16 results
Search Results
Now showing 1 - 10 of 16
- ItemNovel concept for VCSEL enhanced silicon photonic coherent transceiver(New York, NY : American Inst. of Physics, 2019) Seiler, Pascal M.; Ronniger, Gregor; Troppenz, Ute; Sigmund, Ariane; Moehrle, Martin; Peczek, Anna; Zimmermann, LarsWe present a novel concept for an integrated silicon photonic coherent transceiver using vertical-emitting laser sources at 1550 nm. In a state of the art external modulation configuration, we deploy a VCSEL on the transmit and a HCSEL on the receive side. We demonstrate the feasibility of this approach by externally modulating the VCSEL with QPSK at up to 28 Gbaud. We also perform experiments with the VCSEL-HCSEL configuration in a slave-master optical injection locking setup for future data center interconnects. The results show stable locking conditions and the VCSEL is detuned to perform predominant phase modulation. To the best of our knowledge, this is the first time direct phase modulation of a VCSEL under optical injection locking was demonstrated using two vertically emitting laser sources as master - and slave laser. © 2019 Author(s).
- ItemFabrication and investigation of three-dimensional ferroelectric capacitors for the application of FeRAM(New York : American Institute of Physics, 2016) Yeh, Chia-Pin; Lisker, Marco; Kalkofen, Bodo; Burte, Edmund P.Ferroelectric capacitors made by lead zirconate titanate (PZT) thin films and iridium electrodes are fabricated on three-dimensional structures and their properties are investigated. The iridium films are grown by Plasma Enhanced MOCVD at 300°C, while the PZT films are deposited by thermal MOCVD at different process temperatures between 450°C and 550°C. The step coverage and composition uniformity of the PZT films on trench holes and lines are investigated. Phase separation of PZT films has been observed on both 3D and planar structures. No clear dependences of the crystallization and composition of PZT on 3D structure topography have been found. STEM EDX line scans show a uniform Zr/(Zr+Ti) concentration ratio along the 3D profile but the variation of the Pb/(Zr+Ti) concentration ratio is large because of the phase separation. 3D ferroelectric capacitors show good ferroelectric properties but have much higher leakage currents than 2D ferroelectric capacitors. Nevertheless, during cycling tests the degradation of the remnant polarization between 2D and 3D capacitors is similar after 109 switching cycles. In addition, the sidewalls and bottoms of the 3D structures seem to have comparable remnant polarizations with the horizontal top surfaces.
- ItemHigh-temperature high-sensitivity AlN-on-SOI Lamb wave resonant strain sensor(New York, NY : American Inst. of Physics, 2018) Dou, Shaoxu; Qi, Mengke; Chen, Cong; Zhou, Hong; Wang, Yong; Shang, Zhengguo; Yang, Jing; Wang, Dengpan; Mu, XiaojingA piezoelectric AlN-on-SOI structured MEMS Lamb wave resonator (LWR) is presented for high-temperature strain measurement. The LWR has a composite membrane of a 1 μm thick AlN film and a 30 μm thick device silicon layer. The excited acoustic waves include Rayleigh wave and Lamb waves. A tensile strain sensor has been prepared with one LWR mounted on a uniaxial tensile plate, and its temperature characteristics from 15.4°C to 250°C and tensile strain behaviors from 0 μϵ to 400 μϵ of Rayleigh wave and S4 mode Lamb wave were tested. The temperature test verifies the adaptability of the tensile strain sensor to temperature up to 250°C, and S4 mode Lamb wave and Rayleigh wave represent almost the same temperature characteristics. The strain test demonstrates that S4 mode Lamb wave shows much higher strain sensitivity (-0.48 ppm/μϵ) than Rayleigh wave (0.05 ppm/μϵ) and confirms its advantage of strain sensitivity. Finally, for this one-LWR strain sensor, a method of beat frequency between S4 mode Lamb wave and Rayleigh wave is proposed for temperature compensation and high-sensitivity strain readout.
- ItemHigh temperature reactive ion etching of iridium thin films with aluminum mask in CF4/O2/Ar plasma(New York : American Institute of Physics, 2016) Yeh, Chia-Pin; Lisker, Marco; Kalkofen, Bodo; Burte, Edmund P.Reactive ion etching (RIE) technology for iridium with CF4/O2/Ar gas mixtures and aluminum mask at high temperatures up to 350 °C was developed. The influence of various process parameters such as gas mixing ratio and substrate temperature on the etch rate was studied in order to find optimal process conditions. The surface of the samples after etching was found to be clean under SEM inspection. It was also shown that the etch rate of iridium could be enhanced at higher process temperature and, at the same time, very high etching selectivity between aluminum etching mask and iridium could be achieved.
- ItemTransmitters and receivers in SiGe BiCMOS technology for sensitive gas spectroscopy at 222 - 270 GHz(New York, NY : American Inst. of Physics, 2019) Schmalz, K.; Rothbart, N.; Eissa, M.H.; Borngräber, J.; Kissinger, D.; Hübers, H.-W.This paper presents transmitter and receiver components for a gas spectroscopy system. The components are fabricated in IHP's 0.13 μm SiGe BiCMOS technology. Two fractional-N phase-locked loops are used to generate dedicated frequency ramps for the transmitter and receiver and frequency shift keying for the transmitter. The signal-to-noise ratio (SNR) for the absorption line of gaseous methanol (CH 3 OH) at 247.6 GHz is used as measure for the performance of the system. The implemented mixer-first receiver allows a high performance of the system due to its linearity up to an input power of -10 dBm. Using a transmitter-array with an output power of 7 dBm an SNR of 4660 (integration time of 2 ms for each data point) was obtained for the 247.6 GHz absorption line of CH 3 OH at 5 Pa. We have extended our single frequency-band system for 228 - 252 GHz to a 2-band system to cover the range 222 - 270 GHz by combining corresponding two transmitters and receivers with the frequency bands 222 - 256 GHz and 250 - 270 GHz on single transmitter- and receiver-chips. This 2-band operation allows a parallel spectra acquisition and therefore a high flexibility of data acquisition for the two frequency-bands. The 50 GHz bandwidth allows for highly specific and selective gas sensing. © 2019 Author(s).
- ItemOperando diagnostic detection of interfacial oxygen ‘breathing’ of resistive random access memory by bulk-sensitive hard X-ray photoelectron spectroscopy(London [u.a.] : Taylor & Francis, 2019) Niu, Gang; Calka, Pauline; Huang, Peng; Sharath, Sankaramangalam Ulhas; Petzold, Stefan; Gloskovskii, Andrei; Fröhlich, Karol; Zhao, Yudi; Kan, Jinfeng; Schubert, Markus Andreas; Bärwolf, Florian; Ren, Wei; Ye, Zuo-Guang; Perez, Eduardo; Wenger, Christian; Alff, Lambert; Schroeder, ThomasThe HfO2-based resistive random access memory (RRAM) is one of the most promising candidates for non-volatile memory applications. The detection and examination of the dynamic behavior of oxygen ions/vacancies are crucial to deeply understand the microscopic physical nature of the resistive switching (RS) behavior. By using synchrotron radiation based, non-destructive and bulk-sensitive hard X-ray photoelectron spectroscopy (HAXPES), we demonstrate an operando diagnostic detection of the oxygen ‘breathing’ behavior at the oxide/metal interface, namely, oxygen migration between HfO2 and TiN during different RS periods. The results highlight the significance of oxide/metal interfaces in RRAM, even in filament-type devices. IMPACT STATEMENT: The oxygen ‘breathing’ behavior at the oxide/metal interface of filament-type resistive random access memory devices is operandoly detected using hard X-ray photoelectron spectroscopy as a diagnostic tool. © 2019, © 2019 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.
- ItemCorrection: Interface-engineered reliable HfO2-based RRAM for synaptic simulation (Journal of Materials Chemistry C (2019) DOI: 10.1039/c9tc04880d)(London [u.a.] : RSC, 2019) Wang, Qiang; Niu, Gang; Roy, Sourav; Wang, Yankun; Zhang, Yijun; Wu, Heping; Zhai, Shijie; Bai, Wei; Shi, Peng; Song, Sannian; Song, Zhitang; Xie, Ya-Hong; Ye, Zuo-Guang; Wenger, Christian; Meng, Xiangjian; Ren, WeiThere was an error in the author list of this published article. The corresponding authors for this paper are Gang Niu (gangniu@xjtu.edu.cn) and Wei Ren (wren@mail.xjtu.edu.cn). The footnote indicating that Qiang Wang and Gang Niu contributed equally to the work was not intended. The corrected author list and notations are shown here. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers. © The Royal Society of Chemistry 2019.
- ItemControl of etch pit formation for epitaxial growth of graphene on germanium(Melville, NY : American Inst. of Physics, 2019) Becker, Andreas; Wenger, Christian; Dabrowski, JarekGraphene epitaxy on germanium by chemical vapor deposition is a promising approach to integrate graphene into microelectronics, but the synthesis is still accompanied by several challenges such as the high process temperature, the reproducibility of growth, and the formation of etch pits during the process. We show that the substrate cleaning by preannealing in molecular hydrogen, which is crucial to successful and reproducible graphene growth, requires a high temperature and dose. During both substrate cleaning and graphene growth, etch pits can develop under certain conditions and disrupt the synthesis process. We explain the mechanisms how these etch pits may form by preferential evaporation of substrate, how substrate topography is related to the state of the cleaning process, and how etch pit formation during graphene growth can be controlled by choice of a sufficiently high precursor flow. Our study explains how graphene can be grown reliably on germanium at high temperature and thereby lays the foundation for further optimization of the growth process. © 2019 Author(s).
- ItemOn the electronic properties of a single dislocation(College Park : American Institute of Physics Inc., 2014) Reiche, M.; Kittler, M.; Erfurth, W.; Pippel, E.; Sklarek, K.; Blumtritt, H.; Haehnel, A.; Uebensee, H.A detailed knowledge of the electronic properties of individual dislocations is necessary for next generation nanodevices. Dislocations are fundamental crystal defects controlling the growth of different nanostructures (nanowires) or appear during device processing. We present a method to record electric properties of single dislocations in thin silicon layers. Results of measurements on single screw dislocations are shown for the first time. Assuming a cross-section area of the dislocation core of about 1 nm2, the current density through a single dislocation is J = 3.8 × 1012 A/cm2 corresponding to a resistivity of ρ ≅ 1 × 10-8 Ω cm. This is about eight orders of magnitude lower than the surrounding silicon matrix. The reason of the supermetallic behavior is the high strain in the cores of the dissociated dislocations modifying the local band structure resulting in high conductive carrier channels along defect cores.
- ItemA novel engineered oxide buffer approach for fully lattice-matched SOI heterostructures(College Park, MD : Institute of Physics Publishing, 2010) Giussani, A.; Zaumseil, P.; Seifarth, O.; Storck, P.; Schroeder, T.Epitaxial (epi) oxides on silicon can be used to integrate novel device concepts on the canonical Si platform, including functional oxides, e.g. multiferroics, as well as alternative semiconductor approaches. For all these applications, the quality of the oxide heterostructure is a key figure of merit. In this paper, it is shown that, by co-evaporating Y2O3 and Pr2O3 powder materials, perfectly lattice-matched PrYO3(111) epilayers with bixbyite structure can be grown on Si(111) substrates. A high-resolution x-ray diffraction analysis demonstrates that the mixed oxide epi-films are single crystalline and type B oriented. Si epitaxial overgrowth of the PrYO3(111)/Si(111) support system results in flat, continuous and fully lattice-matched epi-Si(111)/PrYO3(111)/Si(111) silicon-on-insulator heterostructures. Raman spectroscopy proves the strain-free nature of the epi-Si films. A Williamson-Hall analysis of the mixed oxide layer highlights the existence of structural defects in the buffer, which can be explained by the thermal expansion coefficients of Si and PrYO3. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft.