83 results
Search Results
Now showing 1 - 10 of 83
- ItemAre Directed Evolution Approaches Efficient in Exploring Nature’s Potential to Stabilize a Lipase in Organic Cosolvents?(Basel : MDPI, 2017) Markel, Ulrich; Zhu, Leilei; Frauenkron-Machedjou, Victorine; Zhao, Jing; Bocola, Marco; Davari, Mehdi; Jaeger, Karl-Erich; Schwaneberg, UlrichDespite the significant advances in the field of protein engineering, general design principles to improve organic cosolvent resistance of enzymes still remain undiscovered. Previous studies drew conclusions to engineer enzymes for their use in water-miscible organic solvents based on few amino acid substitutions. In this study, we conduct a comparison of a Bacillus subtilis lipase A (BSLA) library—covering the full natural diversity of single amino acid substitutions at all 181 positions of BSLA—with three state of the art random mutagenesis methods: error-prone PCR (epPCR) with low and high mutagenesis frequency (epPCR-low and high) as well as a transversion-enriched Sequence Saturation Mutagenesis (SeSaM-Tv P/P) method. Libraries were searched for amino acid substitutions that increase the enzyme’s resistance to the water-miscible organic cosolvents 1,4-dioxane (DOX), 2,2,2-trifluoroethanol (TFE), and dimethyl sulfoxide (DMSO). Our analysis revealed that 5%–11% of all possible single substitutions (BSLA site-saturation mutagenesis (SSM) library) contribute to improved cosolvent resistance. However, only a fraction of these substitutions (7%–12%) could be detected in the three random mutagenesis libraries. To our knowledge, this is the first study that quantifies the capability of these diversity generation methods generally employed in directed evolution campaigns and compares them to the entire natural diversity with a single substitution. Additionally, the investigation of the BSLA SSM library revealed only few common beneficial substitutions for all three cosolvents as well as the importance of introducing surface charges for organic cosolvent resistance—most likely due to a stronger attraction of water molecules. © 2017 by the authors.
- ItemCatalytic Performance of Lanthanum Vanadate Catalysts in Ammoxidation of 2-Methylpyrazine(Basel : MDPI, 2016) Kalevaru, Venkata; Dhachapally, Naresh; Martin, AndreasThe influence of reaction conditions on the catalytic performance of lanthanum vanadate (La0.1V0.9Ox) catalyst in the ammoxidation of 2-methylpyrazine (MP) to 2-cyanopyarazine (CP) has been investigated. This novel catalytic material exhibited remarkably good performance with very high space-time-yields (STY) of CP. The reaction parameters such as the effect of temperature, gas hourly space velocity (GHSV) and all other reaction variables (e.g., NH3, air, and MP feed rates) on the catalytic performance were explored and optimized. For example, an increase in MP feed rate from 2 to >16 mmol/h led to decreased conversion of MP but increased the STY of CP significantly. Optimal performance was achieved when the reaction temperature was 420 °C and the molar ratio of 2-MP, ammonia, air, H2O and N2 in the feed gas was set to 1:7:26:13:22. Under these optimal reaction conditions, the catalyst showed a MP conversion of ~100%, CP selectivity of 86%, and STY of >500 gCP/(kgcat∙h). On the other hand, the formation of pyrazine (Py) as a by-product was found to be high when the NH3:MP ratio was lower at increased contact time. This suggests possible differences in the reaction mechanism pathways with respect to feed composition over La0.1V0.9Ox catalysts.
- ItemCpCo(III) Precatalysts for [2+2+2] Cycloadditions(Basel : MDPI, 2021) Fischer, Fabian; Eder, Michael; Hapke, MarkoCatalysts applied in cobalt-catalyzed cyclotrimerizations reactions in general rely on the use of Co(I) precatalysts or the in situ generation of Co(I) catalysts from Co(II) sources by reduction in the presence of steering ligands, often by addition of less noble metals. In this paper, we report the synthesis and properties of novel stable CpCo(III) complexes as precatalysts and their exemplary evaluation for application in catalytic [2+2+2] cycloadditions. The role of phosphite neutral ligands, as well as iodide and cyanide as anionic ligands, on the reactivity of the complexes was evaluated. A modified one-pot approach to the synthesis of Cp ring-functionalized Cp’Co(III) complexes was developed. The investigations demonstrated that CpCo(III) complexes can be directly applied as catalysts in catalytic cyclotrimerizations of triynes without reducing agents as additives. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemBimetallic Catalysts Containing Gold and Palladium for Environmentally Important Reactions(Basel : MDPI, 2016) Alshammari, Ahmad; Kalevaru, Venkata Narayana; Martin, AndreasSupported bimetallic nanoparticles (SBN) are extensively used as efficient redox catalysts. This kind of catalysis particularly using SBN has attracted immense research interest compared to their parent metals due to their unique physico-chemical properties. The primary objective of this contribution is to provide comprehensive overview about SBN and their application as promising catalysts. The present review contains four sections in total. Section 1 starts with a general introduction, recent progress, and brief summary of the application of SBN as promising catalysts for different applications. Section 2 reviews the preparation and characterization methods of SBN for a wide range of catalytic reactions. Section 3 concentrates on our own results related to the application of SBN in heterogeneous catalysis. In this section, the oxidation of cyclohexane to adipic acid (an eco-friendly and novel approach) will be discussed. In addition, the application of bimetallic Pd catalysts for vapor phase toluene acetoxylation in a fixed bed reactor will also be highlighted. Acetoxylation of toluene to benzyl acetate is another green route to synthesize benzyl acetate in one step. Finally, Section 4 describes the summary of the main points and also presents an outlook on the application of SBN as promising catalysts for the production of valuable products.
- ItemRole of SrCO3 on Photocatalytic Performance of SrTiO3-SrCO3 Composites(Basel : MDPI, 2022) Boga, Bíborka; Steinfeldt, Norbert; Moustakas, Nikolaos G.; Peppel, Tim; Lund, Henrik; Rabeah, Jabor; Pap, Zsolt; Cristea, Vasile-Mircea; Strunk, JenniferPerovskites such as SrTiO3 are interesting for photocatalytic applications due to their structure-related and electronic properties. These properties are influenced by the presence of SrCO3 which is often formed simultaneously during the hydrothermal synthesis of SrTiO3. In this study, SrTiO3-SrCO3 composites with different contents of SrCO3 (5–24 wt%) were synthesized. Their morphological, structural, and optical properties were investigated using complementary methods such as scanning electron microscopy (SEM), X-ray diffraction (XRD), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). Their photocatalytic activity was assessed during the degradation of diclofenac (DCFNa) in aqueous solution and CO2 photoreduction under Xe lamp irradiation. Improved photocatalytic efficiency in DCFNa degradation was observed for all the studied composites in comparison with SrTiO3, and the highest mineralization efficiency was obtained for the sample with 21 wt% SrCO3 content. The presence of SrCO3 led to an increased concentration of active species, such as •OH radicals. Otherwise, its presence inhibits CH4 and C2H6 production during CO2 photoreduction compared with pure SrTiO3.
- ItemLow-Temperature Magnetothermodynamics Performance of Tb1-xErxNi2 Laves-Phases Compounds for Designing Composite Refrigerants(Basel : MDPI, 2022) Ćwik, Jacek; Koshkid’ko, Yurii; Nenkov, Konstantin; Tereshina-Chitrova, Evgenia; Weise, Bruno; Kowalska, KarolinaIn this paper, the results of heat capacity measurements performed on the polycrystalline Tb1-xErxNi2 intermetallic compounds with x = 0.25, 0.5 and 0.75 are presented. The Debye temperatures and lattice contributions as well as the magnetic part of the heat capacity were determined and analyzed. The heat capacity measurements reveal that the substitution of Tb atoms for Er atoms leads to a linear reduction of the Curie temperatures in the investigated compounds. The ordering temperatures decrease from 28.3 K for Tb0.25Er0.75Ni2 to 12.9 K for Tb0.75Er0.25Ni2. Heat capacity measurements enabled us to calculate with good approximation the isothermal magnetic entropy ΔSmag and adiabatic temperature changes ΔTad for Tb1-xErxNi2, for the magnetic field value equal to 1 T and 2 T. The optimal molar ratios of individual Tb0.75Er0.25Ni2, Tb0.5Er0.5Ni2 and Tb0.25Er0.75Ni2 components in the final composite were theoretically determined. According to the obtained results, the investigated composites make promising candidates that can find their application as an active body in a magnetic refrigerator performing an Ericsson cycle at low temperatures. Moreover, for the Tb0.5Er0.5Ni2 compound, direct measurements of adiabatic temperature change in the vicinity of the Curie temperature in the magnetic field up to 14 T were performed. The obtained high-field results are compared to the data for the parent TbNi2 and ErNi2 compounds, and their magnetocaloric properties near the Curie temperature are analyzed in the framework of the Landau theory for the second-order phase transitions.
- ItemPressure- and Temperature-Dependent Crystallization Kinetics of Isotactic Polypropylene under Process Relevant Conditions(Basel : MDPI, 2021) Spoerer, Yvonne; Boldt, Regine; Androsch, René; Kuehnert, InesIn this study, a non-nucleated homopolymer (HP) and random copolymer (RACO), as well as a nucleated HP and heterophasic copolymer (HECO) were investigated regarding their crystallization kinetics. Using pvT-measurements and fast scanning chip calorimetry (FSC), the crystallization behavior was analyzed as a function of pressure, cooling rate and temperature. It is shown that pressure and cooling rate have an opposite influence on the crystallization temperature of the materials. Furthermore, the addition of nucleating agents to the material has a significant effect on the maximum cooling rate at which the formation of α-crystals is still possible. The non-nucleated HP and RACO materials show significant differences that can be related to the sterically hindering effect of the comonomer units of RACO on crystallization, while the nucleated materials HP and HECO show similar crystallization kinetics despite their different structures. The pressure-dependent shift factor of the crystallization temperature is independent of the material. The results contribute to the description of the relationship between the crystallization kinetics of the material and the process parameters influencing the injection-molding induced morphology. This is required to realize process control in injection molding in order to produce pre-defined morphologies and to design material properties.
- ItemUnderstanding Nonlinear Pulse Propagation in Liquid Strand-Based Photonic Bandgap Fibers(Basel : MDPI, 2021) Qi, Xue; Schaarschmidt, Kay; Li, Guangrui; Junaid, Saher; Scheibinger, Ramona; Lühder, Tilman; Schmidt, Markus A.Ultrafast supercontinuum generation crucially depends on the dispersive properties of the underlying waveguide. This strong dependency allows for tailoring nonlinear frequency conversion and is particularly relevant in the context of waveguides that include geometry-induced resonances. Here, we experimentally uncovered the impact of the relative spectral distance between the pump and the bandgap edge on the supercontinuum generation and in particular on the dispersive wave formation on the example of a liquid strand-based photonic bandgap fiber. In contrast to its air-hole-based counterpart, a bandgap fiber shows a dispersion landscape that varies greatly with wavelength. Particularly due to the strong dispersion variation close to the bandgap edges, nanometer adjustments of the pump wavelength result in a dramatic change of the dispersive wave generation (wavelength and threshold). Phase-matching considerations confirm these observations, additionally revealing the relevance of third order dispersion for interband energy transfer. The present study provides additional insights into the nonlinear frequency conversion of resonance-enhanced waveguide systems which will be relevant for both understanding nonlinear processes as well as for tailoring the spectral output of nonlinear fiber sources.
- ItemReal Time Predictions of VGF-GaAs Growth Dynamics by LSTM Neural Networks(Basel : MDPI, 2021) Dropka, Natasha; Ecklebe, Stefan; Holena, MartinThe aim of this study was to assess the aptitude of the recurrent Long Short-Term Memory (LSTM) neural networks for fast and accurate predictions of process dynamics in vertical-gradient-freeze growth of gallium arsenide crystals (VGF-GaAs) using datasets generated by numerical transient simulations. Real time predictions of the temperatures and solid–liquid interface position in GaAs are crucial for control applications and for process visualization, i.e., for generation of digital twins. In the reported study, an LSTM network was trained on 1950 datasets with 2 external inputs and 6 outputs. Based on network performance criteria and training results, LSTMs showed the very accurate predictions of the VGF-GaAs growth process with median root-mean-square-error (RMSE) values of 2 × 10−3. This deep learning method achieved a superior predictive accuracy and timeliness compared with more traditional Nonlinear AutoRegressive eXogenous (NARX) recurrent networks.
- ItemPolaron-Mediated Luminescence in Lithium Niobate and Lithium Tantalate and Its Domain Contrast(Basel : MDPI, 2018-5-15) Reichenbach, Philipp; Kämpfe, Thomas; Haußmann, Alexander; Thiessen, Andreas; Woike, Theo; Steudtner, Robin; Kocsor, Laura; Szaller, Zsuzsanna; Kovács, László; Eng, Lukas M.In this review article, we discuss photoluminescence phenomena mediated by polarons in lithium niobate (LNO). At first we present the fundamentals on polaron states in LNO and their energy levels, i.e., on free and bound electron polarons, on hole polarons as well as on bipolarons. We discuss the absorption measurements on reduced as well as on doped LNO that made the characterization of the formed polaron states possible by their absorption bands. Next, we proceed by reporting on the two polaron-mediated photoluminescence bands that have been observed in LNO: (1) A near-infrared luminescence band in the range of 1.5 eV shows a mono-exponential decay and a strong dependence on iron doping. This luminescence is emitted by bound polarons returning from an excited state to the ground state. (2) A luminescence band at visible wavelengths with a maximum at 2.6 eV shows a stretched-exponential decay and is strongly enhanced by optical damage resistant doping around the doping threshold. This luminescence stems from the recombination of free electron and hole polarons. The next major topic of this review are domain contrasts of the visible photoluminescence that have been observed after electrical poling of the substrate, as singly inverted domains show a slightly reduced and faster decaying luminescence. Subsequent annealing results in an exponential decrease of that domain contrast. We show that this contrast decay is strongly related to the mobility of lithium ions, thus confirming the role of polar defect complexes, including lithium vacancies, for these domain contrasts. Finally we discuss the extension of our investigations to lithium tantalate (LTO) samples. While the results on the domain contrast and its decay are similar to LNO, there are remarkable differences in their luminescence spectra.