2 results
Search Results
Now showing 1 - 2 of 2
- ItemOptimizing the detection, ablation, and ion extraction efficiency of a single-particle laser ablation mass spectrometer for application in environments with low aerosol particle concentrations(Katlenburg-Lindau : Copernicus, 2020) Clemen, Hans-Christian; Schneider, Johannes; Klimach, Thomas; Helleis, Frank; Köllner, Franziska; Hünig, Andreas; Rubach, Florian; Mertes, Stephan; Wex, Heike; Stratmann, Frank; Welti, André; Kohl, Rebecca; Frank, Fabian; Borrmann, StephanThe aim of this study is to show how a newly developed aerodynamic lens system (ALS), a delayed ion extraction (DIE), and better electric shielding improve the efficiency of the Aircraft-based Laser ABlation Aerosol MAss spectrometer (ALABAMA). These improvements are applicable to single-particle laser ablation mass spectrometers in general. To characterize the modifications, extensive sizeresolved measurements with spherical polystyrene latex particles (PSL; 150-6000 nm) and cubic sodium chloride particles (NaCl; 400-1700 nm) were performed. Measurements at a fixed ALS position show an improved detectable particle size range of the new ALS compared to the previously used Liu-type ALS, especially for supermicron particles. At a lens pressure of 2.4 hPa, the new ALS achieves a PSL particle size range from 230 to 3240 nm with 50% detection efficiency and between 350 and 2000 nm with 95% detection efficiency. The particle beam divergence was determined by measuring the detection efficiency at variable ALS positions along the laser cross sections and found to be minimal for PSL at about 800 nm. Compared to measurements by singleparticle mass spectrometry (SPMS) instruments using Liutype ALSs, the minimum particle beam divergence is shifted towards larger particle sizes. However, there are no disadvantages compared to the Liu-type lenses for particle sizes down to 200 nm. Improvements achieved by using the DIE and an additional electric shielding could be evaluated by size-resolved measurements of the hit rate, which is the ratio of laser pulses yielding a detectable amount of ions to the total number of emitted laser pulses. In particular, the hit rate for multiply charged particles smaller than 500 nm is significantly improved by preventing an undesired deflection of these particles in the ion extraction field. Moreover, it was found that by using the DIE the ion yield of the ablation, ionization, and ion extraction process could be increased, resulting in up to 7 times higher signal intensities of the cation spectra. The enhanced ion yield results in a larger effective width of the ablation laser beam, which in turn leads to a hit rate of almost 100% for PSL particles in the size range from 350 to 2000 nm. Regarding cubic NaCl particles the modifications of the ALABAMA result in an up to 2 times increased detection efficiency and an up to 5 times increased hit rate. The need for such instrument modifications arises in particular for measurements of particles that are present in low number concentrations such as ice-nucleating particles (INPs) in general, but also aerosol particles at high altitudes or in pristine environments. Especially for these low particle number concentrations, improved efficiencies help to overcome the statistical limitations of single-particle mass spectrometer measurements. As an example, laboratory INP measurements carried out in this study show that the appli- cation of the DIE alone increases the number of INP mass spectra per time unit by a factor of 2 to 3 for the sampled substances. Overall, the combination of instrument modifications presented here resulted in an increased measurement efficiency of the ALABAMA for different particle types and particles shape as well as for highly charged particles. © 2020 Copernicus GmbH. All rights reserved.
- ItemA comparison of aerosol chemical and optical properties from the 1st and 2nd Aerosol Characterization Experiments(Milton Park : Taylor & Francis, 2016) Quinn, P.K.; Bates, T.S.; Coffman, D.J.; Coffman, Derek J.; Miller, T.L.; Johnson, J.E.; Covert, D.S.; Putaud, J.- P.; Neusüß, C.; Novakov, T.Shipboard measurements of aerosol chemical composition and optical properties were made during both ACE-1 and ACE-2. ACE-1 focused on remote marine aerosol minimally perturbed by continental sources. ACE-2 studied the outflow of European aerosol into the NE Atlantic atmosphere. A variety of air masses were sampled during ACE-2 including Atlantic, polar, Iberian Peninsula, Mediterranean, and Western European. Reported here are mass size distributions of non-sea salt (nss) sulfate, sea salt, and methanesulfonate and submicron and supermicron concentrations of black and organic carbon. Optical parameters include submicron and supermicron aerosol scattering and backscattering coefficients at 550 nm, the absorption coefficient at 550±20 nm, the Ångström exponent for the 550 and 700 nm wavelength pair, and single scattering albedo at 550 nm. All data are reported at the measurement relative humidity of 55%. Measured concentrations of nss sulfate aerosol indicate that, relative to ACE-1, ACE-2 aerosol during both marine and continental flow was impacted by continental sources. Thus, while sea salt controlled the aerosol chemical composition and optical properties of both the submicron and supermicron aerosol during ACE-1, it played a relatively smaller role in ACE-2. This is confirmed by the larger average Ångström exponent for ACE-2 continental aerosol of 1.2±0.26 compared to the ACE-1 average of -0.03±0.38. The depletion of chloride from sea salt aerosol in ACE-2 continental air masses averaged 55±25% over all particle sizes. This compares to the ACE-2 marine average of 4.8±18% and indicates the enhanced interaction of anthropogenic acids with sea salt as continental air masses are transported into the marine atmosphere. Single scattering albedos averaged 0.95±0.03 for ACE-2 continental air masses. Averages for ACE-2 and ACE-1 marine air masses were 0.98±0.01 and 0.99±0.01, respectively.