7 results
Search Results
Now showing 1 - 7 of 7
- ItemDetermination of the OH content of glasses(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1995) Ebendorff-Heidepriem, Heike; Ehrt, DorisThe most widely used method for determination of the OH content of glasses is the IR spectroscopy. The absorption bands in the range of 2500 to 4000 cm⁻¹ are due to the fundamental stretching vibrations of OH groups having different degrees of association. The calibration of the absorption coefficient, α, of an OH band requires the determination of the absolute OH content of some samples by another method than IR spectroscopy. Comparing water outgassing method with ¹H NMR spectroscopy, a large difference in the OH content was observed. Therefore, it is more appropriate to use solely the absorption coefficient as a relative measure of the true OH content. If certain requirements are met, the quantitative analysis of the absorption coefficient of different glass samples is justified.
- ItemResonance-Induced Dispersion Tuning for Tailoring Nonsolitonic Radiation via Nanofilms in Exposed Core Fibers(Weinheim : Wiley VCH, 2020) Lühder, Tilman A.K.; Schaarschmidt, Kay; Goerke, Sebastian; Schartner, Erik P.; Ebendorff-Heidepriem, Heike; Schmidt, Markus A.Efficient supercontinuum generation demands for fine-tuning of the dispersion of the underlying waveguide. Resonances introduced into waveguide systems can substantially improve nonlinear dynamics in ultrafast supercontinuum generation via modal hybridization and formation of avoided crossings. Using the example of exposed core fibers functionalized by nanofilms with sub-nanometer precision both zero-dispersion and dispersive wave emission wavelengths are shifted by 227 and 300 nm, respectively, at tuning slopes higher than 20 nm/nm. The presented concept relies on dispersion management via induced resonances and can be straightforwardly extended to other deposition techniques and film geometries such as multilayers or 2D materials. It allows for the creation of unique dispersion landscapes, thus tailoring nonlinear dynamics and emission wavelengths and for making otherwise unsuitable waveguides relevant for ultrafast nonlinear photonics. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- ItemBiomedical sensing and imaging with optical fibers—Innovation through convergence of science disciplines(College Park : American Institute of Physics, 2018) Li, Jiawen; Ebendorff-Heidepriem, Heike; Gibson, Brant C.; Greentree, Andrew D.; Hutchinson, Mark R.; Jia, Peipei; Kostecki, Roman; Liu, Guozhen; Orth, Antony; Ploschner, Martin; Schartner, Erik P.; Warren-Smith, Stephen C.; Zhang, Kaixin; Tsiminis, Georgios; Goldys, EwaThe probing of physiological processes in living organisms is a grand challenge that requires bespoke analytical tools. Optical fiber probes offer a minimally invasive approach to report physiological signals from specific locations inside the body. This perspective article discusses a wide range of such fiber probes developed at the Australian Research Council Centre of Excellence for Nanoscale BioPhotonics. Our fiber platforms use a range of sensing modalities, including embedded nanodiamonds for magnetometry, interferometric fiber cavities for refractive index sensing, and tailored metal coatings for surface plasmon resonance sensing. Other fiber probes exploit molecularly sensitive Raman scattering or fluorescence where optical fibers have been combined with chemical and immunosensors. Fiber imaging probes based on interferometry and computational imaging are also discussed as emerging in vivo diagnostic devices. We provide examples to illustrate how the convergence of multiple scientific disciplines generates opportunities for the fiber probes to address key challenges in real-time in vivo diagnostics. These future fiber probes will enable the asking and answering of scientific questions that were never possible before.
- ItemOptical spectroscopy of rare earth ions in glasses(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 1998) Ebendorff-Heidepriem, Heike; Ehrt, DorisThe relationships between host glass composition and optical properties of rare earth ions were studied by means of absorption and emission spectroscopy. Eu³⁺ and Tb³⁺ were found to be appropriate indicator ions for determining the properties of the local environment around rare earth ions. Er³⁺ and Nd³⁺ ions are widely used in lasers and amplifiers. The knowledge of the compositional influence on the spectroscopic parameters of rare earth ions enabled the modeling of the emission properties of important Er³⁺ and Nd³⁺ transitions in order to figure out the Optimum host glasses. Fluoride phosphate and phosphate glasses are attractive candidates for lasers and amplifiers. In these glasses, the degree of covalency between the rare earth ions and surrounding ligands mainly affects the spectroscopic parameters of rare earth ions such as Judd-Ofelt parameters and electron-phonon coupling strength. The increase of the electron-phonon coupling strength with the phosphate content is responsible for the decrease of the Er³⁺ emission intensity at 540 nm. Otherwise, it increases the Er³⁺ emission intensity at 1.5 µm in the fluoride phosphate glasses. The lower microparameters of Nd³⁺ cross relaxation in phosphate glasses cause the higher lifetimes of the Nd³⁺ ⁴F₃/₂ laser State at higher Nd³⁺ concentrations with respect to fluoride phosphate glasses. The energy transfer to OH groups in phosphate glasses decreases the hfetime and emission intensity of the laser State of both Er³⁺ and Nd³⁺ ions.
- ItemExtruded suspended core fibers from lanthanum-aluminum-silicate glass(Washington, DC : OSA, 2021) Litzkendorf, Doris; Matthes, Anne; Schwuchow, Anka; Dellith, Jan; Wondraczek, Katrin; Ebendorff-Heidepriem, HeikeWe report the use of the extrusion technique at highest temperatures to date (975 °C-1000 °C) for the fabrication of suspended core fibers (SCFs) from glass with molar composition 65 SiO2-20 Al2O3-15 La2O3 (SAL65). Through adjusting die design and fabrication conditions, extruded preforms for fibers with two different core sizes (1.2 µm and 3.1 µm) were successfully produced. Cross-sectional microstructure and material loss of these fibers highlight the potential of the extrusion technique for fabrication of microstructured optical fibers from glasses with high softening temperature and thus high thermal and mechanical stability. © 2020. All rights reserved.
- ItemImpact of rare earth doping on the luminescence of lanthanum aluminum silicate glasses for radiation sensing(Washington, DC : OSA, 2022) Shaw, Ruth E.; Kalnins, Christopher A. G.; Whittaker, Carly A.; Moffatt, Jillian E.; Tsiminis, Georgios; Klantsataya, Elizaveta; Ottaway, David; Spooner, Nigel A.; Litzkendorf, Doris; Matthes, Anne; Schwuchow, Anka; Wondraczek, Katrin; Ebendorff-Heidepriem, HeikeLarge core soft glass fibers have been demonstrated to be promising candidates as intrinsic fiber sensors for radiation detection and dosimetry applications. Doping with rare earth ions enhanced their radiation sensitivity. SiO2-Al2O3-La2O3 (SAL) glasses offer easy fabrication of large core fibers with high rare earth concentration and higher mechanical strength than soft glasses. This paper evaluates the suitability of the SAL glass type for radiation dosimetry based on optically stimulated luminescence (OSL) via a comprehensive investigation of the spectroscopic and dosimetric properties of undoped and differently rare earth doped bulk SAL glass samples. Due to the low intensity of the rare earth luminescence peaks in the 250–400 nm OSL detection range, the OSL response for all the SAL glasses is not caused by the rare earth ions but by radiation-induced defects that act as intrinsic centers for the recombination of electrons and holes produced by the ionizing radiation, trapped in fabrication induced defect centers, and then released via stimulation with 470 nm light. The rare earth ions interfere with these processes involving intrinsic centers. This dosimetric behavior of highly rare earth doped SAL glasses suggests that enhancement of OSL response requires lower rare earth concentrations and/or longer wavelength OSL detection range.
- ItemMechanistic insight into the non-hydrolytic sol–gel process of tellurite glass films to attain a high transmission(Cambridge : RSC, 2020) Pan, Xuanzhao; Zhao, Jiangbo; Qian, Gujie; Zhang, Xiaozhou; Ruan, Yinlan; Abell, Andrew; Ebendorff-Heidepriem, HeikeThe development of amorphous films with a wide transmission window and high refractive index is of growing significance due to the strong demand of integrating functional nanoparticles for the next-generation hybrid optoelectronic films. High-index TeO2-based glass films made via the sol-gel process are particularly suitable as their low temperature preparation process promises high compatibility with a large variety of nanoparticles and substrates that suffer from low thermal stability. However, due to the lack of in-depth understanding of the mechanisms of the formation of undesired metallic-Te (highly absorbing species) in the films, the preparation of high-transmission TeO2-based sol-gel films has been severely hampered. Here, by gaining insight into the mechanistic chemistry of metallic-Te formation at different stages during the non-hydrolytic sol-gel process, we identify the chemical route to prevent the generation of metallic-Te in a TeO2-based film. The as-prepared TeO2-based film exhibits a high transmission that is close to the theoretical limit. This opens up a new avenue for advancing the performance of hybrid optoelectronic films via incorporating a large variety of unique nanoparticles. © 2020 The Royal Society of Chemistry.