Search Results
Assessment of continuous vaginal logger-based temperature monitoring in fever-induced gilts
2013, Schmidt, Mariana, Ammon, Christian, Schon, Peter, Manteuffel, Christian, Hoffmann, Gundula
The aim of this study was to identify a low risk method to induce fever in gilts and to evaluate vaginal sensors for temperature monitoring. Therefore, a rhinitis atrophicans vaccine was used to induce fever to evaluate sensors and behavioral patterns. During 11 trials, two of four animals were injected with 2 mL of the vaccine Porcilis AR-T DF (Intervet) and the other two animals were treated with 2 mL of 0.9% NaCl as controls. A temperature logger (TRIX-8, LogTag Recorders, Auckland, New Zealand) was used to continuously monitor the vaginal temperature. Additionally, rectal temperatures were measured four times daily. The water consumption, food intake and locomotion behaviors of the animals were analysed one day before treatment and during the day of the treatment. The vaccine induced fever in all gilts, which occurred approximately 5.87 h after vaccination. The vaginal logger temperatures and the rectal temperatures showed a linear correlation in 21 vaccinated gilts (r = 0.86; p<0.0001) and 22 non-vaccinated gilts (r = 0.65; P<0.0001). The vaginal logger can be continuously used to measure the core temperature. Water intake decreased (p<0.0001) in the gilts with fever, whereas food intake did not change (p = 0.9411). The vaccinated gilts spent 79±16 more minutes per day lying after the vaccination (p<0.001) in comparison to the day before the vaccination. Treatment with this vaccine provides the opportunity to induce fever over a short time period (5.13 h) and mild sickness behavior in gilts to investigate disease indicators.
Field inter-comparison of eleven atmospheric ammonia measurement techniques
2010, von Bobrutzki, K., Braban, C.F., Famulari, D., Jones, S.K., Blackall, T., Smith, T.E.L., Blom, M., Coe, H., Gallagher, M., Ghalaieny, M., McGillen, M.R., Percival, C.J., Whitehead, J.D., Ellis, R., Murphy, J., Mohacsi, A., Pogany, A., Junninen, H., Rantanen, S., Sutton, M.A., Nemitz, E.
Eleven instruments for the measurement of ambient concentrations of atmospheric ammonia gas (NH3), based on eight different measurement methods were inter-compared above an intensively managed agricultural field in late summer 2008 in Southern Scotland. To test the instruments over a wide range of concentrations, the field was fertilised with urea midway through the experiment, leading to an increase in the average concentration from 10 to 100 ppbv. The instruments deployed included three wet-chemistry systems, one with offline analysis (annular rotating batch denuder, RBD) and two with online-analysis (Annular Denuder sampling with online Analysis, AMANDA; AiRRmonia), two Quantum Cascade Laser Absorption Spectrometers (a large-cell dual system; DUAL-QCLAS, and a compact system; c-QCLAS), two photo-acoustic spectrometers (WaSul-Flux; Nitrolux-100), a Cavity Ring Down Spectrosmeter (CRDS), a Chemical Ionisation Mass Spectrometer (CIMS), an ion mobility spectrometer (IMS) and an Open-Path Fourier Transform Infra-Red (OP-FTIR) Spectrometer. The instruments were compared with each other and with the average concentration of all instruments. An overall good agreement of hourly average concentrations between the instruments (R2>0.84), was observed for NH3 concentrations at the field of up to 120 ppbv with the slopes against the average ranging from 0.67 (DUAL-QCLAS) to 1.13 (AiRRmonia) with intercepts of −0.74 ppbv (RBD) to +2.69 ppbv (CIMS). More variability was found for performance for lower concentrations (<10 ppbv). Here the main factors affecting measurement precision are (a) the inlet design, (b) the state of inlet filters (where applicable), and (c) the quality of gas-phase standards (where applicable). By reference to the fast (1 Hz) instruments deployed during the study, it was possible to characterize the response times of the slower instruments.
Risk efficiency of irrigation to cereals in northeast Germany with respect to nitrogen fertilizer
2016, Meyer-Aurich, Andreas, Gandorfer, Markus, Trost, Benjamin, Ellmer, Frank, Baumecker, Michael
The potential role of irrigation of cereals as a response to climate change is under debate. Especially under temperate continental conditions empirical evidence of crop yield response to irrigation in interaction with nitrogen fertilizer supply is rare. Besides mean yield effects, irrigation reduces yield variance, which may be an incentive for farmers to use irrigation. This paper investigates the risk-efficiency of irrigation in cereal production in a temperate continental climate, based on data from a long term field experiment on a sandy soil. Irrigation and no irrigation of winter rye (Secale cereale) and winter barley (Hordeum vulgare) were investigated in three different nitrogen (N) fertilizer levels. Crop yield response data (1995–2010) to irrigation and N fertilizer were used to calculate net returns, certainty equivalents (CE) for different levels of risk aversion and the conditional value at risk (CVaR) as a downside risk indicator in two price scenarios. The scenarios were calculated with a total cost and a partial budget approach. Irrigation was found to be profit-maximizing in all partial budget calculations, which sometimes required higher N input to be profit-maximizing. Irrigation and N fertilizer reduction were identified as risk mitigation strategies, even though their impact was limited. Irrigation reduced the downside risk only in the partial budget calculations. The analysis based on the CE did not show improved risk efficiency with irrigated management options. In contrast, reduced fertilizer input proved to be risk efficient at specific levels of risk aversion. The price expectations of winter rye and winter barley had a much higher impact on the ranking of the management options than risk aversion based on the crop yield variances. At low crop prices for all levels of risk aversion, irrigation of winter barley and winter rye was only economically justified if fixed costs for irrigation were not taken into account. At high crop prices, irrigation of winter barley was also justified based on the total cost calculation. However, this advantage was only given at a very low level of risk aversion. With increasing levels of risk aversion irrigation was not efficient based on the CE in the total cost accounting scenario. In conclusion, irrigation of cereals can contribute to downside risk mitigation and increased profits, if fixed costs for irrigation are covered. However, this conclusion holds only when irrigation is combined with an increased N intensity. If total costs need to be accounted for, irrigation in cereals is not an appropriate risk reduction strategy and a reduction of N input is more effective.
A brief dataset on the model-based evaluation of the growth performance of Bacillus coagulans and l-lactic acid production in a lignin-supplemented medium
2017, Glaser, Robert, Venus, Joachim
The data presented in this article are related to the research article entitled “Model-based characterization of growth performance and l-lactic acid production with high optical purity by thermophilic Bacillus coagulans in a lignin-supplemented mixed substrate medium (R. Glaser and J. Venus, 2016) [1]”. This data survey provides the information on characterization of three Bacillus coagulans strains. Information on cofermentation of lignocellulose-related sugars in lignin-containing media is given. Basic characterization data are supported by optical-density high-throughput screening and parameter adjustment to logistic growth models. Lab scale fermentation procedures are examined by model adjustment of a Monod kinetics-based growth model. Lignin consumption is analyzed using the data on decolorization of a lignin-supplemented minimal medium.
Water footprint analysis for the assessment of milk production in Brandenburg (Germany)
2010, Drastig, K., Prochnow, A., Kraatz, S., Klauss, H., Plöchl, M.
The working group "Adaptation to Climate Change" at the Leibniz-Institute for Agricultural Engineering Potsdam-Bornim (ATB) is introduced. This group calculates the water footprint for agricultural processes and farms, distinguished into green water footprint, blue water footprint, and dilution water footprint. The green and blue water demand of a dairy farm plays a pivotal role in the regional water balance. Considering already existing and forthcoming climate change effects there is a need to determine the water cycle in the field and in housing for process chain optimisation for the adaptation to an expected increasing water scarcity. Resulting investments to boost water productivity and to improve water use efficiency in milk production are two pathways to adapt to climate change effects. In this paper the calculation of blue water demand for dairy farming in Brandenburg (Germany) is presented. The water used for feeding, milk processing, and servicing of cows over the time period of ten years was assessed in our study. The preliminary results of the calculation of the direct blue water footprint shows a decreasing water demand in the dairy production from the year 1999 with 5.98×109 L/yr to a water demand of 5.00×109 L/yr in the year 2008 in Brandenburg because of decreasing animal numbers and an improved average milk yield per cow. Improved feeding practices and shifted breeding to greater-volume producing Holstein-Friesian cow allow the production of milk in a more water sustainable way. The mean blue water consumption for the production of 1 kg milk in the time period between 1999 to 2008 was 3.94±0.29 L. The main part of the consumed water seems to stem from indirect used green water for the production of feed for the cows.
The MiLA tool: Modeling greenhouse gas emissions and cumulative energy demand of energy crop cultivation in rotation
2016, Peter, Christiane, Specka, Xenia, Aurbacher, Joachim, Peter Kornatz, Peter Kornatz, Herrmann, Christiane, Heiermann, Monika, Müller, Janine, Nendel, Claas
Crop rotations are part of current agricultural practice, since they and their effects can contribute to a sustainable agricultural cropping system. However, in current Life Cycle Assessment (LCA) studies, crop rotation effects are insufficiently considered, since these effects are difficult to measure. LCA studies from crop production typically take only one vegetation period into account. As a result, the consideration of how the assessed crop is influenced by the previous crop (crop rotation effects) including: (1) nutrient carryover, (2) reduction in operational requirements and (3) different intensity and timing of farming activities, is outside of the system boundary. However, ignoring these effects may lead to incorrect interpretation of LCA results and consequently to poor agricultural management as well as poor policy decisions. A new LCA tool called the “Model for integrative Life Cycle Assessment in Agriculture (MiLA)” is presented in this work. MiLA has been developed to assess GHG emissions and cumulative energy demands (CED) of cropping systems by taking the characteristics of crop cultivation in rotation into account. This tool enables the user to analyze cropping systems at farm level in order to identify GHG mitigation options and energy-efficient cropping systems. The tool was applied to a case study, including two crop rotations in two different regions in Germany with the goal of demonstrating the effectiveness of this tool on LCA results. Results show that including crop rotation effects can influence the GHG emission result of the individual crop by − 34% up to + 99% and the CED by − 16 up to + 89%. Expanding the system boundary by taking the whole crop rotation into account as well as providing the results based on different functional units improves LCA of energy crop production and helps those making the assessment to draw a more realistic picture of the interactions between crops while increasing the reliability of the LCA results.
Effect of densification variables on water resistance of corn cob briquettes
2019, Orisaleye, J.I., Jekayinfa, S.O., Pecenka, R., Onifade, T.B.
Solid biofuels can be used in heat and power generation applications. The utilization of agricultural residues for this purpose would be of immense benefit to rural communities of developing countries where the resource is being produced. Water resistance is a crucial property for transport and storage of biomass briquettes under moist climate conditions. In this study, the effect of process and material variables on the water resistance property of corn cob briquettes was investigated. The water resistance of briquettes produced ranged between 32.6 and 94.8% for die temperature between 90 °C and 120 °C, hold time from 7.5 to 15 minutes and die pressures between 9 and 15 MPa. A higher die temperature resulted in an increase in the water resistance of the biomass briquettes. Also, increasing the hold time improved the water resistance of the briquettes. Using a particle size less than 2.5 mm resulted in higher briquette water resistance property compared to briquettes produced from particle sizes greater than 2.5 mm. It was also shown that the effect of the interaction of the temperature with particle size on the water resistance of corn cob briquettes was statistically significant (p < 0.05). © 2019, Eesti Pollumajandusulikool. All rights reserved.
Hydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage
2014, Reza, M. Toufiq, Becker, Wolfgang, Sachsenheimer, Kerstin, Mumme, Jan
Near-infrared (NIR) spectroscopy was evaluated as a rapid method of predicting fiber components (hemicellulose, cellulose, lignin, and ash) and selective compounds of hydrochar and corresponding process liquor produced by hydrothermal carbonization (HTC) of maize silage. Several HTC reaction times and temperatures were applied and NIR spectra of both HTC solids and liquids were obtained and correlated with concentration determined from van-Soest fiber analysis, IC, and UHPLC. Partial least-squares regression was applied to calculate models for the prediction of selective substances. The model developed with the spectra had the best performance in 3–7 factors with a correlation coefficient, which varied between 0.9275–0.9880 and 0.9364–0.9957 for compounds in solid and liquid, respectively. Calculated root mean square errors of prediction (RMSEP) were 0.42–5.06 mg/kg. The preliminary results indicate that NIR, a widely applied technique, might be applied to determine chemical compounds in HTC solid and liquid.
An alternative to field retting: Fibrous materials based on wet preserved hemp for the manufacture of composites
2019, Gusovius, H.-J., Lühr, C., Hoffmann, T., Pecenka, R., Idler, C.
A process developed at the Leibniz Institute for Agricultural Engineering and Bioeconomy (ATB) for the supply and processing of wet-preserved fiber plants opens up new potential uses for such resources. The processing of industrial hemp into fiber materials and products thereof is undergoing experimental research along the value-added chain from the growing process through to the manufacturing of product samples. The process comprises the direct harvesting of the field-fresh hemp and the subsequent anaerobic storage of the entire plant material. Thus, process risk due to unfavorable weather conditions is prevented in contrast to common dew retting procedures. The effects of the anaerobic storage processes on the properties of the bast part of the plant material are comparable to the results of common retting procedures. Harvest storage, as well as further mechanical processing, leads to different geometrical properties compared to the bast fibers resulting from traditional post harvesting treatment and decortication. The fiber raw material obtained in this way is well suited to the production of fiberboards and the reinforcement of polymer or mineral bonded composites. The objective of this paper is to present recent research results on final products extended by a comprehensive overview of the whole supply chain in order to enable further understanding of the result influencing aspects of prior process steps.
Quantification of nitrogen balance components in a commercial broiler barn
2013, von Bobrutzki, K., Ammon, S., Berg, W., Fiedler, M.
Characterizing the respective nitrogen (N) use efficiency requires understanding the N flow of inputs and outputs from a commercial broiler barn. In this study, an N mass balance was performed for one entire growing cycle. The objectives were to quantify, sample, and analyze all N components entering and leaving the barn. The N from feed, chickens, and bedding material was considered as inputs, the outputs included the N accretion in mature broilers, the total N emissions (NTNE), the N accumulation in litter, and the N of mortality. Of particular relevance was the determination of an appropriate method to mirror the heterogenic texture of the litter. Litter samples were collected weekly according to a defined procedure. The major N input was feed N, accounting for 99% of the total N input. After the 36-day growing cycle, the N outputs were portioned as follows: 59% (1741.3 kg N) in mature broilers, 37% (1121.3 kg N) accumulated in litter, and 4% in NTNE (114.3 kg N). The N accumulations in broiler tissue and litter agree well with other studies. The measured emissions were consistently lower compared to other references, due to the fact that these references were mainly based on studies where broilers were raised on built-up litter. In contrast to in situ quantified N emissions in this study, other published values were assumed to be the difference of N between inputs and outputs. This study illustrates that extensive sampling of litter is a prerequisite for calculating litter masses. The accurate specification of the litter texture proved to be crucial within the mass balance approach. With this information, the feasible improvements within management practices can be identified.