19 results
Search Results
Now showing 1 - 10 of 19
- ItemPolymer Brush-Functionalized Chitosan Hydrogels as Antifouling Implant Coatings(Columbus, Ohio : American Chemical Society, 2017) Buzzacchera, Irene; Vorobii, Mariia; Kostina, Nina Yu; de Los Santos Pereira, Andres; Riedel, Tomáš; Bruns, Michael; Ogieglo, Wojciech; Möller, Martin; Wilson, Christopher J.; Rodriguez-Emmenegger, CesarImplantable sensor devices require coatings that efficiently interface with the tissue environment to mediate biochemical analysis. In this regard, bioinspired polymer hydrogels offer an attractive and abundant source of coating materials. However, upon implantation these materials generally elicit inflammation and the foreign body reaction as a consequence of protein fouling on their surface and concomitant poor hemocompatibility. In this report we investigate a strategy to endow chitosan hydrogel coatings with antifouling properties by the grafting of polymer brushes in a "grafting-from" approach. Chitosan coatings were functionalized with polymer brushes of oligo(ethylene glycol) methyl ether methacrylate and 2-hydroxyethyl methacrylate using photoinduced single electron transfer living radical polymerization and the surfaces were thoroughly characterized by XPS, AFM, water contact angle goniometry, and in situ ellipsometry. The antifouling properties of these new bioinspired hydrogel-brush coatings were investigated by surface plasmon resonance. The influence of the modifications to the chitosan on hemocompatibility was assessed by contacting the surfaces with platelets and leukocytes. The coatings were hydrophilic and reached a thickness of up to 180 nm within 30 min of polymerization. The functionalization of the surface with polymer brushes significantly reduced the protein fouling and eliminated platelet activation and leukocyte adhesion. This methodology offers a facile route to functionalizing implantable sensor systems with antifouling coatings that improve hemocompatibility and pave the way for enhanced device integration in tissue.
- ItemThermodynamic Parameters of Temperature-Induced Phase Transition for Brushes onto Nanoparticles: Hydrophilic versus Hydrophobic End-Groups Functionalization(Weinheim : Wiley-VCH, 2017) Schweizerhof, Sjören; Demco, Dan Eugen; Mourran, Ahmed; Keul, Helmut; Fechete, Radu; Möller, MartinQuantification of the stimuli-responsive phase transition in polymers is topical and important for the understanding and development of novel stimuli-responsive materials. The temperature-induced phase transition of poly(N-isopropylacrylamide) (PNIPAm) with one thiol end group depends on the confinement—free polymer or polymer brush—on the molecular weight and on the nature of the second end. This paper describes the synthesis of heterotelechelic PNIPAm of different molecular weights with a thiol end group—that specifically binds to gold nanorods and a hydrophilic NIPAm end group by reversible addition-fragmentation chain-transfer polymerization. Proton high-resolution magic angle sample spinning NMR spectra are used as an indicator of the polymer chain conformations. The characteristics of phase transition given by the transition temperature, entropy, and width of transition are obtained by a two-state model. The dependence of thermodynamic parameters on molecular weight is compared for hydrophilic and hydrophobic end functional-free polymers and brushes.
- ItemPolymers Diffusivity Encoded by Stimuli-Induced Phase Transition: Theory and Application to Poly(N-Isopropylacrylamide) with Hydrophilic and Hydrophobic End Groups(Weinheim : Wiley-VCH, 2018) Schweizerhof, Sjören; Demco, Dan Eugen; Mourran, Ahmed; Fechete, Radu; Möller, MartinThe self-diffusion of various nano-objects investigated by high-resolution nuclear magnetic resonance diffusometry proves to be an efficient method for the characterization of dynamics, aggregation kinetic, and matrix morphology. This study investigates how the two-state model and Boltzmann function approach can be used for the evaluation of the thermodynamic parameters of temperature-induced phase transition encoded in polymer diffusivity. The characteristics of the phase transition given by the transition temperature, change of entropy, and width of transition are obtained for poly(N-isopropylacrylamide) (PNIPAm) linear polymers with hydrophilic and hydrophobic end-group functionalization. The effect of end groups upon the polymer diffusivity is investigated as a function of molecular weight (M n), from which fractal dimensions and hydrodynamic drag coefficients are obtained. The PNIPAm diffusivity is affected strongly by the end groups, and it is reflected in the hydrodynamic radius dependence upon molecular weight that obeys different power-law relations. In this study, the synthesis of α-ω-heterotelechelic PNIPAm of different molecular weights with a thiol end group and a hydrophilic NIPAm-like as well as a hydrophobic benzyl end group are described by reversible addition–fragmentation chain-transfer polymerization.
- ItemApproach to Obtain Electrospun Hydrophilic Fibers and Prevent Fiber Necking(New York, NY [u.a.] : Wiley InterScience, 2019) Fischer, Thorsten; Möller, Martin; Singh, SmritiSolution electrospinning of a blend containing a hydrophobic polymer with a hydrophilic functional polymer as an additive is a simple and straight-forward route to obtain functional and hydrophilic fibers accompanied by the mechanical properties of the hydrophobic polymer. However, this process of thermodynamically unfavored surface segregation of the hydrophilic additive is not well understood. To understand the process the dependencies of the surface hydrophilization on type of hydrophilic polymers, the solvent, and the process, using poly(caprolactone) (PCL) as the matrix polymer is explored. The results show that hydrophilic fibers can be obtained using different additive hydrophilic polymers. The combination of polymer blends which show this effect can be predicted using the Flory–Huggins interaction parameter. In addition mechanical and micromechanical properties of PCL fibers blended with NCO-terminated star-shaped poly(ethylene glycol) (sPEG-NCO) as additive are investigated. In this context blending with sPEG-NCO turns out to be a powerful tool to prevent fiber necking rendering this method an interesting candidate for tissue engineering application, where it is mandatory to retain the surface properties under mechanical stress.
- ItemThe Influence of Particle Size Distribution and Shell Imperfections on the Plasmon Resonance of Au and Ag Nanoshells(New York, NY [u.a.] : Springer, 2017) Mann, Daniel; Nascimento-Duplat, Daniel; Keul, Helmut; Möller, Martin; Verheijen, Marcel; Xu, Man; Urbach, H. Paul; Adam, Aurèle J. L.; Buskens, PascalAu and Ag nanoshells are of interest for a wide range of applications. The plasmon resonance of such nanoshells is the property of interest and can be tuned in a broad spectral regime, ranging from the ultraviolet to the mid-infrared. To date, a large number of manuscripts have been published on the optics of such nanoshells. Few of these, however, address the effect of particle size distribution and metal shell imperfections on the plasmon resonance. Both are inherent to the chemical synthesis of metal nanoshells and therefore to a large extent unavoidable. It is of vital importance to understand their effect on the plasmon resonance, since this determines the scope and limitations of the technology and may have a direct impact on the application of such particles. Here, we elucidate the effect of particle size distribution and imperfections in the metal shell on the plasmon resonance of Au and Ag nanoshells. The size of the polystyrene core and the thickness of the Au and Ag shells are systematically varied to study their influence on the plasmon resonance, and the results are compared to values obtained through optical simulations using extended Mie theory and finite element method. Discrepancies between theory and practice are studied in detail and discussed extensively. Quantitative information on the minimum thickness of the metal shell, which is required to realize a satisfactory plasmon resonance of a metal nanoshell, is provided for Au and Ag.
- ItemSynthesis, Characterization, and Antimicrobial Properties of Peptides Mimicking Copolymers of Maleic Anhydride and 4-Methyl-1-pentene(Basel : Molecular Diversity Preservation International (MDPI), 2018) Szkudlarek, Marian; Heine, Elisabeth; Keul, Helmut; Beginn, Uwe; Möller, MartinSynthetic amphiphilic copolymers with strong antimicrobial properties mimicking natural antimicrobial peptides were obtained via synthesis of an alternating copolymer of maleic anhydride and 4-methyl-1-pentene. The obtained copolymer was modified by grafting with 3-(dimethylamino)-1-propylamine (DMAPA) and imidized in a one-pot synthesis. The obtained copolymer was modified further to yield polycationic copolymers by means of quaternization with methyl iodide and dodecyl iodide, as well as by being sequentially quaternized with both of them. The antimicrobial properties of obtained copolymers were tested against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis, and Staphylococcus aureus. Both tested quaternized copolymers were more active against the Gram-negative E. coli than against the Gram-positive S. aureus. The copolymer modified with both iodides was best when tested against E. coli and, comparing all three copolymers, also exhibited the best effect against S. aureus. Moreover, it shows (limited) selectivity to differentiate between mammalian cells and bacterial cell walls. Comparing the minimum inhibitory concentration (MIC) of Nisin against the Gram-positive bacteria on the molar basis instead on the weight basis, the difference between the effect of Nisin and the copolymer is significantly lower.
- ItemCubosomes from hierarchical self-assembly of poly(ionic liquid) block copolymers([London] : Nature Publishing Group UK, 2017) He, Hongkun; Rahimi, Khosrow; Zhong, Mingjiang; Mourran, Ahmed; Luebke, David R.; Nulwala, Hunaid B.; Möller, Martin; Matyjaszewski, KrzysztofCubosomes are micro- and nanoparticles with a bicontinuous cubic two-phase structure, reported for the self-assembly of low molecular weight surfactants, for example, lipids, but rarely formed by polymers. These objects are characterized by a maximum continuous interface and high interface to volume ratio, which makes them promising candidates for efficient adsorbents and host-guest applications. Here we demonstrate self-assembly to nanoscale cuboidal particles with a bicontinuous cubic structure by amphiphilic poly(ionic liquid) diblock copolymers, poly(acrylic acid)-block-poly(4-vinylbenzyl)-3-butyl imidazolium bis(trifluoromethylsulfonyl)imide, in a mixture of tetrahydrofuran and water under optimized conditions. Structure determining parameters include polymer composition and concentration, temperature, and the variation of the solvent mixture. The formation of the cubosomes can be explained by the hierarchical interactions of the constituent components. The lattice structure of the block copolymers can be transferred to the shape of the particle as it is common for atomic and molecular faceted crystals.
- ItemNovel Antibacterial Polyglycidols: Relationship between Structure and Properties(Basel : MDPI, 2018) Marquardt, Fabian; Stöcker, Cornelia; Gartzen, Rita; Heine, Elisabeth; Keul, Helmut; Möller, MartinAntimicrobial polymers are an attractive alternative to low molecular weight biocides, because they are non-volatile, chemically stable, and can be used as non-releasing additives. Polymers with pendant quaternary ammonium groups and hydrophobic chains exhibit antimicrobial properties due to the electrostatic interaction between polymer and cell wall, and the membrane disruptive capabilities of the hydrophobic moiety. Herein, the synthesis of cationic–hydrophobic polyglycidols with varying structures by post-polymerization modification is presented. The antimicrobial properties of the prepared polyglycidols against E. coli and S. aureus are examined. Polyglycidol with statistically distributed cationic and hydrophobic groups (cationic–hydrophobic balance of 1:1) is compared to (i) polyglycidol with a hydrophilic modification at the cationic functionality; (ii) polyglycidol with both—cationic and hydrophobic groups—at every repeating unit; and (iii) polyglycidol with a cationic–hydrophobic balance of 1:2. A relationship between structure and properties is presented.
- ItemSET-LRP in biphasic mixtures of fluorinated alcohols with water(Cambridge : RSC Publ., 2018) Moreno, Adrian; Liu, Tong; Ding, Liang; Buzzacchera, Irene; Galià, Marina; Möller, Martin; Wilson, Christopher J.; Lligadas, Gerard; Percec, VirgilBiphasic-binary mixtures of 2,2,2-trifluoroethanol (TFE) or 2,2,3,3-tetrafluoropropanol (TFP) with water were used as reaction media to synthesize well-defined poly(methyl acrylate) (PMA) with chain end functionality close to 100% by SET-LRP. Non-activated Cu(0) wire was used as a catalyst, taking advantage of the Cu(0)-activation property that these fluorinated alcohols possess. Biphasic-binary mixtures of water, containing a ligand and Cu(II)Br2 either generated by disproportionation of Cu(I)Br or externally added, and an organic solvent, containing a monomer and a polymer, were studied. Two N-ligands were investigated: the classic tris(2-dimethylaminoethyl)amine (Me6-TREN) and tris(2-aminoethyl)amine (TREN), as a more economically attractive alternative for technological purposes. The results reported here support the replacement of Me6-TREN by TREN, taking into account the fact that the latter requires small loadings of an externally added Cu(II)Br2 deactivator and a ligand in the water phase to mediate a living radical polymerization process. Both catalytic systems ensure efficient SET-LRP processes with first order kinetics to high conversion, linear dependence of experimental Mn on conversion, narrow molecular weight distribution, and near-quantitative chain end functionality.
- ItemHybrid nanostructured particles via surfactant-free double miniemulsion polymerization([London] : Nature Publishing Group UK, 2018) Zhao, Yongliang; Liu, Junli; Chen, Zhi; Zhu, Xiaomin; Möller, MartinDouble emulsions are complex fluid systems, in which droplets of a dispersed liquid phase contain even smaller dispersed liquid droplets. Particularly, water-in-oil-in-water double emulsions provide significant advantages over simple oil-in-water emulsions for microencapsulation, such as carrier of both aqueous and oily payloads and sustained release profile. However, double emulsions are thermodynamically unstable systems consisting typically of relatively large droplets. Here we show that nanoscale water-in-oil-in-water double emulsions can be prepared by adding a silica precursor polymer, hyperbranched polyethoxysiloxane, to the oil phase without any additional surfactants. The resulting double miniemulsions are transformed to robust water@SiO2@polymer@SiO2 nanocapsules via conversion of the precursor to silica and polymerization of the oil phase. Other intriguing nanostructures like nanorattles and Janus-like nanomushrooms can also be obtained by changing preparation conditions. This simple surfactant-free double miniemulsion polymerization technique opens a promising avenue for mass production of various complex hybrid nanostructures that are amenable to numerous applications.