (ISTP9). ISTP9 was held in L'Aquila (Italy) from 3 to 7 September 2012, bringing together 150 scientists representing of 28 countries and 3 continents. The tropospheric profiling special issue collects the highlights of ISTP9, reporting recent advances and future challenges in research and technology development.
- ItemProzessmikrobiologie in landwirtschaftlichen Biogasanlagen : Ermittlung der mikrobiellen Diversität sowie von hauptsächlichen verfahrenstechnischen Einflussfaktoren auf die Mikroflora : Schlussbericht zum Forschungsverbund BIOGAS-BIOCOENOSIS : Laufzeit: 01.11.2011 bis 31.10.2013(Hannover : Technische Informationsbibliothek, 2014) Theuerl, Susanne; Klocke, Michael; Maus, Irene; Schlüter, Andreas; Benndorf, Dirk; Kohrs, Fabian; Hitzmann, Bernd; Beltramo, Tetyana[no abstract available]
- ItemDevelopment of the fabrication process and characterization of piezoelectric BaTiO3/epoxy composite used for coated ultrasonic transducer patterns in structural health monitoring(Cambridge : arXiv, 2016) Bareiro Ferreira, Oscar; Sridaran Venkat, Ramanan; Adam, Jens; Boller, ChristianStructural health monitoring (SHM) is based on integrating and/or adapting a sensor system into a structure such that a tolerable damage to occur can be monitored. This requires a network of transducers specifically when this SHM approach is considered as a monitoring system such as based on guided waves. A desirable solution would be to get a transducer network simply ‘printed’ on the structure considered once the network has been designed such as through a simulation approach. In the paper proposed the fabrication process and characterization of a piezoelectric composite to be used as an ultrasonic transducer for damage sensing of structures based on SHM using guided waves is first considered. The composite consists of piezoelectric BaTiO3 particles homogenously distributed in an epoxy resin matrix. A paste with a solid volume fraction of up to 50 vol% was prepared by the direct mechanical mixing of the piezoelectric particles in the epoxy matrix. Due to the ferroelectric properties of BaTiO3 the polarization of the composite is required with a high electric field prior to use. Two electrodes placed on both sides of the samples are required to measure the dielectric and electromechanical properties of the composite in the form of a thick film. The influence of the volume fraction of BaTiO3 on the dialectic properties and piezoelectric transversal constant (d33) of the piezoelectric composite will be shown. Beyond this more materials processing related work performance of those transducers will be demonstrated. This will be done in terms of getting those coated as a transducer pattern/network on a hosting structure after having had the transducer network determined through simulation. Validation of the approach will be done by looking at the transducer network’s performance in terms of detecting guided acoustic waves.
- ItemORCID Germany Consortium - Numbers and Figures(Meyrin : CERN , 2018) Vierkant, Paul; Pampel, Heinz; Bertelmann, Roland; Dreyer, BrittaThis poster shows the development and status of the ORCID Germany Consortium.