14 results
Search Results
Now showing 1 - 10 of 14
- ItemOn-chip mass spectrometric analysis in non-polar solvents by liquid beam infrared matrix-assisted laser dispersion/ionization(Berlin [u.a.] : Springer, 2021) Urban, Raphael D.; Fischer, Tillmann G.; Charvat, Ales; Wink, Konstantin; Krafft, Benjamin; Ohla, Stefan; Zeitler, Kirsten; Abel, Bernd; Belder, DetlevBy the on-chip integration of a droplet generator in front of an emitter tip, droplets of non-polar solvents are generated in a free jet of an aqueous matrix. When an IR laser irradiates this free liquid jet consisting of water as the continuous phase and the non-polar solvent as the dispersed droplet phase, the solutes in the droplets are ionized. This ionization at atmospheric pressure enables the mass spectrometric analysis of non-polar compounds with the aid of a surrounding aqueous matrix that absorbs IR light. This works both for non-polar solvents such as n-heptane and for water non-miscible solvents like chloroform. In a proof of concept study, this approach is applied to monitor a photooxidation of N-phenyl-1,2,3,4-tetrahydroisoquinoline. By using water as an infrared absorbing matrix, analytes, dissolved in non-polar solvents from reactions carried out on a microchip, can be desorbed and ionized for investigation by mass spectrometry.
- ItemDeveloping a Laser Induced Liquid Beam Ion Desorption Spectral Database as Reference for Spaceborne Mass Spectrometers(Malden, Mass. : American Geophysical Union, 2022) Klenner, Fabian; Umair, Muhammad; Walter, Sebastian H. G.; Khawaja, Nozair; Hillier, Jon; Nölle, Lenz; Zou, Zenghui; Napoleoni, Maryse; Sanderink, Arnaud; Zuschneid, Wilhelm; Abel, Bernd; Postberg, FrankSpaceborne impact ionization mass spectrometers, such as the Cosmic Dust Analyzer on board the past Cassini spacecraft or the SUrface Dust Analyzer being built for NASA's upcoming Europa Clipper mission, are of crucial importance for the exploration of icy moons in the Solar System, such as Saturn's moon Enceladus or Jupiter's moon Europa. For the interpretation of data produced by these instruments, analogue experiments on Earth are essential. To date, thousands of laboratory mass spectra have been recorded with an analogue experiment for impact ionization mass spectrometers. Simulation of mass spectra of ice grains in space is achieved by a Laser Induced Liquid Beam Ion Desorption (LILBID) approach. The desorbed cations or anions are analyzed in a time-of-flight mass spectrometer. The amount of unstructured raw data is increasingly challenging to sort, process, interpret and compare with data from space. Thus far this has been achieved manually for individual mass spectra because no database containing the recorded reference spectra was available. Here we describe the development of a comprehensive, extendable database containing cation and anion mass spectra from the laboratory LILBID facility. The database is based on a Relational Database Management System with a web server interface and enables filtering of the laboratory data using a wide range of parameters. The mass spectra can be compared not only with data from past and future space missions but also mass spectral data generated by other, terrestrial, techniques. The validated and approved subset of the database is available for general public (https://lilbid-db.planet.fu-berlin.de).
- ItemCurvature model for nanoparticle size effects on peptide fibril stability and molecular dynamics simulation data(Amsterdam [u.a.] : Elsevier, 2022) John, Torsten; Martin, Lisandra L.; Risselada, Herre Jelger; Abel, BerndNanostructured surfaces are widespread in nature and are being further developed in materials science. This makes them highly relevant for biomolecules, such as peptides. In this data article, we present a curvature model and molecular dynamics (MD) simulation data on the influence of nanoparticle size on the stability of amyloid peptide fibrils related to our research article entitled “Mechanistic insights into the size-dependent effects of nanoparticles on inhibiting and accelerating amyloid fibril formation” (John et al., 2022) [1]. We provide the code to perform MD simulations in GROMACS 4.5.7 software of arbitrarily chosen biomolecule oligomers adsorbed on a curved surface of chosen nanoparticle size. We also provide the simulation parameters and data for peptide oligomers of Aß40, NNFGAIL, GNNQQNY, and VQIYVK. The data provided allows researchers to further analyze our MD simulations and the curvature model allows for a better understanding of oligomeric structures on surfaces.
- ItemMixed-ligand lanthanide complexes supported by ditopic bis(imino-methyl)-phenol/calix[4]arene macrocycles: synthesis, structures, and luminescence properties of [Ln2(L2)(MeOH)2] (Ln = La, Eu, Tb, Yb)(London : Soc., 2020) Ullmann, Steve; Hahn, Peter; Mini, Parvathy; Tuck, Kellie L.; Kahnt, Axel; Abel, Bernd; Gutierrez Suburu, Matias E.; Strassert, Cristian A.; Kersting, BertholdThe lanthanide binding ability of a macrocyclic ligand H6L2 comprising two bis(iminomethyl)phenol and two calix[4]arene units has been studied. H6L2 is a ditopic ligand which provides dinuclear neutral complexes of composition [Ln2(L2)(MeOH)2] (Ln = La (1), Eu (2), Tb (3), and Yb (4)) in very good yield. X-ray crystal structure analyses for 2 and 3 show that (L2)6- accommodates two seven coordinated lanthanide ions in a distorted monocapped trigonal prismatic/octahedral coordination environment. UV-vis spectroscopic titrations performed with La3+, Eu3+, Tb3+ and Yb3+ ions in mixed MeOH/CH2Cl2 solution (I = 0.01 M NBu4PF6) reveal that a 2 : 1 (metal : ligand) stoichiometry is present in solution, with log K11 and K21 values ranging from 5.25 to 6.64. The ratio α = K11/K21 of the stepwise formation constants for the mononuclear (L2 + M = ML2, log K11) and the dinuclear complexes (ML2 + M = M2L2, log K21) was found to be invariably smaller than unity indicating that the binding of the first Ln3+ ion augments the binding of the second Ln3+ ion. The present complexes are less luminescent than other seven-coordinated Eu and Tb complexes, which can be traced to vibrational relaxation of excited EuIII and TbIII states by the coligated MeOH and H2O molecules and/or low-lying ligand-to-metal charge-transfer (LMCT) states. © 2020 The Royal Society of Chemistry.
- ItemRole of Reaction Intermediate Diffusion on the Performance of Platinum Electrodes in Solid Acid Fuel Cells(Basel : MDPI, 2021) Lorenz, Oliver; Kühne, Alexander; Rudolph, Martin; Diyatmika, Wahyu; Prager, Andrea; Gerlach, Jürgen W.; Griebel, Jan; Winkler, Sara; Lotnyk, Andriy; Anders, André; Abel, BerndUnderstanding the reaction pathways for the hydrogen oxidation reaction (HOR) and the oxygen reduction reaction (ORR) is the key to design electrodes for solid acid fuel cells (SAFCs). In general, electrochemical reactions of a fuel cell are considered to occur at the triple-phase boundary where an electrocatalyst, electrolyte and gas phase are in contact. In this concept, diffusion processes of reaction intermediates from the catalyst to the electrolyte remain unconsidered. Here, we unravel the reaction pathways for open-structured Pt electrodes with various electrode thicknesses from 15 to 240 nm. These electrodes are characterized by a triple-phase boundary length and a thickness-depending double-phase boundary area. We reveal that the double-phase boundary is the active catalytic interface for the HOR. For Pt layers ≤ 60 nm, the HOR rate is rate-limited by the processes at the gas/catalyst and/or the catalyst/electrolyte interface while the hydrogen surface diffusion step is fast. For thicker layers (>60 nm), the diffusion of reaction intermediates on the surface of Pt be-comes the limiting process. For the ORR, the predominant reaction pathway is via the triple-phase boundary. The double-phase boundary contributes additionally with a diffusion length of a few nanometers. Based on our results, we propose that the molecular reaction mechanism at the electrode interfaces based upon the triple-phase boundary concept may need to be extended to an effective area near the triple-phase boundary length to include all catalytically relevant diffusion processes of the reaction intermediates. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemEffect of morphology on the photoelectrochemical activity of TiO2 self-organized nanotube arrays(Basel : MDPI, 2020) Ennaceri, Houda; Fischer, Kristina; Hanus, Kevin; Chemseddine, Abdelkrim; Prager, Andrea; Griebel, Jan; Kühnert, Mathias; Schulze, Agnes; Abel, BerndIn the present work, highly ordered titanium dioxide (TiO2) nanotube anodes were grown using a rapid anodization process. The photoelectrochemical performances of these electrodes strongly depend on the anodization conditions. Parameters such as electrolyte composition, anodization potential and anodization time are shown to affect the geometrical parameters of TiO2 nanotubes. The optimal anodization parameters are determined by photocurrent measurements, linear sweep voltammetry and electrochemical impedance spectroscopy. The thickness of the tube wall and its homogeneity is shown to strongly depend on the anodization potential, and the formation mechanism is discussed. This study permits the optimization of the photocurrent density and contributes to further improvement of the photoelectrochemical water-splitting performance of TiO2 nanotube photoelectrodes. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemCryo-printed microfluidics enable rapid prototyping for optical-cell analysis(Heidelberg : Springer, 2022) Garmasukis, Rokas; Hackl, Claudia; Dusny, Christian; Elsner, Christian; Charvat, Ales; Schmid, Andreas; Abel, BerndThis paper highlights an innovative, low-cost rapid-prototyping method for generating microfluidic chips with extraordinary short fabrication times of only a few minutes. Microchannels and inlet/outlet ports are created by controlled deposition of aqueous microdroplets on a cooled surface resulting in printed ice microstructures, which are in turn coated with a UV-curable acrylic cover layer. Thawing leaves an inverse imprint as a microchannel structure. For an exemplary case, we applied this technology for creating a microfluidic chip for cell-customized optical-cell analysis. The chip design includes containers for cell cultivation and analysis. Container shape, length, position, and angle relative to the main channel were iteratively optimized to cultivate and analyze different cell types. With the chip, we performed physiological analyses of morphologically distinct prokaryotic Corynebacterium glutamicum DM1919, eukaryotic Hansenula polymorpha RB11 MOX-GFP, and phototrophic Synechocystis sp. PCC 6803 cells via quantitative time-lapse fluorescence microscopy. The technology is not limited to rapid prototyping of complex biocompatible microfluidics. Further exploration may include printing with different materials other than water, printing on other substrates in-situ biofunctionalization, the inclusion of electrodes and many other applications.
- ItemEstradiol Removal by Adsorptive Coating of a Microfiltration Membrane(Basel : MDPI, 2021) Niavarani, Zahra; Breite, Daniel; Prager, Andrea; Abel, Bernd; Schulze, AgnesThis work demonstrates the enhancement of the adsorption properties of polyethersulfone (PES) microfiltration membranes for 17β-estradiol (E2) from water. This compound represents a highly potent endocrine-disrupting chemical (EDC). The PES membranes were modified with a hydrophilic coating functionalized by amide groups. The modification was performed by the interfacial reaction between hexamethylenediamine (HMD) or piperazine (PIP) as the amine monomer and trimesoyl chloride (TMC) or adipoyl chloride (ADC) as the acid monomer on the surface of the membrane using electron beam irradiation. The modified membranes and the untreated PES membrane were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water permeance measurements, water contact angle measurements, and adsorption experiments. Furthermore, the effects of simultaneous changes in four modification parameters: amine monomer types (HMD or PIP), acid monomer types (TMC or ADC), irradiation dosage (150 or 200 kGy), and the addition of toluene as a swelling agent, on the E2 adsorption capacity were investigated. The results showed that the adsorption capacities of modified PES membranes toward E2 are >60%, while the unmodified PES membrane had an adsorption capacity up to 30% for E2 under similar experimental conditions, i.e., an enhancement of a factor of 2. Next to the superior adsorption properties, the modified PES membranes maintain high water permeability and no pore blockage was observed. The highlighted results pave the way to develop efficient low-cost, stable, and high-performance adsorber membranes.
- ItemWeak electron irradiation suppresses the anomalous magnetization of N-doped diamond crystals(Weinheim : Wiley-VCH, 2021) Setzer, Annette; Esquinazi, Pablo D.; Daikos, Olesya; Scherzer, Tom; Pöppl, Andreas; Staacke, Robert; Lühmann, Tobias; Pezzagna, Sebastien; Knolle, Wolfgang; Buga, Sergei; Abel, Bernd; Meijer, JanSeveral diamond bulk crystals with a concentration of electrically neutral single substitutional nitrogen atoms of ≲80 ppm, the so-called C or P1 centers, are irradiated with electrons at 10 MeV energy and low fluence. The results show a complete suppression of the irreversible behavior in field and temperature of the magnetization below 30 K, after a decrease in ≲40 ppm in the concentration of C centers produced by the electron irradiation. This result indicates that magnetic C centers are at the origin of the large hysteretic behavior found recently in nitrogen-doped diamond crystals. This is remarkable because of the relatively low density of C centers, stressing the extraordinary role of the C centers in triggering those phenomena in diamond at relatively high temperatures. After annealing the samples at high temperatures in vacuum, the hysteretic behavior is partially recovered.
- ItemMagnetic field and angle-dependent photoluminescence of a fiber-coupled nitrogen vacancy rich diamond(Melville, NY : American Inst. of Physics, 2021) Wunderlich, Ralf; Staacke, Robert; Knolle, Wolfgang; Abel, Bernd; Meijer, JanHere, we investigate the magnetic field dependent photoluminescence (PL) of a fiber-coupled diamond single crystal with a high density of nitrogen vacancy (NV) centers. Angle-dependent magnetic field sweep measurements between 0 and 111 mT were performed using an oscillating illumination combined with lock-in techniques. Besides the expected superposed PL of differently oriented NV centers, a zoo of features in the PL are found. These features can be associated with level anti-crossings and cross relaxations. In particular, PL measurements allowed us to detect auto-cross relaxation between coupled NV centers. Moreover, the PL measurements at low magnetic fields show dips suggesting an interaction of NV centers with additional spin defects. The results presented here are not only a study for NV-based fiber-coupled sensors made of diamond, but also show a way to investigate with manageable effort and purely an optical multispin interaction with at least one NV center as a constituent.