Filters

2011 - 20202

More filters

2020 - 20212
Reset filters

Settings

search.filters.applied.f.access: openAccess × Subject: Secondary ion mass spectrometry ×

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    High-temperature annealing of AlN films grown on 4H-SiC
    (New York, NY : American Inst. of Physics, 2020) Brunner, F.; Cancellara, L.; Hagedorn, S.; Albrecht, M.; Weyers, M.
    The effect of high-temperature annealing (HTA) at 1700 °C on AlN films grown on 4H-SiC substrates by metalorganic vapor phase epitaxy has been studied. It is shown that the structural quality of the AlN layers improves significantly after HTA similar to what has been demonstrated for AlN grown on sapphire. Dislocation densities reduce by one order of magnitude resulting in 8 × 108 cm-2 for a-type and 1 × 108 cm-2 for c-type dislocations. The high-temperature treatment removes pits from the surface by dissolving nanotubes and dislocations in the material. XRD measurements prove that the residual strain in AlN/4H-SiC is further relaxed after annealing. AlN films grown at higher temperature resulting in a lower as-grown defect density show only a marginal reduction in dislocation density after annealing. Secondary ion mass spectrometry investigation of impurity concentrations reveals an increase of Si after HTA probably due to in-diffusion from the SiC substrate. However, C concentration reduces considerably with HTA that points to an efficient carbon removal process (i.e., CO formation). © 2020 Author(s).
  • Thumbnail Image
    Item
    Investigation of emitter homogeneity on laser doped emitters
    (Amsterdam [u.a.] : Elsevier, 2011) Germershausen, S.; Bartholomäus, L.; Seidel, U.; Hanisch, N.; Schieferdecker, A.; Küsters, K.H.; Kittler, M.; Ametowobla, M.; Einsele, F.; Dallmann, G.
    The selective emitter formation by laser doping is a well known process to increase the efficiency of silicon solar cells [1], [2]. For the characterization of laser doped emitters, SIMS (Secondary Ion Mass Spectroscopy) and ECV (Electrochemical Capacitance Voltage Measurement) techniques are used to analyze the emitter profile [3]. It is very difficult to get acceptable result by SIMS on a textured surface, so only ECV can be used. It has been shown, that a charge carrier depth profile can be measured on a homogeneous emitter only by ECV. The use of laser doping results in a non-homogeneous emitter. We have shown that the emitter depth is not just a function of the pulse power, but in addition of the surface structure of the wafer. The texture seems responsible for a strong variability in the doping profile. It has been shown, that the ECV measurement is not applicable to characterize the emitter depth on laser doped areas, because of the microscopic inhomogeneities in the emitter on the macroscopic measurement area. The real emitter profiles are to complex to be characterized by SIMS or ECV. We have shown that the variation in the emitter profile is resulting from the texture in the laser-doped regions.