Search Results
Carbide-Derived Niobium Pentoxide with Enhanced Charge Storage Capacity for Use as a Lithium-Ion Battery Electrode
2020, Budak, Ö., Geißler, M., Becker, D., Kruth, A., Quade, A., Haberkorn, R., Kickelbick, G., Etzold, B. J. M., Presser, V.
Nb2O5 has been explored as a promising anode material for use as lithium-ion batteries (LIBs), but depending on the crystal structure, the specific capacity was always reported to be usually around or below 200 mAh/g. For the first time, we present coarse-grained Nb2O5 materials that significantly overcome this capacity limitation with the promise of enabling high power applications. Our work introduces coarse-grained carbide-derived Nb2O5 phases obtained either by a one-step or a two-step bulk conversion process. By in situ production of chlorine gas from metal chloride salt at ambient pressure, we obtain in just one step directly orthorhombic Nb2O5 alongside carbide-derived carbon (o-Nb2O5/CDC). In situ formation of chlorine gas from metal chloride salt under vacuum conditions yields CDC covering the remaining carbide core, which can be transformed into metal oxides covered by a carbon shell upon thermal treatment in CO2 gas. The two-step process yielded a mixed-phase tetragonal and monoclinic Nb2O5 with CDC (m-Nb2O5/CDC). Our combined diffraction and spectroscopic data confirm that carbide-derived Nb2O5 materials show disordering of the crystallographic planes caused by oxygen deficiency in the structural units and, in the case of m-Nb2O5/CDC, severe stacking faults. This defect engineering allows access to a very high specific capacity exceeding the two-electron transfer process of conventional Nb2O5. The charge storage capacities of the resulting m-Nb2O5/CDC and o-Nb2O5/CDC are, in both cases, around 300 mAh/g at a specific current of 10 mA/g, thereby, the values are significantly higher than that of the state-of-the-art for Nb2O5 as a LIB anode. Carbide-derived Nb2O5 materials also show robust cycling stability over 500 cycles with capacity fading only 24% for the sample m-Nb2O5/CDC and 28% for o-Nb2O5/CDC, suggesting low degree of expansion/compaction during lithiation and delithiation.
Facile and scalable synthesis of sub-micrometer electrolyte particles for solid acid fuel cells
2018, Lohmann-Richters, F.P., Odenwald, C., Kickelbick, G., Abel, B., Varga, Á.
Nanostructuring fuel cell electrodes is a viable pathway to reach high performance with low catalyst loadings. Thus, in solid acid fuel cells, small CsH2PO4 electrolyte particles are needed for the composite powder electrodes as well as for thin electrolyte membranes. Previous efforts have resulted in significant improvements in performance when using sub-micrometer CsH2PO4 particles, but laborious methods with low throughput were employed for their synthesis. In this work, we present a simple, robust, and scalable method to synthesize CsH2PO4 particles with diameters down to below 200 nm. The method involves precipitating CsH2PO4 by mixing precursor solutions in alcohol in the presence of a dispersing additive. The influence of the concentrations, the batch size, the solvent, and the mixing process is investigated. The particle size decreases down to 119 nm with increasing amount of dispersing additive. Mixing in a microreactor leads to a narrower particle size distribution. The particle shape can be tuned by varying the solvent. The ionic conductivity under solid acid fuel cell conditions is 2.0 × 10-2 S cm-1 and thus close to that of CsH2PO4 without dispersing additive.