5 results
Search Results
Now showing 1 - 5 of 5
- ItemPredicting the dominating factors during heat transfer in magnetocaloric composite wires(Amsterdam : Elsevier B.V., 2020) Krautz, M.; Beyer, L.; Funk, A.; Waske, A.; Weise, B.; Freudenberger, J.; Gottschall, T.Magnetocaloric composite wires have been studied by pulsed-field measurements up to μ0ΔH = 10 T with a typical rise time of 13 ms in order to evaluate the evolution of the adiabatic temperature change of the core, ΔTad, and to determine the effective temperature change at the surrounding steel jacket, ΔTeff, during the field pulse. An inverse thermal hysteresis is observed for ΔTad due to the delayed thermal transfer. By numerical simulations of application-relevant sinusoidal magnetic field profiles, it can be stated that for field-frequencies of up to two field cycles per second heat can be efficiently transferred from the core to the outside of the jacket. In addition, intense numerical simulations of the temperature change of the core and jacket were performed by varying different parameters, such as frequency, heat capacity, thermal conductivity and interface resistance in order to shed light on their impact on ΔTeff at the outside of the jacket in comparison to ΔTad provided by the core.
- ItemEvaluation of the effective temperature change in Gd-based composite wires assessed by static and pulsed-field magnetic measurements(Amsterdam : North-Holland Publ. Co., 2021) Beyer, L.; Weise, B.; Freudenberger, J.; Hufenbach, J.K.; Gottschall, T.; Krautz, M.Gd cladded in a seamless 316L austenitic steel tube has been swaged into wires by the powder-in-tube (PIT) technology, resulting in an outer diameter of 1 mm, a wall thickness of approx. 100 µm and a filling factor of around 62 vol%. Such wires provide an advantageous geometry for heat exchangers and have the benefit to protect the Gadolinium, i.e. from corrosion when being in contact with a heat transfer fluid. The magnetocaloric composite has been studied by static and pulsed magnetic-field measurements in order to evaluate the performance of Gd as a core material. By the analysis of magnetization and heat capacity data, the influences of deformation-induced defects on Gadolinium are presented. The subsequent heat treatment at 773 K for 1 h in Ar atmosphere allowed restoring the magnetic properties of the wire after deformation. Data of the pulsed magnetic-field measurements on the Gd-filled PIT-wires and a Gd–core separated from the jacket are presented, with an achievable temperature change of 1.2 K for the wire and 5.2 K for the Gd in 2 T, respectively. A comparison to previously studied La(Fe, Co, Si)13-filled composite wires is included. It indicates that performance losses due to the passive matrix material cannot be overcome only by an increased adiabatic temperature change of the core material, but instead the wire components need to be chosen regarding an optimized heat capacity ratio, as well.
- ItemOrbital and spin effects for the upper critical field in As-deficient disordered Fe pnictide superconductors(Milton Park : Taylor & Francis, 2009) Fuchs, G.; Drechsler, S.-L.; Kozlova, N.; Bartkowiak, M.; Hamann-Borrero, J.E.; Behr, G.; Nenkov, K.; Klauss, H.-H.; Maeter, H.; Amato, A.; Luetkens, H.; Kwadrin, A.; Khasanov, R.; Freudenberger, J.; Köhler, A.; Knupfer, M.; Arushanov, E.; Rosner, H.; Büchner, B.; Schultz, L.We report upper critical field Bc2(T) data for LaO0.9F0.1FeAs1- δ in a wide temperature and field range up to 60 T. The large slope of Bc2≈- 5.4 to -6.6 T K-1 near an improved Tc≈28.5 K of the in-plane Bc2(T) contrasts with a flattening starting near 23 K above 30 T we regard as the onset of Pauli-limited behaviour (PLB) with Bc2(0)≈63–68 T. We interpret a similar hitherto unexplained flattening of the Bc2(T) curves reported for at least three other disordered closely related systems, Co-doped BaFe2As2, (Ba,K) Fe2As2 and NdO0.7F0.3FeAs (all single crystals), for applied fields H∥(a,b), also as a manifestation of PLB. Their Maki parameters have been estimated by analysing their Bc2(T) data within the Werthamer–Helfand–Hohenberg approach. The pronounced PLB of (Ba, K)Fe2As2 single crystals obtained from an Sn flux is attributed also to a significant As deficiency detected by wavelength dispersive x-ray spectroscopy as reported by Ni et al (2008 Phys. Rev. B 78 014507). Consequences of our results are discussed in terms of disorder effects within conventional superconductivity (CSC) and unconventional superconductivity (USC). USC scenarios with nodes on individual Fermi surface sheets (FSS), e.g. p- and d-wave SC, can be discarded for our samples. The increase of dBc2/dT|Tc by sizeable disorder provides evidence for an important intraband (intra-FSS) contribution to the orbital upper critical field. We suggest that it can be ascribed either to an impurity-driven transition from s± USC to CSC of an extended s++-wave state or to a stabilized s±-state provided As-vacancies cause predominantly strong intraband scattering in the unitary limit. We compare our results with Bc2 data from the literature, which often show no PLB for fields below 60–70 T probed so far. A novel disorder-related scenario of a complex interplay of SC with two different competing magnetic instabilities is suggested.
- ItemTuning functional properties by plastic deformation(Milton Park : Taylor & Francis, 2009) Kwon, A.R.; Neu, V.; Matias, V.; Hänisch, J.; Hühne, R.; Freudenberger, J.; Holzapfel, B.; Schultz, L.; Fähler, S.It is well known that a variation of lattice constants can strongly influence the functional properties of materials. Lattice constants can be influenced by external forces; however, most experiments are limited to hydrostatic pressure or biaxial stress. Here, we present an experimental approach that imposes a large uniaxial strain on epitaxially grown films in order to tune their functional properties. A substrate made of a ductile metal alloy covered with a biaxially oriented MgO layer is used as a template for growth of epitaxial films. By applying an external plastic strain, we break the symmetry within the substrate plane compared to the as-deposited state. The consequences of 2% plastic strain are examined for an epitaxial hard magnetic Nd2Fe14B film and are found to result in an elliptical distortion of the in-plane anisotropy below the spin-reorientation temperature. Our approach is a versatile method to study the influence of large plastic strain on various materials, as the MgO(001) layer used is a common substrate for epitaxial growth.
- ItemThe Influence of Cu-Additions on the Microstructure, Mechanical and Magnetic Properties of MnAl-C Alloys(London : Nature Publishing Group, 2020) Jürries, F.; Freudenberger, J.; Nielsch, K.; Woodcock, T.G.Alloys of the form (Mn54Al44C2)100-xCux (with x = 0, 1, 2, 4 and 6) were produced by induction melting. After homogenisation and quenching, most of the alloys consist entirely of the retained ε-phase, except for x = 6, in which the κ-phase was additionally present. After subsequent annealing, the alloys with x ≤ 2 consist entirely of a Cu-doped, ferromagnetic τ-phase, whereas the alloys with x > 2 additionally contain the κ-phase. The polarisation of the alloys at an applied field of 14 T decreases with increasing Cu-content, which is attributed i) to the dilution of the magnetic moment of the τ-phase unit cell by the Cu atoms, which do not carry a magnetic moment, and ii) at higher Cu-contents, to the formation of the κ-phase, which has a much lower polarisation than the τ-phase and therefore dilutes the net polarisation of the alloys. The Curie temperature was not affected by the Cu-additions. The stress needed to die-upset the alloys with x ≤ 2 was similar to that of the undoped alloy, whereas it was much lower for x = 4 and 6, due to the presence of intergranular layers of the κ-phase. The extrinsic magnetic properties of alloys with x ≤ 2 were improved by die-upsetting, whereas decomposition of the τ-phase during processing had a deleterious effect on the magnetic properties for higher Cu-additions.