6 results
Search Results
Now showing 1 - 6 of 6
- ItemBuilding Hierarchical Martensite(Weinheim : Wiley-VCH, 2020) Schwabe, Stefan; Niemann, Robert; Backen, Anja; Wolf, Daniel; Damm, Christine; Walter, Tina; Seiner, Hanuš; Heczko, Oleg; Nielsch, Kornelius; Fähler, SebastianMartensitic materials show a complex, hierarchical microstructure containing structural domains separated by various types of twin boundaries. Several concepts exist to describe this microstructure on each length scale, however, there is no comprehensive approach bridging the whole range from the nano- up to the macroscopic scale. Here, it is described for a Ni-Mn-based Heusler alloy how this hierarchical microstructure is built from scratch with just one key parameter: the tetragonal distortion of the basic building block at the atomic level. Based on this initial block, five successive levels of nested building blocks are introduced. At each level, a larger building block is formed by twinning the preceding one to minimize the relevant energy contributions locally. This naturally explains the coexistence of different types of twin boundaries. The scale-bridging approach of nested building blocks is compared with experiments in real and reciprocal space. The approach of nested building blocks is versatile as it can be applied to the broad class of functional materials exhibiting diffusionless transformations. © 2020 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH
- ItemVoltage-controlled on switching and manipulation of magnetization via the redox transformation of β-FeOOH nanoplatelets(Bristol : IOP Publ., 2020) Nichterwitz, Martin; Neitsch, Sabine; Röher, Stefan; Wolf, Daniel; Nielsch, Kornelius; Leistner, KarinRedox-based metal/metal oxide transformations achieved via electrolytic gating recently emerged as a novel, magneto-ionic route for voltage control of magnetism. So far, mainly metal or oxide thin films and nanoporous metal alloy structures are used as starting materials. The present study demonstrates a magneto-ionic transformation starting from a stable electrodeposited FeOOH nanoplatelet structure. The application of a low voltage in a Li-based electrolyte results in the reduction of the virtually non-magnetic FeOOH into ferromagnetic Fe, yielding an ON switching of magnetization. The magnetization can be tuned in a large range by the time of voltage application and remains stable after voltage-switch off. A reversible magneto-ionic change of magnetization of up to 15% is achieved in the resulting iron films with a thickness of about 30 nm. This large magneto-ionic effect is attributed to the enhanced roughness of the iron films obtained from the nanoplatelet structure. The robust, voltage-controlled, and non-volatile ON switching of magnetism starting from a stable oxide structure is promising for the development of energy-efficient magnetic switches, magnetic actuation and may offer new avenues in magnetoelectronic devices. © 2019 IOP Publishing Ltd.
- ItemInfluence of the magnet aspect ratio on the dynamic stiffness of a rotating superconducting magnetic bearing(Bristol : IOP Publ., 2020) Espenhahn, Tilo; Wunderwald, Florian; Möller, Marcel; Sparing, Maria; Hossain, Mahmud; Fuchs, Günter; Abdkader, Anwar; Cherif, Chokri; Nielsch, Kornelius; Hühne, RubenRotating superconducting bearings promise great potential in applications due to their frictionless operation. However, these bearings show a lower dynamic stiffness and damping coefficient compared to ball bearings. In this paper we studied a bearing consisting of a fixed YBCO ring and a rotating magnet above the superconductor. The influence of the magnet aspect ratio on the dynamic stiffness of the bearing was investigated in order to find an optimized size. To change the aspect ratio, we kept the inner diameter of the ring constant and reduced the outer diameter while increasing the ring height. In addition to these magnets, one magnet with a reduced cross-sectional area was studied. The aspect ratio selection was based on preliminary magnetic flux density simulations, which compared the magnetic flux density distribution and the potential radial force for different aspect ratios. To conduct the measurements, the field-cooled magnets were displaced in a lateral direction and then released, resulting in a damped oscillation. The dynamic stiffness constants were calculated for each bearing from the relation of three axis acceleration measurements for different field cooling heights. The comparison of the stiffness constants for the different bearings revealed an optimal aspect ratio for the given YBCO ring. This optimum is almost independent from the cooling height. The comparison between the two magnet rings with similar diameters and different heights was similar for the bearing characteristics at a low cooling height, whereas a significant reduction of stiffness was observed with a larger cooling distance. The difference is bigger for the magnet with a reduced height. The optimal aspect ratio as well as the stiffness dependence on the cross-sectional area was confirmed by simulations of the magnetic flux density distribution. © 2019 IOP Publishing Ltd.
- ItemIncreasing the Diversity and Understanding of Semiconductor Nanoplatelets by Colloidal Atomic Layer Deposition(Weinheim : Wiley-VCH, 2020) Reichhelm, Annett; Hübner, René; Damm, Christine; Nielsch, Kornelius; Eychmüller, AlexanderNanoplatelets (NPLs) are a remarkable class of quantum confined materials with size-dependent optical properties, which are determined by the defined thickness of the crystalline platelets. To increase the variety of species, the colloidal atomic layer deposition method is used for the preparation of increasingly thicker CdSe NPLs. By growing further crystalline layers onto the surfaces of 4 and 5 monolayers (MLs) thick NPLs, species from 6 to 13 MLs are achieved. While increasing the thickness, the heavy-hole absorption peak shifts from 513 to 652 nm, leading to a variety of NPLs for applications and further investigations. The thickness and number of MLs of the platelet species are determined by high-resolution transmission electron microscopy (HRTEM) measurements, allowing the interpretation of several contradictions present in the NPL literature. In recent years, different assumptions are published, leading to a lack of clarity in the fundamentals of this field. Regarding the ongoing scientific interest in NPLs, there is a certain need for clarification, which is provided in this study. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- ItemPhase Selection in Mn–Si Alloys by Fast Solid-State Reaction with Enhanced Skyrmion Stability(Weinheim : Wiley-VCH, 2021) Li, Zichao; Xie, Yufang; Yuan, Ye; Ji, Yanda; Begeza, Viktor; Cao, Lei; Hübner, René; Rebohle, Lars; Helm, Manfred; Nielsch, Kornelius; Prucnal, Slawomir; Zhou, ShengqiangB20-type transition-metal silicides or germanides are noncentrosymmetric materials hosting magnetic skyrmions, which are promising information carriers in spintronic devices. The prerequisite is to prepare thin films on technology-relevant substrates with magnetic skyrmions stabilized at a broad temperature and magnetic-field working window. A canonical example is the B20-MnSi film grown on Si substrates. However, the as-yet unavoidable contamination with MnSi1.7 occurs due to the lower nucleation temperature of this phase. In this work, a simple and efficient method to overcome this problem and prepare single-phase MnSi films on Si substrates is reported. It is based on the millisecond reaction between metallic Mn and Si using flash-lamp annealing (FLA). By controlling the FLA energy density, single-phase MnSi or MnSi1.7 or their mixture can be grown at will. Compared with bulk MnSi, the prepared MnSi films show an increased Curie temperature of up to 41 K. In particular, the magnetic skyrmions are stable over a much wider temperature and magnetic-field range than reported previously. The results constitute a novel phase selection approach for alloys and can help to enhance specific functional properties, such as the stability of magnetic skyrmions. © 2021 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH
- ItemTransition to the quantum hall regime in InAs nanowire cross-junctions(Bristol : IOP Publ., 2019) Gooth, Johannes; Borg, Mattias; Schmid, Heinz; Bologna, Nicolas; Rossell, Marta D.; Wirths, Stephan; Moselund, Kirsten; Nielsch, Kornelius; Riel, HeikeWe present a low-temperature electrical transport study on four-terminal ballistic InAs nanowire cross-junctions in magnetic fields aligned perpendicular to the cross-plane. Two-terminal longitudinal conductance measurements between opposing contact terminals reveal typical 1D conductance quantization at zero magnetic field. As the magnetic field is applied, the 1D bands evolve into hybrid magneto-electric sub-levels that eventually transform into Landau levels for the widest nanowire devices investigated (width = 100 nm). Hall measurements in a four-terminal configuration on these devices show plateaus in the transverse Hall resistance at high magnetic fields that scale with (ve 2 /h) -1 . e is the elementary charge, h denotes Planck's constant and v is an integer that coincides with the Landau level index determined from the longitudinal conductance measurements. While the 1D conductance quantization in zero magnetic field is fragile against disorder at the NW surface, the plateaus in the Hall resistance at high fields remain robust as expected for a topologically protected Quantum Hall phase. © 2019 IOP Publishing Ltd.