2016, Chabak, Kelson D., Moser, Neil, Green, Andrew J., Walker, Dennis E., Tetlak, Stephen E., Heller, Eric, Crespo, Antonio, Fitch, Robert, McCandless, Jonathan P., Leedy, Kevin, Baldini, Michele, Wagner, Gunter, Galazka, Zbigniew, Li, Xiuling, Jessen, Gregg

Sn-doped gallium oxide (Ga2O3) wrap-gate fin-array field-effect transistors (finFETs) were formed by top-down BCl3 plasma etching on a native semi-insulating Mg-doped (100) β-Ga2O3 substrate. The fin channels have a triangular cross-section and are approximately 300 nm wide and 200 nm tall. FinFETs, with 20 nm Al2O3 gate dielectric and ∼2 μm wrap-gate, demonstrate normally-off operation with a threshold voltage between 0 and +1 V during high-voltage operation. The ION/IOFF ratio is greater than 105 and is mainly limited by high on-resistance that can be significantly improved. At VG = 0, a finFET with 21 μm gate-drain spacing achieved a three-terminal breakdown voltage exceeding 600 V without a field-plate.

2019, Liddy, Kyle J., Green, Andrew J., Hendricks, Nolan S., Heller, Eric R., Moser, Neil A., Leedy, Kevin D., Popp, Andreas, Lindquist, Miles T., Tetlak, Stephen E., Wagner, Günter

We report the first demonstration of self-aligned gate (SAG) β-Ga2O3 metal-oxide-semiconductor field-effect transistors (MOSFETs) as a path toward eliminating source access resistance for low-loss power applications. The SAG process is implemented with a subtractively defined and etched refractory metal, such as Tungsten, combined with ion-implantation. We report experimental and modeled DC performance of a representative SAG device that achieved a maximum transconductance of 35 mS mm-1 and an on-resistance of ∼30 Ω mm with a 2.5 μm gate length. These results highlight the advantage of implant technology for SAG β-Ga2O3 MOSFETs enabling future power switching and RF devices with low parasitic resistance. © Not subject to copyright in the USA. Contribution of Wright-Patterson AFB.