2021, Wang, Defu, Eissa, Mohamed Hussein, Schmalz, Klaus, Kampfe, Thomas, Kissinger, Dietmar

This article presents a reflectometer-based on-chip dielectric sensor with integrated transducers at 240 GHz. The chip simplifies the measurement of a vector network analyzer (VNA) to sense the incident and reflected waves by using two heterodyne mixer-based receivers with a dielectric sensing element. Radio frequency (RF) and local oscillator (LO) submillimeter waves are generated by two frequency multiplier chains, respectively. Two back-to-back identical differential side-coupled directive couplers are proposed to separate the incident and reflected signals and couple them to mixers. Both transmission line and coplanar stripline transducers are proposed and integrated with reflectometer to investigate the sensitivity of dielectric sensors. The latter leads to a larger power variation of the reflectometer by providing more sufficient operating bands for the magnitude and phase slope of S11 . The readout of the transducers upon exposure to liquids is performed by the measurement of their reflected signals using two external excitation sources. The experimental dielectric sensing is demonstrated by using binary methanol–ethanol mixture placed on the proposed on-chip dielectric sensor in the assembled printed circuit board. It enables a maximum 8 dB of the power difference between the incident and reflected channels on the measurement of liquid solvents. Both chips occupy an area of 4.03 mm 2 and consume 560 mW. Along with a wide operational frequency range from 200 to 240 GHz, this simplified one-port-VNA-based on-chip device makes it feasible for the use of handle product and suitable for the submillimeter-wave dielectric spectroscopy applications.

2021, Kissinger, Dietmar, Kahmen, Gerhard, Weigel, Robert

This invited paper reviews the progress of silicon–germanium (SiGe) bipolar-complementary metal–oxide–semiconductor (BiCMOS) technology-based integrated circuits (ICs) during the last two decades. Focus is set on various transceiver (TRX) realizations in the millimeter-wave range from 60 GHz and at terahertz (THz) frequencies above 300 GHz. This article discusses the development of SiGe technologies and ICs with the latter focusing on the commercially most important applications of radar and beyond 5G wireless communications. A variety of examples ranging from 77-GHz automotive radar to THz sensing as well as the beginnings of 60-GHz wireless communication up to THz chipsets for 100-Gb/s data transmission are recapitulated. This article closes with an outlook on emerging fields of research for future advancement of SiGe TRX performance.

2019, Ng, Herman Jalli, Hasan, Raqibul, Kissinger, Dietmar

A scalable four-channel multiple-input multiple-output (MIMO) radar that features a modular system architecture and a novel frequency-division multiplexing approach is presented in this article. It includes a single 30-GHz voltage-controlled oscillator (VCO) for the local oscillator signal generation, four cascaded 120-GHz transceivers with a frequency quadrupler, and on-board differential series-fed patch antennas. The utilized uniform antenna configuration results in 16 virtual array elements and enables an angular resolution of 6.2°. The vector modulators in the transmit (TX) paths allow the application of complex bit streams of second-order delta-sigma modulators easily generated on a field-programmable gate array (FPGA) to implement single-sideband (SSB) modulation on the TX signals resulting in orthogonal waveforms for the MIMO operation. Only one phase-locked loop and no digital-To-Analog converter is required. The waveform diversity also allows the simultaneous transmission of the TX signals to reduce the measurement time. The application of the SSB modulation on the frequency-modulated continuous-wave MIMO radar requires only half of the intermediate frequency bandwidth compared with the double-sideband modulation. The issue of the phase and amplitude mismatches at the virtual array elements due to the scalable radar architecture is addressed and a calibration solution is introduced in this article. Radar measurements using different numbers of virtual array elements were compared and the digital-beamforming method was applied to the results to create 2-D images. © 1963-2012 IEEE.