Search Results
Molecular monitoring of the poplar wood chip microbiome as a function of storage strategy
One of the most challenging aspects of using wood chips as renewable energy source is the loss of biomass related to storage. Therefore, we installed three outdoor industrial-scale piles (250 m³) of poplar wood chips and monitored the bacterial and fungal communities by next-generation sequencing over a storage period of 120 d. Two of the three piles were supplemented with calcium dihydroxide (Ca(OH)2) (1.5%, 3% w/w) in order to test its potential as alkaline stabilization agent to preserve woody biomass during storage. Shifts in the microbial community composition occurred almost entirely in the beginning of the storage experiment, which we attribute to the temperature rise of up to 60 °C within the first week of storage. Later, however, we found little changes. Independent of Ca(OH)2 concentration, a consortium of lignocellulolytic and thermotolerant microorganisms dominated the stored wood chip microbiota emphasizing their role as key players during wood decomposition. Although the addition of Ca(OH)2 altered the physicochemical properties of wood chips, it did not prevent loss of biomass. Especially the pH was increased in Ca(OH)2 treated piles. However, only minor differences in the microbial communities’ composition were detected following Ca(OH)2 addition, highlighting the microbes tolerance towards and adaptation to changing environmental conditions.
The potential of calcium hydroxide to reduce storage losses: A four months monitoring study of spruce wood chip piles at industrial scale
The objective of this study was to investigate the effect of an alkaline additive on the storage of wood chips from Norway spruce forest residues. Piles of untreated and calcium hydroxide treated wood chips (250 m3) were set up and investigated for four months. It was demonstrated that adding Ca(OH)2 to moist wood chips decreased the dry matter loss by 6%. This was attributed to the increase of the pH to a level of 8, rendering the habitat less suitable for fungal colonisation. The results suggest the set-up storage strategy as a potential alternative method for preserving wood chips when long term storage is required.
Establishment of a Laboratory Scale Set-Up with Controlled Temperature and High Humidity to Investigate Dry Matter Losses of Wood Chips from Poplar during Storage
The aim of this work was to improve the understanding of dry matter losses (DML) that occur in wood chips during the initial phase of storage in outdoor piles. For this purpose, a laboratory scale storage chamber was developed and investigated regarding its ability to recreate the conditions that chips undergo during the initial phase of outdoor storage. Three trials with poplar Max-4 (Populus maximowiczii Henry Populus nigra L.) chips were performed for 6–10 weeks in the storage chamber under controlled temperature and assisted humidity. Two different setups were investigated to maintain a high relative humidity (RH) inside the storage chamber; one using water containers, and one assisted with a humidifier. Moisture content (MC) and DML of the chips were measured at different storage times to evaluate their storage behaviour in the chamber. Additionally, microbiological analyses of the culturable fraction of saproxylic microbiota were performed, with a focus on mesophilic fungi, but discriminating also xerophilic fungi, and mesophilic bacteria, with focus on actinobacteria, in two trials, to gain a view on the poplar wood chip-inhabiting microorganisms as a function of storage conditions (moisture, temperature) and time. Results show that DML up to 8.8–13.7% occurred in the chips within 6–10 storage weeks. The maximum DML were reached in the trial using the humidifier, which seemed a suitable technique to keep a high RH in the testing chamber, and thus, to analyse the wood chips in conditions comparable to those in outdoor piles during the initial storage phase.