6 results
Search Results
Now showing 1 - 6 of 6
- ItemThe Effect of Iron and Vanadium in VOy/Ce1-xFexO2-δ Catalysts in Low-Temperature Selective Catalytic Reduction of NOx by Ammonia(Weinheim : WileyY-VCH Verlag, 2020) Keller, Sonja; Agostini, Giovanni; Antoni, Hendrik; Kreyenschulte, Carsten R.; Atia, Hanan; Rabeah, Jabor; Bentrup, Ursula; Brückner, AngelikaSupported VOy/Ce1-xFexO2-δ catalysts (x=0, 0.5, 0.1, 0.2) and bare supports were prepared and tested in selective catalytic reduction (SCR) of NOx by NH3 between 150 and 300 °C with a GHSV of 70 000 h−1. Iron was found to be beneficial for the activity of the pristine supports, reaching 80 % conversion at 275 °C. When vanadium was additionally introduced into the system, iron was found to be detrimental for NOx-conversion. To derive structure-reactivity relationships, V-free supports and VOy/Ce1-xFexO2-δ catalysts were characterized by XRD, XPS, Raman spectroscopy and TEM. In situ XANES, as well as operando DRIFTS and EPR measurements were performed to study the behavior of the catalysts under reaction conditions. Up to an iron content of x=0.1, a solid Ce1-xFexO2-δ solution was formed. Higher iron contents led to formation of iron oxide agglomerates. These agglomerates, as well as an increased amount of surface oxygen species were found to be responsible for increased NOx-conversion over of pure supports. For V-containing catalysts, an interaction of Fe and V centers could be found. Under reaction conditions, Fe3+ was preferentially reduced instead of V5+, decreasing the catalytic activity of VOy/Ce1-xFexO2-δ. © 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.
- ItemSynergistic Nanostructured MnOx/TiO2 Catalyst for Highly Selective Synthesis of Aromatic Imines(Weinheim : Wiley-VCH, 2021) Sudarsanam, Putla; Köckritz, Angela; Atia, Hanan; Amin, Mohamad Hassan; Brückner, AngelikaThis work reports the development of a synergistic nanostructured MnOx/TiO2 catalyst, with highly dispersed MnOx nanoparticles (4.5±1 nm) on shape-controlled TiO2 nanotubes (8–11 nm width and 120–280 nm length), for selective synthesis of valuable aromatic imines at industrially important conditions. Pristine TiO2 nanotubes exhibited 97 % imine selectivity at a 38.3 % benzylamine conversion, whereas very low imine selectivity was obtained over commercial TiO2 materials, indicating the catalytic significance of shape-controlled TiO2 nanotubes. The MnOx nanoparticle/TiO2 nanotube (10 wt% Mn) catalyst calcined at 400 °C showed the best activity with 95.6 % benzylamine conversion and 99.9 % imine selectivity. This catalyst exhibited good recyclability for four times and is effective for converting numerous benzylamines into higher yields of imines. The high catalytic performance of MnOx/TiO2 nanotubes was attributed to higher number of redox sites (Mn3+), high dispersion of Mn species, and shape-controlled structure of TiO2, indicating that this catalyst could be a promising candidate for selective oxidation reactions. © 2021 The Authors. ChemCatChem published by Wiley-VCH GmbH
- ItemDevelopment of Active and Stable Low Nickel Content Catalysts for Dry Reforming of Methane(Basel : MDPI, 2017-5-16) Ha, Quan Luu Manh; Armbruster, Udo; Atia, Hanan; Schneider, Matthias; Lund, Henrik; Agostini, Giovanni; Radnik, Jörg; Vuong, Huyen Thanh; Martin, AndreasMethane dry reforming (DRM) was investigated over highly active Ni catalysts with low metal content (2.5 wt %) supported on Mg-Al mixed oxide. The aim was to minimize carbon deposition and metal sites agglomeration on the working catalyst which are known to cause catalyst deactivation. The solids were characterized using N2 adsorption, X-ray diffraction, temperature-programmed reduction, X-ray photoelectron spectroscopy, and UV-Vis diffuse reflectance spectroscopy. The results showed that MgO-Al2O3 solid solution phases are obtained when calcining Mg-Al hydrotalcite precursor in the temperature range of 550–800 °C. Such phases contribute to the high activity of catalysts with low Ni content even at low temperature (500 °C). Modifying the catalyst preparation with citric acid significantly slows the coking rate and reduces the size of large octahedrally coordinated NiO-like domains, which may easily agglomerate on the surface during DRM. The most effective Ni catalyst shows a stable DRM course over 60 h at high weight hourly space velocity with very low coke deposition. This is a promising result for considering such catalyst systems for further development of an industrial DRM technology.
- ItemNb-modified Ce/Ti oxide catalyst for the selective catalytic reduction of NO with NH3 at low temperature(Basel : MDPI, 2018) Mosrati, Jawaher; Atia, Hanan; Eckelt, Reinhard; Lund, Henrik; Agostini, Giovanni; Bentrup, Ursula; Rockstroh, Nils; Keller, Sonja; Armbruster, Udo; Mhamdi, MouradRecently, great attention has been paid to Ceria-based materials for selective catalytic reduction (SCR) with NH3 owing to their unique redox, oxygen storage, and acid-base properties. Two series of bimetallic catalysts issued from Titania modified by Ce and Nb were prepared by the one-step sol-gel method (SG) and by the sol-gel route followed by impregnation (WI). The resulting core-shell and bulk catalysts were tested in NH3-SCR of NOx. The impregnated Nb5/Ce40/Ti100 (WI) catalyst displayed 95% NOx conversion at 200 °C (GHSV = 60,000 mL·g−1·h−1, 1000 ppm NOx, 1000 ppm NH3, 5% O2/He) without forming N2O. The catalysts were characterized by various methods including ICP-OES, N2-physisorption, XRD, Raman, NH3-TPD, DRIFTS, XPS, and H2-TPR. The results showed that the introduction of Nb decreases the surface area and strengthens the surface acidity. This behavior can be explained by the strong interaction between Ceria and Titania which generates Ce-O-Ti units, as well as a high concentration of amorphous or highly dispersed Niobia. This should be the reason for the excellent performance of the catalyst prepared by the sol-gel method followed by impregnation. Furthermore, Nb5/Ce40/Ti100 (WI) has the largest NH3 adsorption capacity, which is helpful to promote the NH3-SCR reaction. The long-term stability and the effect of H2O on the catalysts were also evaluated.
- ItemDevelopment of Highly Stable Low Ni Content Catalyst for Dry Reforming of CH4-Rich Feedstocks(Weinheim : WILEY-VCH Verlag, 2020) Ha, Quan Luu Manh; Lund, Henrik; Kreyenschulte, Carsten; Bartling, Stephan; Atia, Hanan; Vuong, Than Huyen; Wohlrab, Sebastian; Armbruster, UdoHighly active and coking-resistant Ni catalysts suited for the dry reforming of CH4-rich gases (70 vol %, e. g. biogas or sour natural gas) were prepared starting from a Mg-rich Mg−Al hydrotalcite support precursor. Calcination at 1000 °C yields two phases, MgO and MgAl2O4 spinel. Complexation-deposition of Ni with citric acid on the preformed support as well as lanthanum addition yields a catalyst with remarkably low carbon accumulation over 100 h on stream attributed to both high Ni dispersion and preferred interactions of Ni with MgO on MgAl2O4. © 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.
- ItemSynthesis of flow‐compatible Ru-Me/Al2O3 catalysts and their application in hydrogenation of 1-iodo-4-nitrobenzene([Cham] : Springer International Publishing, 2021) Sebek, Michael; Atia, Hanan; Steinfeldt, NorbertThe development of an active, selective, and long-term stable heterogeneous catalyst for the reductive hydrogenation of substituted nitrorarenes in continuous operation mode is still challenging. In this work, Ru based nanoparticles catalysts promoted with different transition metals (Zn, Co, Cu, Sn, or Fe) were supported on alumina spheres using spray wet impregnation method. The freshly prepared catalysts were characterized using complementary methods including scanning transmission electron microscopy (STEM) and temperature programmed reduction (TPR). The hydrogenation of 1-iodo-4-nitrobenzene served as model reaction to assess the catalytic performance of the prepared catalysts. The addition of the promotor affected the reducibility of Ru nanoparticles as well as the performance of the catalyst in the hydrogenation reaction. The highest yield of 4-iodoaniline (89 %) was obtained in a continuous flow process using Ru-Sn/Al2O3. The performance of this catalyst was also followed in a long-term experiment. With increasing operation time, a catalyst deactivation occurred which could only briefly compensate by an increase of the reaction temperature.