Filters

2017 - 20204

More filters

20214
Reset filters

Settings

Author: Möller, Martin × End date: 2021 × Start date: 2021 × Start date: 1999 × DDC: 540 × Type: Text × WGL Institute: DWI ×

Search Results

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Formaldehyde-free curing of cotton cellulose fabrics in anhydrous media
    (New York, NY : Wiley, 2020) Mommer, Stefan; Kurniadi, Juliana; Keul, Helmut; Möller, Martin
    The effect of formaldehyde-free curing on standard cotton cellulose fabrics in anhydrous media is studied. Different crosslinkers are applied via (1) a pad-cure-dry process (solid/liquid) and (2) in a vapor chamber (solid/gas). The performance of each crosslinker and set of conditions is assessed by measuring dry crease recovery angles, DCRAs. We find that in control samples (treatment without crosslinker) the DCRAs are altered depending on the solvent. Using DMF, carbonyldiimidazole shows the best DCRA (160.1°, 15° higher than the non-treated fabrics). In ethyl acetate, triglycidyl isocyanurate shows the highest DCRA (22° higher than the control). The most promising crosslinkers are applied with selected catalysts known from literature. Here, trigycidyl isocyanurate in combination with the superbase P4-t-Bu gives the best DCRA (35° higher than the control). Using the vapor-chemical finishing, divinylsulfone as crosslinker increases the DCRA to 162.7° (18° higher than non-treated fabrics). Hence, cotton cellulose fabrics can be successfully finished in anhydrous conditions. © 2019 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020, 137, 48371. © 2019 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc.
  • Thumbnail Image
    Item
    4D Printing of a Light-Driven Soft Actuator with Programmed Printing Density
    (Washington, DC : ACS Publications, 2020) Nishiguchi, Akihiro; Zhang, Hang; Schweizerhof, Sjören; Schulte, Marie Friederike; Mourran, Ahmed; Möller, Martin
    There is a growing interest in the concept of four-dimensional (4D) printing that combines a three-dimensional (3D) manufacturing process with dynamic modulation for bioinspired soft materials exhibiting more complex functionality. However, conventional approaches have drawbacks of low resolution, control of internal micro/nanostructure, and creation of fast, complex actuation due to a lack of high-resolution fabrication technology and suitable photoresist for soft materials. Here, we report an approach of 4D printing that develops a bioinspired soft actuator with a defined 3D geometry and programmed printing density. Multiphoton lithography (MPL) allows for controlling printing density in gels at pixel-by-pixel with a resolution of a few hundreds of nanometers, which tune swelling behaviors of gels in response to external stimuli. We printed a 3D soft actuator composed of thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) and gold nanorods (AuNRs). To improve the resolution of printing, we synthesized a functional, thermoresponsive macrocrosslinker. Through plasmonic heating by AuNRs, nanocomposite-based soft actuators undergo nonequilibrium, programmed, and fast actuation. Light-mediated manufacture and manipulation (MPL and photothermal effect) offer the feasibility of 4D printing toward adaptive bioinspired soft materials. Copyright © 2020 American Chemical Society.
  • Thumbnail Image
    Item
    Soft Microrobots Employing Nonequilibrium Actuation via Plasmonic Heating
    (Weinheim : Wiley-VCH, 2017) Mourran, Ahmed; Zhang, Hang; Vinokur, Rostislav; Möller, Martin
    A soft microrobot composed of a microgel and driven by the light-controlled nonequilibrium dynamics of volume changes is presented. The photothermal response of the microgel, containing plasmonic gold nanorods, enables fast heating/cooling dynamics. Mastering the nonequilibrium response provides control of the complex motion, which goes beyond what has been so far reported for hydrophilic microgels.
  • Thumbnail Image
    Item
    Physical gels of poly(vinylamine) by thermal curing
    (Cambridge : Royal Society of Chemistry, 2020) Fischer, Thorsten; Köhler, Jens; Möller, Martin; Singh, Smriti
    Physical gels are a versatile class of materials which can find application in sensors, electrochemistry, biomedicine or rheological modifiers. Herein, we present a hydrogen-bonded physical gel which is based on the interaction between phenylcarbonate telechelic poly(ethylene glycol) (PEG-PC) and poly(vinyl amine-co-acetamide) (p(VAm-co-VAA)). The critical gelation concentration was found to be 10 wt% by rheology and NMR. UV-vis spectroscopy and dynamic light scattering reveal the formation of aggregates in the gel. Rheology and differential scanning calorimetry (DSC) was used to show the effect of thermal curing on the mechanical properties of the physical gel. © The Royal Society of Chemistry 2020.