6 results
Search Results
Now showing 1 - 6 of 6
- ItemSynthesis of High Crystalline TiO2 Nanoparticles on a Polymer Membrane to Degrade Pollutants from Water(Basel : MDPI, 2018-9-5) Fischer, Kristina; Schulz, Paulina; Atanasov, Igor; Abdul Latif, Amira; Thomas, Isabell; Kühnert, Mathias; Prager, Andrea; Griebel, Jan; Schulze, AgnesTitanium dioxide (TiO2) is described as an established material to remove pollutants from water. However, TiO2 is still not applied on a large scale due to issues concerning, for example, the form of use or low photocatalytic activity. We present an easily upscalable method to synthesize high active TiO2 nanoparticles on a polyethersulfone microfiltration membrane to remove pollutants in a continuous way. For this purpose, titanium(IV) isopropoxide was mixed with water and hydrochloric acid and treated up to 210 °C. After cooling, the membrane was simply dip-coated into the TiO2 nanoparticle dispersion. Standard characterization was undertaken (i.e., X-ray powder diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, water permeance, contact angle). Degradation of carbamazepine and methylene blue was executed. By increasing synthesis temperature crystallinity and photocatalytic activity elevates. Both ultrasound modification of nanoparticles and membrane pre-modification with carboxyl groups led to fine distribution of nanoparticles. The ultrasound-treated nanoparticles gave the highest photocatalytic activity in degrading carbamazepine and showed no decrease in degradation after nine times of repetition. The TiO2 nanoparticles were strongly bound to the membrane. Photocatalytic TiO2 nanoparticles with high activity were synthesized. The innovative method enables a fast and easy nanoparticle production, which could enable the use in large-scale water cleaning.
- ItemEffect of morphology on the photoelectrochemical activity of TiO2 self-organized nanotube arrays(Basel : MDPI, 2020) Ennaceri, Houda; Fischer, Kristina; Hanus, Kevin; Chemseddine, Abdelkrim; Prager, Andrea; Griebel, Jan; Kühnert, Mathias; Schulze, Agnes; Abel, BerndIn the present work, highly ordered titanium dioxide (TiO2) nanotube anodes were grown using a rapid anodization process. The photoelectrochemical performances of these electrodes strongly depend on the anodization conditions. Parameters such as electrolyte composition, anodization potential and anodization time are shown to affect the geometrical parameters of TiO2 nanotubes. The optimal anodization parameters are determined by photocurrent measurements, linear sweep voltammetry and electrochemical impedance spectroscopy. The thickness of the tube wall and its homogeneity is shown to strongly depend on the anodization potential, and the formation mechanism is discussed. This study permits the optimization of the photocurrent density and contributes to further improvement of the photoelectrochemical water-splitting performance of TiO2 nanotube photoelectrodes. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemComparison of Photocatalytic Membrane Reactor Types for the Degradation of an Organic Molecule by TiO2-Coated PES Membrane(Basel : MDPI, 2020) Regmi, Chhabilal; Lotfi, Shabnam; Espíndola, Jonathan Cawettiere; Fischer, Kristina; Schulze, Agnes; Schäfer, Andrea IrisPhotocatalytic membrane reactors with different configurations (design, flow modes and light sources) have been widely applied for pollutant removal. A thorough understanding of the contribution of reactor design to performance is required to be able to compare photocatalytic materials. Reactors with different flow designs are implemented for process efficiency comparisons. Several figures-of-merit, namely adapted space-time yield (STY) and photocatalytic space-time yield (PSTY), specific energy consumption (SEC) and degradation rate constants, were used to assess the performance of batch, flow-along and flow-through reactors. A fair comparison of reactor performance, considering throughput together with energy efficiency and photocatalytic activity, was only possible with the modified PSTY. When comparing the three reactors at the example of methylene blue (MB) degradation under LED irradiation, flow-through proved to be the most efficient design. PSTY1/PSTY2 values were approximately 10 times higher than both the batch and flow-along processes. The highest activity of such a reactor is attributed to its unique flow design which allowed the reaction to take place not only on the outer surface of the membrane but also within its pores. The enhancement of the mass transfer when flowing in a narrow space (220 nm in flow-through) contributes to an additional MB removal. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemMembrane Functionalization in Pilot Scale: Roll‐to‐Roll Electron Beam System with Inline Contact Angle Determination(Weinheim : Wiley-VCH, 2021) Schulze, Agnes; Drößler, Lutz; Weiß, Steffen; Went, Marco; Abdul Latif, Amira; Breite, Daniel; Fischer, KristinaTo increase the permeation performance and antifouling properties of polymer membranes, a one-step reaction using electron irradiation was developed. This process combines the surface activation of the membrane polymer and the simultaneous permanent immobilization of hydrophilic molecules. This technology can be applied to various polymers, flat sheet/hollow fiber membranes and all pore ranges. The roll-to-roll system developed for this enables all process steps including inline analysis for quality control of the membrane surface in a continuously operated system. © 2021 The Authors. Chemie Ingenieur Technik published by Wiley-VCH GmbH
- ItemEnhanced removal and toxicity decline of diclofenac by combining UVA treatment and adsorption of photoproducts to polyvinylidene difluoride(Basel : MDPI, 2020) Fischer, Kristina; Sydow, Stephan; Griebel, Jan; Naumov, Sergej; Elsner, Christian; Thomas, Isabell; Latif, Amira Abdul; Schulze, AgnesThe occurrence of micropollutants in the environment is an emerging issue. Diclofenac, a non-steroidal anti-inflammatory drug, is one of the most frequently detected pharmaceuticals in the environment worldwide. Diclofenac is transformed by UVA light into different products with higher toxicity. The absorbance of the transformation products overlaps with the absorbance of diclofenac itself and inhibits the ongoing photoreaction. By adding polyvinylidene difluoride (PVDF), the products adsorb to the surface of PVDF. Therefore, phototransformation of diclofenac and total organic carbon (TOC) removal is enhanced and the toxicity decreased. At 15 min and 18 h of UVA treatment, removal of diclofenac and TOC increases from 56% to 65% and 18% to 54%, respectively, when PVDF is present. The toxicity of a UVA treated (18 h) diclofenac solution doubles (from 5 to 10, expressed in toxicity units, TU), while no toxicity was detectable when PVDF is present during UVA treatment (TU = 0). PVDF does not need to be irradiated itself but must be present during photoreaction. The adsorbent can be reused by washing with water or ethanol. Diclofenac (25 mg L−1) UVA light irradiation was monitored with high performance liquid chromatography (HPLC), UV-Vis spectroscopy and by analysing the decrease of TOC. The toxicity towards Vibrio fischeri was examined according to DIN EN ISO 11348-1: 2009-05. Density functional theory (DFT) was used to simulate the phototransformation products known in literature as well as further products identified via gas chromatography–mass spectrometry (GC-MS). The absorption spectra, reaction enthalpies (ΔH) and Gibbs free energy of reactions (ΔG) were calculated. The combination of UVA irradiation of diclofenac with adsorption of photoproducts to PVDF is unique and opens up new possibilities to enhance removal of pollutants from water.
- ItemBio-Inspired Polymer Membrane Surface Cleaning(Basel : MDPI, 2017-3-9) Schulze, Agnes; Breite, Daniel; Kim, Yongkyum; Schmidt, Martin; Thomas, Isabell; Went, Marco; Fischer, Kristina; Prager, AndreaTo generate polyethersulfone membranes with a biocatalytically active surface, pancreatin was covalently immobilized. Pancreatin is a mixture of digestive enzymes such as protease, lipase, and amylase. The resulting membranes exhibit self-cleaning properties after “switching on” the respective enzyme by adjusting pH and temperature. Thus, the membrane surface can actively degrade a fouling layer on its surface and regain initial permeability. Fouling tests with solutions of protein, oil, and mixtures of both, were performed, and the membrane’s ability to self-clean the fouled surface was characterized. Membrane characterization was conducted by investigation of the immobilized enzyme concentration, enzyme activity, water permeation flux, fouling tests, porosimetry, X-ray photoelectron spectroscopy, and scanning electron microscopy.