5 results
Search Results
Now showing 1 - 5 of 5
- ItemAntimicrobial Brushes on Titanium via “Grafting to” Using Phosphonic Acid/Pyridinium Containing Block Copolymers(Weinheim : Wiley-VCH GmbH, 2023) Methling, Rafael; Dückmann, Oliver; Simon, Frank; Wolf‐Brandstetter, Cornelia; Kuckling, DirkCoating medical implants with antibacterial polymers may prevent postoperative infections which are a common issue for conventional titanium implants and can even lead to implant failure. Easily applicable diblock copolymers are presented that form polymer brushes via “grafting to” mechanism on titanium and equip the modified material with antibacterial properties. The polymers carry quaternized pyridinium units to combat bacteria and phosphonic acid groups which allow the linear chains to be anchored to metal surfaces in a convenient coating process. The polymers are synthesized via reversible-addition-fragmentation-chain-transfer (RAFT) polymerization and postmodifications and are characterized using NMR spectroscopy and SEC. Low grafting densities are a major drawback of the “grafting to” approach compared to “grafting from”. Thus, the number of phosphonic acid groups in the anchor block are varied to investigate and optimize the surface binding. Modified titanium surfaces are examined regarding their composition, wetting behavior, streaming potential, and coating stability. Evaluation of the antimicrobial properties revealed reduced bacterial adhesion and biofilm formation for certain polymers, albeit the cell biocompatibility against human gingival fibroblasts is also impaired. The presented findings show the potential of easy-to-apply polymer coatings and aid in designing next-generation implant surface modifications.
- ItemContinuous Flow Synthesis of Azoxybenzenes by Reductive Dimerization of Nitrosobenzenes with Gel‐Bound Catalysts(Weinheim : Wiley-VCH Verl., 2021) Schmiegel, Carsten J.; Berg, Patrik; Obst, Franziska; Schoch, Roland; Appelhans, Dietmar; Kuckling, DirkIn the search for a new synthetic pathway for azoxybenzenes with different substitution patterns, an approach using a microfluidic reactor with gel-bound proline organocatalysts under continuous flow is presented. Herein the formation of differently substituted azoxybezenes by reductive dimerization of nitrosobenzenes within minutes at mild conditions in good to almost quantitative yields is described. The conversion within the microfluidic reactor is analyzed and used for optimizing and validating different parameters. The effects of the different functionalities on conversion, yield, and reaction times are analyzed in detail by NMR. The applicability of this reductive dimerization is demonstrated for a wide range of differently substituted nitrosobenzenes. The effects of these different functionalities on the structure of the obtained azoxyarenes are analyzed in detail by NMR and single-crystal X-ray diffraction. Based on these results, the turnover number and the turnover frequency were determined.
- ItemThermoresponsive Catechol Based-Polyelectrolyte Complex Coatings for Controlled Release of Bortezomib(Basel : Molecular Diversity Preservation International, 2019) Reis, Berthold; Vehlow, David; Rust, Tarik; Kuckling, Dirk; Müller, MartinTo overcome the high relapse rate of multiple myeloma (MM), a drug delivery coating for functionalization of bone substitution materials (BSM) is reported based on adhesive, catechol-containing and stimuli-responsive polyelectrolyte complexes (PECs). This system is designed to deliver the MM drug bortezomib (BZM) directly to the anatomical site of action. To establish a gradual BZM release, the naturally occurring caffeic acid (CA) is coupled oxidatively to form poly(caffeic acid) (PCA), which is used as a polyanion for complexation. The catechol functionalities within the PCA are particularly suitable to form esters with the boronic acid group of the BZM, which are then cleaved in the body fluid to administer the drug. To achieve a more thorough control of the release, the thermoresponsive poly(N-isoproplyacrylamide-co-dimethylaminoethylmethacrylate) (P(NIPAM-co-DMAEMA)) was used as a polycation. Using turbidity measurements, it was proven that the lower critical solution temperature (LCST) character of this polymer was transferred to the PECs. Further special temperature dependent attenuated total reflection infrared spectroscopy (ATR-FTIR) showed that coatings formed by PEC immobilization exhibit a similar thermoresponsive performance. By loading the coatings with BZM and studying the release in a model system, via UV/Vis it was observed, that both aims, the retardation and the stimuli control of the release, were achieved. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemSwitchable Release of Bone Morphogenetic Protein from Thermoresponsive Poly(NIPAM-co-DMAEMA)/Cellulose Sulfate Particle Coatings(Basel : MDPI, 2018) Müller, Martin; Urban, Birgit; Reis, Berthold; Yu, Xiaoqian; Grab, Anna Luise; Cavalcanti-Adam, Elisabetta Ada; Kuckling, DirkThermoresponsive coatings of poly(N-isopropylacrylamide-co-DMAEMA)/cellulose sulfate (PNIPAM-DMAEMA/CS) complexes are reported eluting bone-morphogenetic-protein-2 (BMP-2) on demand relevant for implant assisted local bone healing. PNIPAM-DMAEMA/CS dispersions contained colloid particles with hydrodynamic radii RH = 170–288 nm at T = 25 °C shrinking to RH = 74–103 nm at T = 60 °C. Obviously, PNIPAM-DMAEMA/CS undergoes volume phase transition (VPT) analogously to pure PNIPAM, when critical VPT temperature (VPTT) is exceeded. Temperature dependent turbidity measurements revealed broad VPT and VPTT 47 °C for PNIPAM-DMAEMA/CS colloid dispersions at pH = 7.0. FTIR spectroscopy on thermoresponsive PNIPAM-DMAEMA/CS particle coatings at germanium model substrates under HEPES buffer indicated both wet-adhesiveness and VPT behavior based on diagnostic band intensity increases with temperature. From respective temperature courses empirical VPTT ≈ 42 °C for PNIPAM-DMAEMA/CS coatings at pH = 7.0 were found, which were comparable to VPTT found for respective dispersions. Finally, the PNIPAM-DMAEMA/CS coatings were loaded with BMP-2 and model protein papain (PAP). Time dependent FTIR spectroscopic measurements showed, that for T = 37 °C there was a relative protein release of ≈30% for PAP and ≈10% for BMP-2 after 24 h, which did not increase further. Heating to T = 42 °C for PAP and to 47 °C for BMP-2 further secondary protein release of ≈20% after 24 h was found, respectively, interesting for clinical applications. BMP-2 eluted even at 47 °C was found to be still biologically active
- ItemNovel Application of Polymer Networks Carrying Tertiary Amines as a Catalyst Inside Microflow Reactors Used for Knoevenagel Reactions(Weinheim : Wiley-VCH Verl., 2020) Berg, Patrik; Obst, Franziska; Simon, David; Richter, Andreas; Appelhans, Dietmar; Kuckling, DirkA novel application is described for utilizing hydrogel dots as organocatalyst carriers inside microfluidic reactors. Tertiary amines were covalently immobilized in the hydrogel dots. Due to the diffusion of reactants within the swollen hydrogel dots, the accessible amount of catalysts inside a microfluidic reactor chamber can be increased compared to the accessible amount of surface-bound catalysts. To perform fast Knoevenagel reactions, important flow parameters had to be validated to optimize the reactor performance while keeping the dimensions of the reactor chamber constant; e.g. the height of the hydrogel dots had to be adjusted to the invariable dimensions of the reactor chamber, or an adjustment of organocatalysts in the hydrogel dots had to be validated to achieve the highest conversion rate during a certain residence time. To characterize the conversion, nuclear magnetic resonance (NMR) and UV/Vis-spectroscopy were utilized as an offline and online method, respectively. With suitable hydrogel dots, the influence of different flow parameters (e.g., operating flow rate and reactant concentration) on the selected model reactions in the microfluidic reactor was investigated. Finally, a variety of reactants were screened with the optimized flow parameters. With these results, the turnover frequency was determined for the Knoevenagel reactions in a microfluidic reactor, and the results were compared with published data that were determined by other synthetic approaches. © 2020 The Authors published by Wiley-VCH GmbH