21 results
Search Results
Now showing 1 - 10 of 21
- ItemHydrolysis Stability of Bidentate Phosphites Utilized as Modifying Ligands in the Rh-Catalyzed n-Regioselective Hydroformylation of Olefins(Washington, DC : ACS, 2016) Zhang, Baoxin; Jiao, Haijun; Michalik, Dirk; Kloß, Svenja; Deter, Lisa Marie; Selent, Detlef; Spannenberg, Anke; Franke, Robert; Börner, ArminThe stability of ligands and catalysts is an almost neglected issue in homogeneous catalysis, but it is crucial for successful application of this methodology in technical scale. We have studied the effect of water on phosphites, which are the most applied cocatalysts in the n-regioselective homogeneous Rh-catalyzed hydroformylation of olefins. The stability of the bidentate nonsymmetrical diphosphite L1, as well as its two monophosphite constituents L2 and L3, toward hydrolysis was investigated by means of in situ NMR spectroscopy under similar conditions as applied in industry. Hydrolysis pathways, intermediates, and kinetics were clarified. DFT calculations were used to support the experimentally found data. The acylphosphite unit L2, which reacts with water in an unselective manner, was proven to be much less stable than the phenolphosphite L3. The stability of the bidentate ligand L1 can be therefore mainly attributed to its phenolphosphite moiety. With an excess of water, the hydrolysis of L1 and L2 as well as their Rh-complexes is first-order with respect to the phosphite. Surprisingly, coordination to Rh significantly stabilizes the monodentate ligand L2, while in strong contrast, the bidentate ligand L1 decomposes faster in the Rh complex. NMR spectroscopy provided evidence for the existence of species from decomposition of phosphites, which can likewise coordinate as ligands to the metal. Electron-withdrawing groups in the periphery of the acylphosphite moiety decrease the stability of L1, whereas 3,5-disubstituted salicylic acid derivatives with bulky groups showed superior stability. These modifications of L1 also give rise to different catalytic performances in the n-regioselective hydroformylation of n-octenes and 2-pentene, from which the 3,5-di-t-butyl-substituted ligand offered a higher n-regioselectivity accompanied by a lowering of the reaction rate in comparison to the parent ligand L1.
- ItemA General and Highly Selective Palladium-Catalyzed Hydroamidation of 1,3-Diynes(Weinheim : Wiley-VCH, 2021) Liu, Jiawang; Schneider, Carolin; Yang, Ji; Wei, Zhihong; Jiao, Haijun; Franke, Robert; Jackstell, Ralf; Beller, MatthiasA chemo-, regio-, and stereoselective mono-hydroamidation of (un)symmetrical 1,3-diynes is described. Key for the success of this novel transformation is the utilization of an advanced palladium catalyst system with the specific ligand Neolephos. The synthetic value of this general approach to synthetically useful α-alkynyl-α, β-unsaturated amides is showcased by diversification of several structurally complex molecules and marketed drugs. Control experiments and density-functional theory (M06L-SMD) computations also suggest the crucial role of the substrate in controlling the regioselectivity of unsymmetrical 1,3-diynes. © 2020 The Authors. Published by Wiley-VCH GmbH
- ItemA Stable Manganese Pincer Catalyst for the Selective Dehydrogenation of Methanol(Weinheim : Wiley-VCH, 2016-12-2) Andérez-Fernández, MarÃa; Vogt, Lydia K.; Fischer, Steffen; Zhou, Wei; Jiao, Haijun; Garbe, Marcel; Elangovan, Saravanakumar; Junge, Kathrin; Junge, Henrik; Ludwig, Ralf; Beller, MatthiasFor the first time, structurally defined manganese pincer complexes catalyze the dehydrogenation of aqueous methanol to hydrogen and carbon dioxide, which is a transformation of interest with regard to the implementation of a hydrogen and methanol economy. Excellent long-term stability was demonstrated for the Mn-PNPiPr catalyst, as a turnover of more than 20 000 was reached. In addition to methanol, other important hydrogen carriers were also successfully dehydrogenated.
- ItemLigand-Controlled Palladium-Catalyzed Carbonylation of Alkynols : Highly Selective Synthesis of α-Methylene-β-Lactones(Weinheim : Wiley-VCH, 2020) Ge, Yao; Ye, Fei; Liu, Jiawang; Yang, Ji; Spannenberg, Anke; Jiao, Haijun; Jackstell, Ralf; Beller, MatthiasThe first general and regioselective Pd-catalyzed cyclocarbonylation to give α-methylene-β-lactones is reported. Key to the success for this process is the use of a specific sterically demanding phosphine ligand based on N-arylated imidazole (L11) in the presence of Pd(MeCN)2Cl2 as pre-catalyst. A variety of easily available alkynols provide under additive-free conditions the corresponding α-methylene-β-lactones in moderate to good yields with excellent regio- and diastereoselectivity. The applicability of this novel methodology is showcased by the direct carbonylation of biologically active molecules including natural products. © 2020 The Authors. Published by Wiley-VCH GmbH
- ItemToward Green Acylation of (Hetero)arenes: Palladium-Catalyzed Carbonylation of Olefins to Ketones(Washington, DC : ACS Publ., 2017) Liu, Jie; Wei, Zhihong; Jiao, Haijun; Jackstell, Ralf; Beller, MatthiasGreen Friedel-Crafts acylation reactions belong to the most desired transformations in organic chemistry. The resulting ketones constitute important intermediates, building blocks, and functional molecules in organic synthesis as well as for the chemical industry. Over the past 60 years, advances in this topic have focused on how to make this reaction more economically and environmentally friendly by using green acylating conditions, such as stoichiometric acylations and catalytic homogeneous and heterogeneous acylations. However, currently well-established methodologies for their synthesis either produce significant amounts of waste or proceed under harsh conditions, limiting applications. Here, we present a new protocol for the straightforward and selective introduction of acyl groups into (hetero)arenes without directing groups by using available olefins with inexpensive CO. In the presence of commercial palladium catalysts, inter- and intramolecular carbonylative C-H functionalizations take place with good regio- and chemoselectivity. Compared to classical Friedel-Crafts chemistry, this novel methodology proceeds under mild reaction conditions. The general applicability of this methodology is demonstrated by the direct carbonylation of industrial feedstocks (ethylene and diisobutene) as well as of natural products (eugenol and safrole). Furthermore, synthetic applications to drug molecules are showcased.
- ItemHighly selective visible light-induced Ti–O bond splitting in an ansa-titanocene dihydroxido complex(Cambridge : Soc., 2015) Godemann, Christian; Dura, Laura; Hollmann, Dirk; Grabow, Kathleen; Bentrup, Ursula; Jiao, Haijun; Schulz, Axel; Brückner, Angelika; Beweries, TorstenIrradiation of a substituted ansa-titanocene(IV) dihydroxido complex with visible light induces Ti–O bond dissociation. In contrast to previous studies on structurally similar unbridged complexes, no side reactions are observed and formation of the Ti(III) species is highly selective. The formation of OH radicals was proved using a biradicaloid species.
- ItemDetermining surface structure and stability of ε-Fe2C, χ-Fe5C2, θ-Fe3C and Fe4C phases under carburization environment from combined DFT and atomistic thermodynamic studies(London : Taylor & Francis, 2014) Zhao, Shu; Liu, Xing-Wu; Huo, Chun-Fang; Li, Yong-Wang; Wang, Jianguo; Jiao, HaijunThe chemical–physical environment around iron based FTS catalysts under working conditions is used to estimate the influences of carbon containing gases on the surface structures and stability of ε-Fe2C, χ-Fe5C2, θ-Fe3C and Fe4C from combined density functional theory and atomistic–thermodynamic studies. Higher carbon content gas has higher carburization ability; while higher temperature and lower pressure as well as higher H2/CO ratio can suppress carburization ability. Under wide ranging gas environment, ε-Fe2C, χ-Fe5C2 and θ-Fe3C have different morphologies, and the most stable non-stoichiometric termination changes from carbon-poor to carbon-rich (varying surface Fe/C ratio) upon the increase in ΔμC. The most stable surfaces of these carbides have similar surface bonding pattern, and their surface properties are related to some common phenomena of iron based catalysts. For these facets, χ-Fe5C2-(100)-2.25 is most favored for CO adsorption and CH4 formation, followed by θ-Fe3C-(010)-2.33, ε-Fe2C-(121)-2.00 and Fe4C-(100)-3.00, in line with surface work function and the charge of the surface carbon atoms.
- ItemCobalt-Catalyzed Aqueous Dehydrogenation of Formic Acid(Weinheim : Wiley-VCH, 2019) Zhou, Wei; Wei, Zhihong; Spannenberg, Anke; Jiao, Haijun; Junge, Kathrin; Junge, Henrik; Beller, MatthiasAmong the known liquid organic hydrogen carriers, formic acid attracts increasing interest in the context of safe and reversible storage of hydrogen. Here, the first molecularly defined cobalt pincer complex is disclosed for the dehydrogenation of formic acid in aqueous medium under mild conditions. Crucial for catalytic activity is the use of the specific complex 3. Compared to related ruthenium and manganese complexes 7 and 8, this optimal cobalt complex showed improved performance. DFT computations support an innocent non-classical bifunctional outer-sphere mechanism on the triplet state potential energy surface. © 2019 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.
- ItemCooperative catalytic methoxycarbonylation of alkenes: Uncovering the role of palladium complexes with hemilabile ligands(Cambridge : RSC, 2018) Dong, Kaiwu; Sang, Rui; Wei, Zhihong; Liu, Jie; Dühren, Ricarda; Spannenberg, Anke; Jiao, Haijun; Neumann, Helfried; Jackstell, Ralf; Franke, Robert; Beller, MatthiasMechanistic studies of the catalyst [Pd2(dba)3/1,1′-bis(tert-butyl(pyridin-2-yl)phosphanyl)ferrocene, L2] for olefin alkoxycarbonylation reactions are described. X-ray crystallography reveals the coordination of the pyridyl nitrogen atom in L2 to the palladium center of the catalytic intermediates. DFT calculations on the elementary steps of the industrially relevant carbonylation of ethylene (the Lucite α-process) indicate that the protonated pyridyl moiety is formed immediately, which facilitates the formation of the active palladium hydride complex. The insertion of ethylene and CO into this intermediate leads to the corresponding palladium acyl species, which is kinetically reversible. Notably, this key species is stabilized by the hemilabile coordination of the pyridyl nitrogen atom in L2. The rate-determining alcoholysis of the acyl palladium complex is substantially facilitated by metal-ligand cooperation. Specifically, the deprotonation of the alcohol by the built-in base of the ligand allows a facile intramolecular nucleophilic attack on the acyl palladium species concertedly. Kinetic measurements support this mechanistic proposal and show that the rate of the carbonylation step is zero-order dependent on ethylene and CO. Comparing CH3OD and CH3OH as nucleophiles suggests the involvement of (de)protonation in the rate-determining step.
- ItemA selective route to aryl-triphosphiranes and their titanocene-induced fragmentation(Cambridge : RSC, 2019) Schumann, André; Reiß, Fabian; Jiao, Haijun; Rabeah, Jabor; Siewert, Jan-Erik; Krummenacher, Ivo; Braunschweig, Holger; Hering-Junghans, ChristianTriphosphiranes are three-membered phosphorus cycles and their fundamental reactivity has been studied in recent decades. We recently developed a high-yielding, selective synthesis for various aryl-substituted triphosphiranes. Variation of the reaction conditions in combination with theoretical studies helped to rationalize the formation of these homoleptic phosphorus ring systems and highly reactive intermediates could be isolated. In addition we showed that a titanocene synthon [Cp2Ti(btmsa)] facilitates the selective conversion of these triphosphiranes into titanocene diphosphene complexes. This unexpected reactivity mode was further studied theoretically and experimental evidence is presented for the proposed reaction mechanism. This journal is © The Royal Society of Chemistry.