Search Results
Flexible distributed Bragg reflectors from nanocolumnar templates
A flexible distributed Bragg reflector is made by the infiltration of a nanocolumnar array with polydimethyl siloxane oligomers. The high optical reflectance displayed by the final material is a direct consequence of the high refractive index contrast of the columnar layers whereas the structural stability is due to the polymer properties.
Temperature-induced switchable adhesion using nickel-titanium-polydimethylsiloxane hybrid surfaces
A switchable dry adhesive based on a nickel–titanium (NiTi) shape-memory alloy with an adhesive silicone rubber surface has been developed. Although several studies investigate micropatterned, bioinspired adhesive surfaces, very few focus on reversible adhesion. The system here is based on the indentation-induced two-way shape-memory effect in NiTi alloys. NiTi is trained by mechanical deformation through indentation and grinding to elicit a temperature-induced switchable topography with protrusions at high temperature and a flat surface at low temperature. The trained surfaces are coated with either a smooth or a patterned adhesive polydimethylsiloxane (PDMS) layer, resulting in a temperature-induced switchable surface, used for dry adhesion. Adhesion tests show that the temperature-induced topographical change of the NiTi influences the adhesive performance of the hybrid system. For samples with a smooth PDMS layer the transition from flat to structured state reduces adhesion by 56%, and for samples with a micropatterned PDMS layer adhesion is switchable by nearly 100%. Both hybrid systems reveal strong reversibility related to the NiTi martensitic phase transformation, allowing repeated switching between an adhesive and a nonadhesive state. These effects have been discussed in terms of reversible changes in contact area and varying tilt angles of the pillars with respect to the substrate surface.
Ageing of alkylthiol-stabilized gold nanoparticles
The ageing of spherical gold nanoparticles having 6-nm-diameter cores and a ligand shell of dodecanethiol is investigated under different storage conditions. Losses caused by agglomeration and changes in optical particle properties are quantified. Changes in colloidal stability are probed by analytical centrifugation in a polar solvent mixture. Chemical changes are detected by elementary analysis of particles and solvent. Fractionation occurs under all storage conditions. Ageing is not uniform but broadens the property distributions of the particles. Small-number statistics in the ligand shell density and the morphological heterogeneity of particles are possible explanations. Washing steps exacerbate ageing, a process that could not be fully reversed by excess ligands. Dry storage is not preferable to storage in solvent. Storage under inert argon atmosphere reduces losses more than all other conditions but could not prevent it entirely.
Shape-memory topographies on nickel–titanium alloys trained by embossing and pulse electrochemical machining
The two-way shape-memory effect (TWSME) in Nickel–titanium (NiTi) alloys is of interest for applications in aerospace, biomedicine, and microengineering due to its reversible shape recovery. In this study, the authors demonstrate two approaches to obtain switchable surface structures using the TWSME. Samples are structured using two surface geometries by either cold embossing, or pulse electrochemical machining (PECM). After planarization, a change from optically smooth to structured and vice versa is observed. The switch is induced through heating and cooling the sample above and below the phase transformation temperature. The protrusions reflect the pattern applied by the two processes. Both methods are promising for preparation of switchable metallic surfaces on larger areas.
A novel bioinspired switchable adhesive with three distinct adhesive states
A novel switchable adhesive, inspired by the gecko's fibrillar dry attachment system, is introduced. It consists of a patterned surface with an array of mushroom-shaped pillars having two distinct heights. The different pillar heights allow control of the pull-off force in two steps by application of a low and a high preload. For low preload, only the long pillars form contact, resulting in a low pull-off force. At higher preload, all pillars form contact, resulting in high pull-off force. Even further loading leads to buckling induced detachment of the pillars which corresponds to extremely low pull-off force. To achieve the respective samples a new fabrication method called double inking is developed, to achieve multiple-height pillar structures. The adhesion performance of the two-step switchable adhesive is analysed at varying preload and for different pillar aspect ratios and height relations. Finally, the deformation behavior of the samples is investigated by in situ monitoring.
Comment on "Sponge-templated preparation of high surface area graphene with ultrahigh capacitive deionization performance"
[no abstract available]