Search Results
In situ detection of cracks during laser powder bed fusion using acoustic emission monitoring
2022, Seleznev, Mikhail, Gustmann, Tobias, Friebel, Judith Miriam, Peuker, Urs Alexander, Kühn, Uta, Hufenbach, Julia Kristin, Biermann, Horst, Weidner, Anja
Despite rapid development of laser powder bed fusion (L-PBF) and its monitoring techniques, there is still a lack of in situ crack detection methods, among which acoustic emission (AE) is one of the most sensitive. To elaborate on this topic, in situ AE monitoring was applied to L-PBF manufacturing of a high-strength Al92Mn6Ce2 (at. %) alloy and combined with subsequent X-ray computed tomography. By using a structure borne high-frequency sensor, even a simple threshold-based monitoring was able to detect AE activity associated with cracking, which occurred not only during L-PBF itself, but also after the build job was completed, i.e. in the cooling phase. AE data analysis revealed that crack-related signals can easily be separated from the background noise (e.g. inert gas circulation pump) through their specific shape of a waveform, as well as their energy, skewness and kurtosis. Thus, AE was verified to be a promising method for L-PBF monitoring, enabling to detect formation of cracks regardless of their spatial and temporal occurrence.
Virtual Testing of Geometrically Imperfect Additively Manufactured Lattice Structures
2021, Gebhardt, Ulrike, Kästner, Markus, Hufenbach, Julia Kristin, Kühn, Uta, Berner, Matthias, Holtzhausen, Stefan
Additively manufactured lattice structures increase the lightweight potential of components for technical applications. When modelling the mechanical behaviour of those lattice structures, imperfections within the structures need to be considered. In this contribution we investigate the effect of process induced pores of varying size and location inside the lattice structure during pressure tests using a 2D minimal model in two configurations. It shows that the location of pores with respect to the configuration of the model has a strong influence on whether the imperfection decreases the mechanical performance.
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting
2022, Kühn, Uta, Sander, Jan, Gabrysiak, Katharina Nicole, Giebeler, Lars, Kosiba, Konrad, Pilz, Stefan, Neufeld, Kai, Boehm, Anne Veronika, Hufenbach, Julia Kristin
A high-performance tool steel with the nominal composition Fe85Cr4Mo8V2C1 (wt%) was processed by three different manufacturing techniques with rising cooling rates: conventional gravity casting, centrifugal casting and an additive manufacturing process, using laser powder bed fusion (LPBF). The resulting material of all processing routes reveals a microstructure, which is composed of martensite, austenite and carbides. However, comparing the size, the morphology and the weight fraction of the present phases, a significant difference of the gravity cast samples is evident, whereas the centrifugal cast material and the LPBF samples show certain commonalities leading finally to similar mechanical properties. This provides the opportunity to roughly estimate the mechanical properties of the material fabricated by LPBF. The major benefit arises from the required small material quantity and the low resources for the preparation of samples by centrifugal casting in comparison to the additive manufacturing process. Concluding, the present findings demonstrate the high attractiveness of centrifugal casting for the effective material screening and hence development of novel alloys adapted to LPBF-processing.
Additively manufactured AlSi10Mg lattices – Potential and limits of modelling as-designed structures
2022, Gebhardt, Ulrike, Gustmann, Tobias, Giebeler, Lars, Hirsch, Franz, Hufenbach, Julia Kristin, Kästner, Markus
Additive manufacturing overcomes the restrictions of classical manufacturing methods and enables the production of near-net-shaped, complex geometries. In that context, lattice structures are of high interest due to their superior weight reduction potential. AlSi10Mg is a well-known alloy for additive manufacturing and well suited for such applications due to its high strength to material density ratio. It has been selected in this study for producing bulk material and complex geometries of a strut-based lattice type (rhombic dodecahedron). A detailed characterisation of as-built and heat-treated specimens has been conducted including microstructural analyses, identification of imperfections and rigorous mechanical testing under different load conditions. An isotropic elastic–plastic material model is deduced on the basis of tension test results of bulk material test specimens. Performed experiments under compression, shear, torsion and tension load are compared to their virtual equivalents. With the help of numerical modelling, the overall structural behaviour was simulated using the detailed lattice geometry and was successfully predicted by the presented numerical models. The discussion of the limits of this approach aims to evaluate the potential of the numerical assessment in the modelling of the properties for novel lightweight structures.