Search Results

Now showing 1 - 7 of 7
Loading...
Thumbnail Image
Item

Continuous tuning of two-section, single-mode terahertz quantum-cascade lasers by fiber-coupled, near-infrared illumination

2017, Hempel, Martin, Röben, Benjamin, Niehle, Michael, Schrottke, Lutz, Trampert, Achim, Grahn, Holger T.

The dynamical tuning due to rear facet illumination of single-mode, terahertz (THz) quantum-cascade lasers (QCLs) which employ distributed feedback gratings are compared to the tuning of single-mode QCLs based on two-section cavities. The THz QCLs under investigation emit in the range of 3 to 4.7 THz. The tuning is achieved by illuminating the rear facet of the QCL with a fiber-coupled light source emitting at 777 nm. Tuning ranges of 5.0 and 11.9 GHz under continuous-wave and pulsed operation, respectively, are demonstrated for a single-mode, two-section cavity QCL emitting at about 3.1 THz, which exhibits a side-mode suppression ratio better than -25 dB.

Loading...
Thumbnail Image
Item

High-spectral-resolution terahertz imaging with a quantum-cascade laser

2016, Hagelschuer, Till, Rothbart, Nick, Richter, Heiko, Wienold, Martin, Schrottke, Lutz, Grahn, Holger T., Hübers, Heinz-Wilhelm

We report on a high-spectral-resolution terahertz imaging system operating with a multi-mode quantum-cascade laser (QCL), a fast scanning mirror, and a sensitive Ge:Ga detector. By tuning the frequency of the QCL, several spectra can be recorded in 1.5 s during the scan through a gas cell filled with methanol (CH3OH). These experiments yield information about the local absorption and the linewidth. Measurements with a faster frame rate of up to 3 Hz allow for the dynamic observation of CH3OH gas leaking from a terahertz-transparent tube into the evacuated cell. In addition to the relative absorption, the local pressure is mapped by exploiting the effect of pressure broadening.

Loading...
Thumbnail Image
Item

Electrical and optical properties of epitaxial binary and ternary GeTe-Sb2Te3 alloys

2018, Boschker, Jos E., Lü, Xiang, Bragaglia, Valeria, Wang,Ruining, Grahn, Holger T., Calarco, Raffaella

Phase change materials such as pseudobinary GeTe-Sb2Te3 (GST) alloys are an essential part of existing and emerging technologies. Here, we investigate the electrical and optical properties of epitaxial phase change materials: α-GeTe, Ge2Sb2Te5 (GST225), and Sb2Te3. Temperature-dependent Hall measurements reveal a reduction of the hole concentration with increasing temperature in Sb2Te3 that is attributed to lattice expansion, resulting in a non-linear increase of the resistivity that is also observed in GST225. Fourier transform infrared spectroscopy at room temperature demonstrates the presence of electronic states within the energy gap for α-GeTe and GST225. We conclude that these electronic states are due to vacancy clusters inside these two materials. The obtained results shed new light on the fundamental properties of phase change materials such as the high dielectric constant and persistent photoconductivity and have the potential to be included in device simulations.

Loading...
Thumbnail Image
Item

Effective group dispersion of terahertz quantum-cascade lasers

2020, Röben, Benjamin, Lü, Xiang, Biermann, Klaus, Schrottke, Lutz, Grahn, Holger T.

Terahertz (THz) quantum-cascade lasers (QCLs) are based on complex semiconductor heterostructures, in which the optical gain is generated by intersubband transitions. Using the spacing of the laser modes in the emission spectra, we have determined the effective group refractive index for more than one hundred THz QCLs of the hybrid design with Fabry-Pérot resonators based on single-plasmon waveguides. The experimentally obtained values of for emission frequencies between 2.5 and 5.6 THz generally follow the trend of derived from electromagnetic simulations. However, for a certain number of QCLs, the experimental values of exhibit a rather large deviation from the general trend and the simulation results. From a thorough analysis, we conclude that differences in the optical gain/loss spectra are responsible for this deviation, which lead to a modification of the dispersion in the active region and consequently to altered values of. The analysis also provides evidence that these differences in the gain/loss spectra originate from both, the details of the design and the gain broadening due to interface roughness. © 2020 The Author(s). Published by IOP Publishing Ltd.

Loading...
Thumbnail Image
Item

Real-time gas sensing based on optical feedback in a terahertz quantum-cascade laser

2017, Hagelschuer, Till, Wienold, Martin, Richter, Heiko, Schrottke, Lutz, Grahn, Holger T., Hübers, Heinz-Wilhelm

We report on real-time gas sensing with a terahertz quantum-cascade laser (QCL). The method is solely based on the modulation of the external cavity length, exploiting the intermediate optical feedback regime. While the QCL is operated in continuous-wave mode, optical feedback results in a change of the QCL frequency as well as its terminal voltage. The first effect is exploited to tune the lasing frequency across a molecular absorption line. The second effect is used for the detection of the self-mixing signal. This allows for fast measurement times on the order of 10 ms per spectrum and for real-time measurements of gas concentrations with a rate of 100 Hz. This technique is demonstrated with a mixture of D2O and CH3OD in an absorption cell.

Loading...
Thumbnail Image
Item

High-Performance GaAs/AlAs Terahertz Quantum-Cascade Lasers for Spectroscopic Applications

2020, Schrottke, Lutz, Lü, Xiang, Röben, Benjamin, Biermann, Klaus, Hagelschuer, Till, Wienold, Martin, Hübers, Heinz-Wilhelm, Hannemann, Mario, van Helden, Jean-Pierre H., Röpcke, Jürgen, Grahn, Holger T.

We have developed terahertz (THz) quantum-cascade lasers (QCLs) based on GaAs/AlAs heterostructures for application-defined emission frequencies between 3.4 and 5.0 THz. Due to their narrow line width and rather large intrinsic tuning range, these THz QCLs can be used as local oscillators in airborne or satellite-based astronomical instruments or as radiation sources for high-resolution absorption spectroscopy, which is expected to allow for a quantitative determination of the density of atoms and ions in plasma processes. The GaAs/AlAs THz QCLs can be operated in mechanical cryocoolers and even in miniature cryocoolers due to the comparatively high wall-plug efficiency of around 0.2% and typical current densities below 500 A/cm$^2$. These lasers emit output powers of more than 1 mW at operating temperatures up to about 70 K, which is sufficient for most of the abovementioned applications. © 2011-2012 IEEE.

Loading...
Thumbnail Image
Item

Terahertz quantum-cascade lasers as high-power and wideband, gapless sources for spectroscopy

2017, Röben, Benjamin, Lü, Xiang, Hempel, Martin, Biermann, Klaus, Schrottke, Lutz, Grahn, Holger T.

Terahertz (THz) quantum-cascade lasers (QCLs) are powerful radiation sources for high-resolution and high-sensitivity spectroscopy with a discrete spectrum between 2 and 5 THz as well as a continuous coverage of several GHz. However, for many applications, a radiation source with a continuous coverage of a substantially larger frequency range is required. We employed a multi-mode THz QCL operated with a fast ramped injection current, which leads to a collective tuning of equally-spaced Fabry-Pérot laser modes exceeding their separation. A continuous coverage over 72 GHz at about 4.7 THz was achieved. We demonstrate that the QCL is superior to conventional sources used in Fourier transform infrared spectroscopy in terms of the signal-to-noise ratio as well as the dynamic range by one to two orders of magnitude. Our results pave the way for versatile THz spectroscopic systems with unprecedented resolution and sensitivity across a wide frequency range.