2023, Zhang, Zongbao, Ji, Ran, Hofstetter, Yvonne J., Deconinck, Marielle, Brunner, Julius, Li, Yanxiu, An, Qingzhi, Vaynzof, Yana

Inorganic cesium lead iodide (CsPbI3) perovskite solar cells (PSCs) have attracted enormous attention due to their excellent thermal stability and optical bandgap (∼1.73 eV), well-suited for tandem device applications. However, achieving high-performance photovoltaic devices processed at low temperatures is still challenging. Here we reported a new method for the fabrication of high-efficiency and stable γ-CsPbI3 PSCs at lower temperatures than was previously possible by introducing the long-chain organic cation salt ethane-1,2-diammonium iodide (EDAI2) and regulating the content of lead acetate (Pb(OAc)2) in the perovskite precursor solution. We find that EDAI2 acts as an intermediate that can promote the formation of γ-CsPbI3, while excess Pb(OAc)2 can further stabilize the γ-phase of CsPbI3 perovskite. Consequently, improved crystallinity and morphology and reduced carrier recombination are observed in the CsPbI3 films fabricated by the new method. By optimizing the hole transport layer of CsPbI3 inverted architecture solar cells, we demonstrate efficiencies of up to 16.6%, surpassing previous reports examining γ-CsPbI3 in inverted PSCs. Notably, the encapsulated solar cells maintain 97% of their initial efficiency at room temperature and under dim light for 25 days, demonstrating the synergistic effect of EDAI2 and Pb(OAc)2 in stabilizing γ-CsPbI3 PSCs.

2023, Goetz, Katelyn P., Thome, Fabian T. F., An, Qingzhi, Hofstetter, Yvonne J., Schramm, Tim, Yangui, Aymen, Kiligaridis, Alexander, Loeffler, Markus, Taylor, Alexander D., Scheblykin, Ivan G., Vaynzof, Yana

Exposure to environmental factors is generally expected to cause degradation in perovskite films and solar cells. Herein, we show that films with certain defect profiles can display the opposite effect, healing upon exposure to oxygen under illumination. We tune the iodine content of methylammonium lead triiodide perovskite from understoichiometric to overstoichiometric and expose them to oxygen and light prior to the addition of the top layers of the device, thereby examining the defect dependence of their photooxidative response in the absence of storage-related chemical processes. The contrast between the photovoltaic properties of the cells with different defects is stark. Understoichiometric samples indeed degrade, demonstrating performance at 33% of their untreated counterparts, while stoichiometric samples maintain their performance levels. Surprisingly, overstoichiometric samples, which show low current density and strong reverse hysteresis when untreated, heal to maximum performance levels (the same as untreated, stoichiometric samples) upon the photooxidative treatment. A similar, albeit smaller-scale, effect is observed for triple cation and methylammonium-free compositions, demonstrating the general application of this treatment to state-of-the-art compositions. We examine the reasons behind this response by a suite of characterization techniques, finding that the performance changes coincide with microstructural decay at the crystal surface, reorientation of the bulk crystal structure for the understoichiometric cells, and a decrease in the iodine-to-lead ratio of all films. These results indicate that defect engineering is a powerful tool to manipulate the stability of perovskite solar cells.

2022, Sullivan, Ryan P., Morningstar, John T., Castellanos-Trejo, Eduardo, Bradford, Robert W., Hofstetter, Yvonne J., Vaynzof, Yana, Welker, Mark E., Jurchescu, Oana D.

Molecular-scale diodes made from self-assembled monolayers (SAMs) could complement silicon-based technologies with smaller, cheaper, and more versatile devices. However, advancement of this emerging technology is limited by insufficient electronic performance exhibited by the molecular current rectifiers. We overcome this barrier by exploiting the charge-transfer state that results from co-assembling SAMs of molecules with strong electron donor and acceptor termini. We obtain a substantial enhancement in current rectification, which correlates with the degree of charge transfer, as confirmed by several complementary techniques. These findings provide a previously enexplored method for manipulating the properties of molecular electronic devices by exploiting donor/acceptor interactions. They also serve as a model test platform for the study of doping mechanisms in organic systems. Our devices have the potential for fast widespread adoption due to their low-cost processing and self-assembly onto silicon substrates, which could allow seamless integration with current technologies.

2023, Lapalikar, Vaidehi, Dacha, Preetam, Hambsch, Mike, Hofstetter, Yvonne J., Vaynzof, Yana, Mannsfeld, Stefan C. B., Ruck, Michael

Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its incorporation in these devices in a convenient, scalable, and economical way, BiOI thin films were investigated as part of heterojunctions with various p-type organic semiconductors (OSCs) and tested in a field-effect transistor (FET) configuration. The hybrid heterojunctions, which combine the respective functionalities of BiOI and the OSCs were processed from solution under ambient atmosphere. The characteristics of each of these hybrid systems were correlated with the physical and chemical properties of the respective materials using a concept based on heteropolar chemical interactions at the interface. Systems suitable for application in lateral transport devices were identified and it was demonstrated how materials in the hybrids interact to provide improved and synergistic properties. These indentified heterojunction FETs are a first instance of successful incorporation of solution-processed BiOI thin films in a three-terminal device. They show a significant threshold voltage shift and retained carrier mobility compared to pristine OSC devices and open up possibilities for future optoelectronic applications.

2022, Albaladejo‐Siguan, Miguel, Becker‐Koch, David, Baird, Elizabeth C., Hofstetter, Yvonne J., Carwithen, Ben P., Kirch, Anton, Reineke, Sebastian, Bakulin, Artem A., Paulus, Fabian, Vaynzof, Yana

Light-harvesting devices made from lead sulfide quantum dot (QD) absorbers are one of the many promising technologies of third-generation photovoltaics. Their simple, solution-based fabrication, together with a highly tunable and broad light absorption makes their application in newly developed solar cells, particularly promising. In order to yield devices with reduced voltage and current losses, PbS QDs need to have strategically passivated surfaces, most commonly achieved through lead iodide and bromide passivation. The interdot spacing is then predominantly filled with residual amorphous lead halide species that remain from the ligand exchange, thus hindering efficient charge transport and reducing device stability. Herein, it is demonstrated that a post-treatment by iodide-based 2-phenylethlyammonium salts and intermediate 2D perovskite formation can be used to manage the lead halide excess in the PbS QD active layer. This treatment results in improved device performance and increased shelf-life stability, demonstrating the importance of interdot spacing management in PbS QD photovoltaics.

2022, Ji, Ran, Zhang, Zongbao, Hofstetter, Yvonne J., Buschbeck, Robin, Hänisch, Christian, Paulus, Fabian, Vaynzof, Yana

Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different materials (for example, donor/acceptor) or doping (for example, p–n junction) or even varying their dimensionality (for example, 3D/2D). Here we demonstrate the concept of phase heterojunction (PHJ) solar cells by utilizing two polymorphs of the same material. We demonstrate the approach by forming γ-CsPbI3/β-CsPbI3 perovskite PHJ solar cells. We find that all of the photovoltaic parameters of the PHJ device significantly surpass those of each of the single-phase devices, resulting in a maximum power conversion efficiency of 20.1%. These improvements originate from the efficient passivation of the β-CsPbI3 by the larger bandgap γ-CsPbI3, the increase in the built-in potential of the PHJ devices enabled by the energetic alignment between the two phases and the enhanced absorption of light by the PHJ structure. The approach demonstrated here offers new possibilities for the development of photovoltaic devices based on polymorphic materials.

2023, Albaladejo‐Siguan, Miguel, Prudnikau, Anatol, Senina, Alina, Baird, Elizabeth C., Hofstetter, Yvonne J., Brunner, Julius, Shi, Juanzi, Vaynzof, Yana, Paulus, Fabian

The synthesis of metal sulfide nanocrystals is a crucial step in the fabrication of quantum dot (QD) photovoltaics. Control over the QD size during synthesis allows for precise tuning of their optical and electronic properties, making them an appealing choice for electronic applications. This flexibility has led to the implementation of QDs in both highly-efficient single junction solar cells and other optoelectronic devices including photodetectors and transistors. Most commonly, metal sulfide QDs are synthesized using the hot-injection method utilizing a toxic, and air- and moisture-sensitive sulfur source: bis(trimethylsilyl) sulfide ((TMS)2S). Here, bis(stearoyl) sulfide (St2S) is presented as a new type of air-stable sulfur precursor for the synthesis of sulfide-based QDs, which yields uniform, pure, and stable nanocrystals. Photovoltaic devices based on these QDs are equally efficient as those fabricated by (TMS)2S but exhibit enhanced operational stability. These results highlight that St2S can be widely adopted for the synthesis of metal sulfide QDs for a range of optoelectronic applications.