7 results
Search Results
Now showing 1 - 7 of 7
- ItemNew insights into the structure of nanoporous carbons from NMR, Raman, and pair distribution function analysis(Washington D.C. : American Chemical Society, 2015) Forse, Alexander C.; Merlet, Céline; Allan, Phoebe K.; Humphreys, Elizabeth K.; Griffin, John M.; Aslan, Mesut; Zeiger, Marco; Presser, Volker; Gogotsi, Yury; Grey, Clare P.The structural characterization of nanoporous carbons is a challenging task as they generally lack long-range order and can exhibit diverse local structures. Such characterization represents an important step toward understanding and improving the properties and functionality of porous carbons, yet few experimental techniques have been developed for this purpose. Here we demonstrate the application of nuclear magnetic resonance (NMR) spectroscopy and pair distribution function (PDF) analysis as new tools to probe the local structures of porous carbons, alongside more conventional Raman spectroscopy. Together, the PDFs and the Raman spectra allow the local chemical bonding to be probed, with the bonding becoming more ordered for carbide-derived carbons (CDCs) synthesized at higher temperatures. The ring currents induced in the NMR experiment (and thus the observed NMR chemical shifts for adsorbed species) are strongly dependent on the size of the aromatic carbon domains. We exploit this property and use computer simulations to show that the carbon domain size increases with the temperature used in the carbon synthesis. The techniques developed here are applicable to a wide range of porous carbons and offer new insights into the structures of CDCs (conventional and vacuum-annealed) and coconut shell-derived activated carbons.
- ItemElectrospinning and electrospraying of silicon oxycarbide-derived nanoporous carbon for supercapacitor electrodes(Amsterdam : Elsevier, 2016) Tolosa, Aura; Krüner, Benjamin; Jäckel, Nicolas; Aslan, Mesut; Vakifahmetoglu, Cekdar; Presser, VolkerIn this study, carbide-derived carbon fibers from silicon oxycarbide precursor were synthesized by electrospinning of a commercially available silicone resin without adding a carrier polymer for the electrospinning process. The electrospun fibers were pyrolyzed yielding SiOC. Modifying the synthesis procedure, we were able to obtain electrosprayed SiOC beads instead of fibers. After chlorine treatment, nanoporous carbon with a specific surface area of up to 2394 m2·g-1 was obtained (3089 m2·g-1 BET). Electrochemical characterization of the SiOC-CDC either as free-standing fiber mat electrodes or polymer-bound bead films was performed in 1 M tetraethylammonium tetrafluoroborate in acetonitrile (TEA-BF4 in ACN). The electrospun fibers presented a high gravimetric capacitance of 135 F·g-1 at 10 mV·s-1 and a very high power handling, maintaining 63 % of the capacitance at 100 A·g-1. Comparative data of SiOC-CDC beads and fibers show enhanced power handling for fiber mats only when the fiber network is intact, that is, a lowered performance was observed when using crushed mats that employ polymer binder.
- ItemImproved Capacitive Deionization Performance of Mixed Hydrophobic / Hydrophilic Activated Carbon Electrodes(Bristol : IOP Publishing, 2016) Aslan, Mesut; Zeiger, Marco; Jäckel, Nicolas; Grobelsek, Ingrid; Weingarth, Daniel; Presser, VolkerCapacitive deionization (CDI) is a promising salt removal technology with high energy efficiency when applied to low molar concentration aqueous electrolytes. As an interfacial process, ion electrosorption during CDI operation is sensitive to the pore structure and the total pore volume of carbon electrodes limit the maximum salt adsorption capacity (SAC). Thus, activation of carbons as a widely used method to enhance the porosity of a material should also be highly attractive for improving SAC values. In our study, we use easy-to-scale and facile-to-apply CO2 activation at temperatures between 950 °C and 1020 °C to increase the porosity of commercially available activated carbon. While the pore volume and surface area can be significantly increased up to 1.51 cm3/g and 2113 m2/g, this comes at the expense of making the carbon more hydrophobic. We present a novel strategy to still capitalize the improved pore structure by admixing as received (more hydrophilic) carbon with CO2 treated (more hydrophobic) carbon for CDI electrodes without using membranes. This translates in an enhanced charge storage ability in high and low molar concentrations (1 M and 5 mM NaCl) and significantly improved CDI performance (at 5 mM NaCl). In particular, we obtain stable CDI performance at 0.86 charge efficiency with 13.1 mg/g SAC for an optimized 2:1 mixture (by mass).
- ItemThermal conductivity and temperature profiles in carbon electrodes for supercapacitors(Amsterdam : Elsevier, 2014) Burheim, Odne S.; Aslan, Mesut; Atchison, Jennifer S.; Presser, VolkerThe thermal conductivity of supercapacitor film electrodes composed of activated carbon (AC), AC with 15 mass% multi-walled carbon nanotubes (MWCNTs), AC with 15 mass% onion-like carbon (OLC), and only OLC, all mixed with polymer binder (polytetrafluoroethylene), has been measured. This was done for dry electrodes and after the electrodes have been saturated with an organic electrolyte (1 M tetraethylammonium-tetrafluoroborate in acetonitrile, TEA-BF4). The thermal conductivity data was implemented in a simple model of generation and transport of heat in a cylindrical cell supercapacitor systems. Dry electrodes showed a thermal conductivity in the range of 0.09-0.19 W K-1 m-1 and the electrodes soaked with an organic electrolyte yielded values for the thermal conductivity between 0.42 and 0.47 W K-1 m-1. It was seen that the values related strongly to the porosity of the carbon electrode materials. Modeling of the internal temperature profiles of a supercapacitor under conditions corresponding to extreme cycling demonstrated that only a moderate temperature gradient of several degrees Celsius can be expected and which depends on the ohmic resistance of the cell as well as the wetting of the electrode materials.
- ItemPerformance evaluation of conductive additives for activated carbon supercapacitors in organic electrolyte(Amsterdam : Elsevier, 2016) Jäckel, Nicolas; Weingarth, Daniel; Schreiber, Anna; Krüner, Benjamin; Zeiger, Marco; Tolosa Rodriguez, Aura Monserrat; Aslan, Mesut; Presser, VolkerIn this study, we investigate two different activated carbons and four conductive additive materials, all produced in industrial scale from commercial suppliers. The two activated carbons differed in porosity: one with a narrow microporous pore size distribution, the other showed a broader micro-mesoporous pore structure. Electrochemical benchmarking was done in one molar tetraethylammonium tetrafluoroborate in acetonitrile. Comprehensive structural, chemical, and electrical characterization was carried out by varied techniques. This way, we correlate the electrochemical performance with composite electrode properties, such as surface area, pore volume, electrical conductivity, and mass loading for different admixtures of conductive additives to activated carbon. The electrochemical rate handling (from 0.1 A g−1 to 10 A g−1) and long-time stability testing via voltage floating (100 h at 2.7 V cell voltage) show the influence of functional surface groups on carbon materials and the role of percolation of additive particles.
- ItemCapacitive deionization using biomass-based microporous salt-templated heteroatom-doped carbons(Hoboken, NJ : Wiley, 2015) Porada, Slawomir; Schipper, Florian; Aslan, Mesut; Antonietti, Markus; Presser, Volker; Fellinger, Tim-PatrickMicroporous carbons are an interesting material for electrochemical applications. In this study, we evaluate several such carbons without/with N or S doping with regard to capacitive deionization. For this purpose, we extent the salt-templating synthesis towards biomass precursors and S-doped microporous carbons. The sample with the largest specific surface area (2830 m2 g−1) showed 1.0 wt % N and exhibited a high salt-sorption capacity of 15.0 mg g−1 at 1.2 V in 5 mM aqueous NaCl. While being a promising material from an equilibrium performance point of view, our study also gives first insights to practical limitations of heteroatom-doped carbon materials. We show that high heteroatom content may be associated with a low charge efficiency. The latter is a key parameter for capacitive deionization and is defined as the ratio between the amounts of removed salt molecules and electrical charge.
- ItemGraphitization as a universal tool to tailor the potential-dependent capacitance of carbon supercapacitors(Hoboken, NJ : Wiley, 2014) Weingarth, Daniel; Zeiger, Marco; Jäckel, Nicolas; Aslan, Mesut; Feng, Guang; Presser, VolkerMost efforts to improve the energy density of supercapacitors are currently dedicated to optimized porosity or hybrid devices employing pseudocapacitive elements. Little attention has been given to the effects of the low charge carrier density of carbon on the total material capacitance. To study the effect of graphitization on the differential capacitance, carbon onion (also known as onion-like carbon) supercapacitors are chosen. The increase in density of states (DOS) related to the low density of charge carriers in carbon materials is an important effect that leads to a substantial increase in capacitance as the electrode potential is increased. Using carbon onions as a model, it is shown that this phenomenon cannot be related only to geometric aspects but must be the result of varying graphitization. This provides a new tool to significantly improve carbon supercapacitor performance, in addition to having significant consequences for the modeling community where carbons usually are approximated to be ideal metallic conductors. Data on the structure, composition, and phase content of carbon onions are presented and the correlation between electrochemical performance and electrical resistance and graphitization is shown. Highly graphitic carbons show a stronger degree of electrochemical doping, making them very attractive for enhancing the capacitance.