Search Results
Wetting behaviour and reactivity between liquid Gd and ZrO2 substrate
2017, Turalska, P., Homa, M., Bruzda, G., Sobczak, N., Kaban, I., Mattern, N., Eckert, J.
The wetting behavior and reactivity between molten pure Gd and polycrystalline 3YSZ substrate (ZrO2 stabilized with 3 wt% of Y2O3)were experimentally determined by a sessile drop method using a classical contact heating coupled with drop pushing procedure. The test was performed under an inert flowing gas atmosphere (Ar) at two temperatures of 1362°C and 1412°C. Immediately after melting (Tm=1341°C), liquid Gd did not wet the substrate forming a contact angle of θ=141°. The non-wetting to wetting transition (θ < 90°) took place after about 110 seconds of interaction and was accompanied by a sudden decrease in the contact angle value to 67°. Further heating of the couple to 1412 °C did not affect wetting (θ=67°±1°). The solidified Gd/3YSZ couple was studied by means of optical microscopy and scanning electron microscopy coupled with X-ray energy dispersive spectroscopy. Structural investigations revealed that the wettability in the Gd/3YSZ system is of a reactive nature associated with the formation of a continuous layer of a wettable reaction product Gd2Zr2O7.
Wettability and reactivity of ZrB2 substrates with liquid Al
2016, Nowak, R., Sobczak, N., Bruzda, G., Wojewoda-Budka, J., Litynska-Dobrzynska, L., Homa, M., Kaban, I., Xi, L., Jaworska, L.
Wetting characteristics of the Al/ZrB2 system were experimentally determined by the sessile drop method with application of separate heating of the ZrB2 and Al samples and combined with in situ cleaning of Al drop from native oxide film directly in vacuum chamber. The tests were performed in ultrahigh vacuum of 10−6 mbar at temperatures 710, 800, and 900 °C as well as in flowing inert gas (Ar) atmosphere at 1400 °C. The results evidenced that liquid Al does not wet ZrB2 substrate at 710 and 800 °C, forming high contact angles (θ) of 128° and 120°, respectively. At 900 °C, wetting phenomenon (θ < 90°) occurs in 29th minute and the contact angle decreases monotonically to the final value of 80°. At 1400 °C, wetting takes place immediately after drop deposition with a fast decrease in the contact angle to 76°. The solidified Al/ZrB2 couples were studied by scanning and transmission electron microscopy coupled with x-ray energy diffraction spectroscopy. Structural characterization revealed that only in the Al/ZrB2 couple produced at the highest temperature of 1400 °C new phases (Al3Zr, AlB2 and α-Al2O3) were formed.
The effect of testing procedure on DSC measurements of Gd-Ti-Zr alloy using ZrO2 container
2020, Turalska, P., Homa, M., Sobczak, N., Gazda, A., Wierzbicka-Miernik, A., Kaban, I.
Differential Scanning Calorimetry (DSC) was applied to determine the critical temperatures of phase transformations in the Gd40Ti30Zr30 alloy (wt%). The comparative measurements were carried out using three types of measuring devices at a temperature RT- 1650°C in the same flowing gas (Ar, 99.9992%) but applying different testing procedures, which allowed obtaining dissimilar oxygen contents in the surrounding atmosphere. The high temperature interaction and reactivity taking place between molten alloy samples and ZrO2 container during DSC tests were evaluated by structural analysis of the resulting interfaces using alloy samples solidified inside the ZrO2 containers. The conducted research has demonstrated methodological difficulties accompanying measurements of the thermophysical properties of Gd-rich alloys by the container-assisted DSC method, particularly when the tests are performed in flowing argon atmosphere with significantly reduced oxygen content. Under non-oxidizing conditions, the degradation of ZrO2 container can take place during DSC testing because the selected Gd40Ti30Zr30 alloy reacts with the ZrO2 to form a continuous interfacial reaction product layer. Under slightly oxidizing conditions, the gadolinium oxide formed in situ on the alloy surface, plays the role of a barrier for direct contact between molten alloy and container and thus may suppress or even prevent the degradation of the container and its subsequent strong bonding with the holder.