58 results
Search Results
Now showing 1 - 10 of 58
- Item4D Biofabrication of fibrous artificial nerve graft for neuron regeneration(Bristol : IOP Publ., 2020) Apsite, Indra; Constante, Gissela; Dulle, Martin; Vogt, Lena; Caspari, Anja; Boccaccini, Aldo R.; Synytska, Alla; Salehi, Sahar; Ionov, LeonidIn this paper, we describe the application of the 4D biofabrication approach for the fabrication of artificial nerve graft. Bilayer scaffolds consisting of uniaxially aligned polycaprolactone-poly(glycerol sebacate) (PCL-PGS) and randomly aligned methacrylated hyaluronic acid (HA-MA) fibers were fabricated using electrospinning and further used for the culture of PC-12 neuron cells. Tubular structures form instantly after immersion of fibrous bilayer in an aqueous buffer and the diameter of obtained tubes can be controlled by changing bilayer parameters such as the thickness of each layer, overall bilayer thickness, and medium counterion concentration. Designed scaffolds showed a self-folded scroll-like structure with high stability after four weeks of real-time degradation. The significance of this research is in the fabrication of tuneable tubular nerve guide conduits that can simplify the current existing clinical treatment of neural injuries. © 2020 The Author(s). Published by IOP Publishing Ltd.
- ItemMWCNT induced negative real permittivity in a copolyester of Bisphenol-A with terephthalic and isophthalic acids(Bristol : IOP Publ., 2020) Özdemir, Zeynep Güven; Daşdan, Dolunay Şakar; Kavak, Pelin; Pionteck, Jürgen; Pötschke, Petra; Voit, Brigitte; SüngüMısırlıoğlu, BanuIn the present study, the negative real permittivity behavior of a copolyester of bisphenol-A with terephthalic acid and isophthalic acid (PAr) containing 1.5 to 7.5 wt% multi-walled carbon nanotubes (MWCNTs) have been investigated in detail. The structural and morphological analysis of the melt-mixed composites was performed by Fourier transform infrared spectroscopy using attenuated total reflection (FTIR-ATR), atomic force microscopy (AFM), X-ray diffraction (XRD), and light microscopy. The influences of the MWCNT filler on the AC impedance, complex permittivity, and AC conductivity of the PAr polymer matrix were investigated at different operating temperatures varied between 296 K and 373 K. The transition from a negative to positive real permittivity was observed at different crossover frequencies depending on the MWCNT content of the composites whereas pure PAr showed positive values at all frequencies. The negative real permittivity characteristic of the composites was discussed in the context of Drude model. © 2020 The Author(s). Published by IOP Publishing Ltd.
- ItemElastic properties of single crystal Bi12SiO20 as a function of pressure and temperature and acoustic attenuation effects in Bi12 MO20 (M = Si, Ge and Ti)(Bristol : IOP Publ., 2020) Haussühl, Eiken; Reichmann, Hans Josef; Schreuer, Jürgen; Friedrich, Alexandra; Hirschle, Christian; Bayarjargal, Lkhamsuren; Winkler, Björn; Alencar, Igor; Wiehl, Leonore; Ganschow, SteffenA comprehensive study of sillenite Bi12SiO20 single-crystal properties, including elastic stiffness and piezoelectric coefficients, dielectric permittivity, thermal expansion and molar heat capacity, is presented. Brillouin-interferometry measurements (up to 27 GPa), which were performed at high pressures for the first time, and ab initio calculations based on density functional theory (up to 50 GPa) show the stability of the sillenite structure in the investigated pressure range, in agreement with previous studies. Elastic stiffness coefficients c 11 and c 12 are found to increase continuously with pressure while c 44 increases slightly for lower pressures and remains nearly constant above 15 GPa. Heat-capacity measurements were performed with a quasi-adiabatic calorimeter employing the relaxation method between 2 K and 395 K. No phase transition could be observed in this temperature interval. Standard molar entropy, enthalpy change and Debye temperature are extracted from the data. The results are found to be roughly half of the previous values reported in the literature. The discrepancy is attributed to the overestimation of the Debye temperature which was extracted from high-temperature data. Additionally, Debye temperatures obtained from mean sound velocities derived by Voigt-Reuss averaging are in agreement with our heat-capacity results. Finally, a complete set of electromechanical coefficients was deduced from the application of resonant ultrasound spectroscopy between 103 K and 733 K. No discontinuities in the temperature dependence of the coefficients are observed. High-temperature (up to 1100 K) resonant ultrasound spectra recorded for Bi12 MO20 crystals revealed strong and reversible acoustic dissipation effects at 870 K, 960 K and 550 K for M = Si, Ge and Ti, respectively. Resonances with small contributions from the elastic shear stiffness c 44 and the piezoelectric stress coefficient e 123 are almost unaffected by this dissipation. © 2020 The Author(s). Published by IOP Publishing Ltd.
- ItemDelayed relaxation of highly excited naphthalene cations(Bristol : IOP Publ., 2020) Reitsma, G.; Hummert, J.; Dura, J.; Loriot, V.; Vrakking, M.J.J.; Lépine, F.; Kornilov, O.The efficiency of energy transfer in ultrafast electronic relaxation of molecules depends strongly on the complex interplay between electronic and nuclear motion. In this study we use wavelength-selected XUV pulses to induce relaxation dynamics of highly excited cationic states of naphthalene. Surprisingly, the observed relaxation lifetimes increase with the cationic excitation energy. We propose that this is a manifestation of a quantum mechanical population trapping that leads to delayed relaxation of molecules in the regions with a high density of excited states. © 2019 Published under licence by IOP Publishing Ltd.
- ItemStrong-Field Ionization of Linear Molecules by a Bichromatic Elliptically Polarized Laser Field with Coplanar Counterrotating or Corotating Components of Different Frequencies(Bristol : IOP Publ., 2020) Gazibegović-Busuladžić, A.; Busuladžić, M.; Čerkić, A.; Hasović, E.; Becker, W.; Milošević, D.B.We investigate strong-field ionization of linear molecules by a two-color laser field of frequencies rω and sω having coplanar counterrotating or corotating elliptically polarized components (ω is the fundamental laser field frequency and r and s are integers). Using the improved molecular strong-field approximation we analyze direct above-threshold ionization (ATI) and high-order ATI (HATI) spectra. More precisely, reflection and rotational symmetries of these spectra for linear molecules aligned in the laser-field polarization plane are considered. The reflection symmetries for particular molecular orientations, known to be valid for a bicircular field (this is the field with circularly polarized counterrotating components), are valid also for arbitrary component ellipticities. However, specific rotational symmetries that are satisfied for HATI by a bicircular field, are violated for an arbitrary elliptically polarized field with counterrotating components. For the corotating case and the N2 molecule we analyze molecular-orientation-dependent interferences and plateau structures for various ellipticities.
- ItemEmittance Reduction of RF Photoinjector Generated Electron Beams by Transverse Laser Beam Shaping(Bristol : IOP Publ., 2019) Gross, M.; Qian, H.J.; Boonpornprasert, P.; Chen, Y.; Good, J.D.; Huck, H.; Isaev, I.; Koschitzki, C.; Krasilnikov, M.; Lal, S.; Li, X.; Lishilin, O.; Loisch, G.; Melkumyan, D.; Mohanty, S.K.; Niemczyk, R.; Oppelt, A.; Shaker, H.; Shu, G.; Stephan, F.; Vashchenko, G.; Will, I.Laser pulse shaping is one of the key elements to generate low emittance electron beams with RF photoinjectors. Ultimately high performance can be achieved with ellipsoidal laser pulses, but 3-dimensional shaping is challenging. High beam quality can also be reached by simple transverse pulse shaping, which has demonstrated improved beam emittance compared to a transversely uniform laser in the 'pancake' photoemission regime. In this contribution we present the truncation of a Gaussian laser at a radius of approximately one sigma in the intermediate (electron bunch length directly after emission about the same as radius) photoemission regime with high acceleration gradients (up to 60 MV/m). This type of electron bunch is used e.g. at the European XFEL and FLASH free electron lasers at DESY, Hamburg site and is being investigated in detail at the Photoinjector Test facility at DESY in Zeuthen (PITZ). Here we present ray-tracing simulations and experimental data of a laser beamline upgrade enabling variable transverse truncation. Initial projected emittance measurements taken with help of this setup are shown, as well as supporting beam dynamics simulations. Additional simulations show the potential for substantial reduction of slice emittance at PITZ. © Published under licence by IOP Publishing Ltd.
- ItemCorrelations between the structure and superconducting properties of MT-YBaCuO(Bristol : IOP Publ., 2020) Prikhna, T.A.; Moshchill, V.E.; Rabier, J.; Chaud, X.; Joulain, A.; Pan, A.V.; Litskendorf, D.; Habisreuther, T.Comprehensive experimental results of fully oxidized (up to YBa2Cu3O6,9-7) melt-Textured YBaCuO materials with different microstructures are presented. These microstructures are built respectively: (1) with a high dislocations density but almost without twins (after high temperature treatment at 2 GPa) and (2) with a high twin density, but practically free from dislocations and stacking faults (after high temperature oxygenation at 10-16 MPa). It is shown that for attaining high critical current densities and fields of irreversibility (jc(H-c, 0 T)=9•104 A/cm2, H irr=9.7 T at 77 K), a high twin density in YBa2Cu3O6.9-7 matrix of MT-YBCO is required. The density of twins in fully oxidized materials depends on the distances between Y2BaCuO5 inclusions, larger twin densities are related to shorter distances between inclusions. The influence of phase composition of the initial powder mixtures on the distances between Y2BaCuO5 inclusions have been characterized and discussed. © Published under licence by IOP Publishing Ltd.
- ItemGeneration of elliptically polarized soft x rays using high-order harmonic generation with orthogonal two-color laser fields(Bristol : IOP Publ., 2020) Milošević, D.B.; Becker, W.High-order harmonic generation by orthogonally polarized two-color (OTC) laser fields is analysed using strong-field approximation and quantum-orbit theory. Results for the field components frequency ratio of 2:1 and 3:1 are presented and compared. We have shown that, depending on the relative phase between the field components, the shape of the high-harmonic spectrum can be very different from that obtained by a monochromatic linearly polarized laser field. It is also shown that it is possible to generate elliptically polarized high-order harmonics with very high photon energies using OTC laser field with the frequency ratio of 3:1 and a long fundamental wavelength. An effective relative phase control of the harmonic emission is demonstrated. The obtained results are explained using the quantum-orbit theory. © Published under licence by IOP Publishing Ltd.
- ItemThe influence of the driving-bicircular-field component intensities on the helicities of emitted high-order harmonics(Bristol : IOP Publ., 2019) Milošević, D.B.High-order harmonics generated by a linearly polarized laser field are also linearly polarized. Having in mind that for various application, such as the exploration of magnetic materials, chiral molecules etc., we need circularly polarized high harmonics which serve as coherent soft x-rays, we explore high-order harmonic generation by the so-called bicircular laser field. This field consists of two coplanar counter-rotating circularly polarized fields of different frequencies equal to integer multiples of a fundamental frequency ω. High harmonics generated by such field are circularly polarized with helicity alternating between +1 and −1. Combining a group of such harmonics, instead of obtaining a circularly polarized attosecond pulse train, one obtains a pulse with unusual polarization properties. But, if the harmonics of particular helicity are stronger, i.e., if we have helicity asymmetry in a high-harmonic energy interval, then it is possible to generate an elliptical or even circular pulse train. We theoretically investigated a wide range of bicircular field-component intensities (I1 and I2) and found regions where both the harmonic intensity is high and the helicity asymmetry is large. Particular attention is devoted to the ω−2ω and ω−3ω bicircular fields and atoms having the s and p ground states. In our calculations we use strong-field approximation and quantum-orbit theory. We show that, even in the extreme case of I2 = 8I1, for an ω−3ω bicircular field, high-order harmonic generation is more efficient than in the I2 = I1 case. The obtained results are explained analyzing the relevant electron trajectories and velocities, which follow from the quantum-orbit theory. For the atoms having p ground state the helicity asymmetry parameter is large for a wide range of high-harmonic photon energies, while for the atoms having s ground state the helicity asymmetry parameter can be large only for low harmonics. We confirm this by averaging the obtained results over the intensity distribution in the laser focus.
- ItemA review on stretchable magnetic field sensorics(Bristol : IOP Publ., 2020) Melzer, M.; Makarov, D.; Schmidt, O.G.The current establishment of stretchable electronics to form a seamless link between soft or even living materials and the digital world is at the forefront of multidisciplinary research efforts, bridging physics, engineering and materials science. Magnetic functionalities can provide a sense of displacement, orientation or proximity to this novel formulation of electronics. This work reviews the recent development of stretchable magnetic field sensorics relying on the combination of metallic thin films revealing a giant magnetoresistance effect with elastomeric materials. Stretchability of the magnetic nanomembranes is achieved by specific morphologic features (e.g. wrinkles or microcracks), which accommodate the applied tensile deformation while maintaining the electrical and magnetic integrity of the sensor device. The entire development, from the demonstration of the world's first elastically stretchable magnetic sensor to the realization of a technology platform for robust, ready-to-use elastic magnetosensorics is described. Soft giant magnetoresistive elements exhibiting the same sensing performance as on conventional rigid supports, but with fully strain invariant properties up to 270% stretching have been demonstrated. With their unique mechanical properties, these sensor elements readily conform to ubiquitous objects of arbitrary shapes including the human skin. Stretchable magnetoelectronic sensors can equip soft and epidermal electronic systems with navigation, orientation, motion tracking and touchless control capabilities. A variety of novel technologies, like electronic skins, smart textiles, soft robotics and actuators, active medical implants and soft consumer electronics will benefit from these new magnetic functionalities. © 2019 IOP Publishing Ltd.