Search Results
Observation of direction instability in a fiber ring laser
We report on the observation of a new phenomenon occurring in a fiber ring laser. This phenomenon is about the transition from an initially bidirectional emission of a reciprocal fiber ring laser to a unidirectional emission at a certain pump power threshold. In addition, the final direction is not predefined but appears to be randomly chosen every time the threshold is exceeded. Therefore, we term this new phenomenon direction instability. Furthermore, we provide a first discussion of how the instability threshold is influenced by the length and the loss of the cavity. We show that the threshold follows a power times length scaling, indicating a nonlinear origin.
Supercontinuum generation in a carbon disulfide core microstructured optical fiber
We demonstrate supercontinuum generation in a liquid-core microstructured optical fiber using carbon disulfide as the core material. The fiber provides a specific dispersion landscape with a zero-dispersion wavelength approaching the telecommunication domain where the corresponding capillary-type counterpart shows unsuitable dispersion properties for soliton fission. The experiments were conducted using two pump lasers with different pulse duration (30 fs and 90 fs) giving rise to different non-instantaneous contributions of carbon disulfide in each case. The presented results demonstrate an extraordinary high conversion efficiency from pump to soliton and to dispersive wave, overall defining a platform that enables studying the impact of non-instantaneous responses on ultrafast soliton dynamics and coherence using straightforward pump lasers and diagnostics.
A stimulated Stokes Raman scattering-based approach for continuous wave supercontinuum generation in optical fibers
We report on a new and simple approach for continuous wave supercontinuum generation in optical fibers. Our new approach uses the effect of stimulated Stokes Raman scattering in a low loss fiber ring laser. By continuously pumping this ring laser with up to 19 W optical power we excited up to six Stokes orders and covered a wavelength range of 500 nm. Due to the feedback mechanism of the ring layout additional nonlinear effects occurred next to the plain generation of individual Stokes peaks. Eventually, these effects broaden and merge the separated Stokes peaks and create a single, connected continuous supercontinuum. By using the effect of stimulated Stokes Raman scattering, we do not rely on anomalous dispersion and modulation instability as typically required for continuous wave supercontinuum generation. © 2019 Astro Ltd.
Multi-watt, multi-octave, mid-infrared femtosecond source
Spectroscopy in the wavelength range from 2 to 11 μm (900 to 5000 cm−1) implies a multitude of applications in fundamental physics, chemistry, as well as environmental and life sciences. The related vibrational transitions, which all infrared-active small molecules, the most common functional groups, as well as biomolecules like proteins, lipids, nucleic acids, and carbohydrates exhibit, reveal information about molecular structure and composition. However, light sources and detectors in the mid-infrared have been inferior to those in the visible or near-infrared, in terms of power, bandwidth, and sensitivity, severely limiting the performance of infrared experimental techniques. This article demonstrates the generation of femtosecond radiation with up to 5 W at 4.1 μm and 1.3 W at 8.5 μm, corresponding to an order-of-magnitude average power increase for ultrafast light sources operating at wavelengths longer than 5 μm. The presented concept is based on power-scalable near-infrared lasers emitting at a wavelength near 1 μm, which pump optical parametric amplifiers. In addition, both wavelength tunability and supercontinuum generation are reported, resulting in spectral coverage from 1.6 to 10.2 μm with power densities exceeding state-of-the-art synchrotron sources over the entire range. The flexible frequency conversion scheme is highly attractive for both up-conversion and frequency comb spectroscopy, as well as for a variety of time-domain applications.Spectroscopy in the wavelength range from 2 to 11 μm (900 to 5000 cm−1) implies a multitude of applications in fundamental physics, chemistry, as well as environmental and life sciences. The related vibrational transitions, which all infrared-active small molecules, the most common functional groups, as well as biomolecules like proteins, lipids, nucleic acids, and carbohydrates exhibit, reveal information about molecular structure and composition. However, light sources and detectors in the mid-infrared have been inferior to those in the visible or near-infrared, in terms of power, bandwidth, and sensitivity, severely limiting the performance of infrared experimental techniques. This article demonstrates the generation of femtosecond radiation with up to 5 W at 4.1 μm and 1.3 W at 8.5 μm, corresponding to an order-of-magnitude average power increase for ultrafast light sources operating at wavelengths longer than 5 μm. The presented concept is based on power-scalable near-infrared lasers emitting at a wavelength near 1 μm, which pump optical parametric amplifiers. In addition, both wavelength tunability and supercontinuum generation are reported, resulting in spectral coverage from 1.6 to 10.2 μm with power densities exceeding state-of-the-art synchrotron sources over the entire range. The flexible frequency conversion scheme is highly attractive for both up-conversion and frequency comb spectroscopy, as well as for a variety of time-domain applications.
Intra-cavity measurement concept of dispersion properties with a tunable fiber-integrated laser
The dispersion properties of fibers depict a key characteristic to model the propagation of ultra-short pulses in waveguides. In the following, a new method is presented to directly measure the dispersion properties of fibers and optical components in the time domain. The analysis is based on pulse shape variations along the tuning range of a theta cavity fiber laser (TCFL) depending on the adjusted repetition rate. The automated measurement procedure, evaluating pulse symmetry, achieves a temporal sensitivity below 5 ps surpassing the resolution of the acquisition electronics. Exemplarily, two samples of Nufern PM980-XP fiber are investigated with an Yb-doped tunable TCFL retrieving the mean dispersion parameter D? by comparative measurements. The obtained results are compared to a reference method based on spectral interferometry. With deviations in D? between either approach of 0.3% and 1.3%, respectively, the results agree well within the measurement errors of the TCFL, verifying the presented concept. Due to the pulse formation process extending over multiple round trips, this approach achieves an enhanced sensitivity compared to competing direct temporal methods. Together with an alignment free operation, the fiber-integrated TCFL depicts a simple and robust concept showing potential in specific measurement scenarios such as in quality management. © 2019 Astro Ltd.