Filters

20203

More filters

20213
Reset filters

Settings

Author: Einfeldt, Sven × DDC: 530 × WGL Institute: FBH ×

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Temperature-Dependent Charge Carrier Diffusion in [0001¯] Direction of GaN Determined by Luminescence Evaluation of Buried InGaN Quantum Wells
    (Weinheim : Wiley-VCH, 2020) Netzel, Carsten; Hoffmann, Veit; Tomm, Jens W.; Mahler, Felix; Einfeldt, Sven; Weyers, Markus
    Temperature-dependent transport of photoexcited charge carriers through a nominally undoped, c-plane GaN layer toward buried InGaN quantum wells is investigated by continuous-wave and time-resolved photoluminescence spectroscopy. The excitation of the buried InGaN quantum wells is dominated by charge carrier diffusion through the GaN layer; photon recycling contributes only slightly. With temperature decreasing from 310 to 10 K, the diffusion length in [0001⎯⎯] direction increases from 250 to 600 nm in the GaN layer. The diffusion length at 300 K also increases from 100 to 300 nm when increasing the excitation power density from 20 to 500 W cm−2. The diffusion constant decreases from the low-temperature value of ∼7 to 1.5 cm2 s−1 at 310 K. The temperature dependence of the diffusion constant indicates that the diffusivity at room temperature is limited by optical phonon scattering. Consequently, higher diffusion constants in GaN-based devices require a reduced operation temperature. To increase diffusion lengths at a fixed temperature, the effective recombination time has to be prolonged by reducing the number of nonradiative recombination centers.
  • Thumbnail Image
    Item
    Improved Efficiency of Ultraviolet B Light-Emitting Diodes with Optimized p-Side
    (Weinheim : Wiley-VCH, 2020) Kolbe, Tim; Knauer, Arne; Rass, Jens; Cho, Hyun Kyong; Mogilatenko, Anna; Hagedorn, Sylvia; Lobo Ploch, Neysha; Einfeldt, Sven; Weyers, Markus
    The effects of design and thicknesses of different optically transparent p-current spreading layers [short-period superlattice, superlattice (SL), and bulk p- (Formula presented.)] as well as the type and thickness of the p-GaN cap layer on the electrical and optical characteristics of 310 nm ultraviolet light-emitting diodes (LEDs) are investigated. Scanning transmission electron microscopy measurements display self-organized composition variations in the nonpseudomorphically grown SLs, reducing the effect of increased hole injection efficiency of a SL. In addition, the effect leads to an increased operation voltage. In contrast, the bulk p-AlGaN layer has a uniform composition and the corresponding LEDs show only a slightly lower output power along with a lower operating voltage. If the thickness of the p-AlGaN bulk layer in the LED is reduced from 150 nm to 50 nm, the output power increases and the operating voltage decreases. Finally, LEDs with a nonuniform (Formula presented.) -GaN cap layer from a 3D island-like growth mode feature the highest output power and operating voltage. In contrast, the output power and operating voltage of LEDs with a smooth and closed cap depend on the thickness of (Formula presented.) -GaN. The highest output power and lowest operating voltage are achieved for LEDs with the thinnest (Formula presented.) -GaN cap. © 2020 The Authors. Published by Wiley-VCH GmbH
  • Thumbnail Image
    Item
    The 2020 UV emitter roadmap
    (Bristol : IOP Publ., 2020) Amano, Hiroshi; Collazo, Ramón; De Santi, Carlo; Einfeldt, Sven; Funato, Mitsuru; Glaab, Johannes; Hagedorn, Sylvia; Hirano, Akira; Hirayama, Hideki; Ishii, Ryota; Kashima, Yukio; Kawakami, Yoichi; Kirste, Ronny; Kneissl, Michael; Martin, Robert; Mehnke, Frank; Meneghini, Matteo; Ougazzaden, Abdallah; Parbrook, Peter J.; Rajan, Siddharth; Reddy, Pramod; Römer, Friedhard; Friedhard, Jan; Sarkar, Biplab; Scholz, Ferdinand; Schowalter, Leo J; Shields, Philip; Sitar, Zlatko; Sulmoni, Luca; Wang, Tao; Wernicke, Tim; Weyers, Markus; Witzigmann, Bernd; Wu, Yuh-Renn; Wunderer, Thomas; Zhang, Yuewei
    Solid state UV emitters have many advantages over conventional UV sources. The (Al,In,Ga)N material system is best suited to produce LEDs and laser diodes from 400 nm down to 210 nm - due to its large and tuneable direct band gap, n- and p-doping capability up to the largest bandgap material AlN and a growth and fabrication technology compatible with the current visible InGaN-based LED production. However AlGaN based UV-emitters still suffer from numerous challenges compared to their visible counterparts that become most obvious by consideration of their light output power, operation voltage and long term stability. Most of these challenges are related to the large bandgap of the materials. However, the development since the first realization of UV electroluminescence in the 1970s shows that an improvement in understanding and technology allows the performance of UV emitters to be pushed far beyond the current state. One example is the very recent realization of edge emitting laser diodes emitting in the UVC at 271.8 nm and in the UVB spectral range at 298 nm. This roadmap summarizes the current state of the art for the most important aspects of UV emitters, their challenges and provides an outlook for future developments. © 2020 IOP Publishing Ltd.