10 results
Search Results
Now showing 1 - 10 of 10
- ItemMUSE crowded field 3D spectroscopy in NGC 300: III. Characterizing extremely faint HII regions and diffuse ionized gas(Les Ulis : EDP Sciences, 2022) Micheva, Genoveva; Roth, Martin M.; Weilbacher, Peter M.; Morisset, Christophe; Castro, Norberto; Monreal Ibero, Ana; Soemitro, Azlizan A.; Maseda, Michael V.; Steinmetz, Matthias; Brinchmann, JarleContext. There are known differences between the physical properties of H II and diffuse ionized gas (DIG). However, most of the studied regions in the literature are relatively bright, with log10 L(Hα)[erg s-1] ≳37. Aims. We compiled an extremely faint sample of 390 H II regions with a median Hα luminosity of 34.7 in the flocculent spiral galaxy NGC 300, derived their physical properties in terms of metallicity, density, extinction, and kinematics, and performed a comparative analysis of the properties of the DIG. Methods. We used MUSE data of nine fields in NGC 300, covering a galactocentric distance of zero to ~450 arcsec (~4 projected kpc), including spiral arm and inter-arm regions. We binned the data in dendrogram leaves and extracted all strong nebular emission lines. We identified H II and DIG regions and compared their electron densities, metallicity, extinction, and kinematic properties. We also tested the effectiveness of unsupervised machine-learning algorithms in distinguishing between the H II and DIG regions. Results. The gas density in the H II and DIG regions is close to the low-density limit in all fields. The average velocity dispersion in the DIG is higher than in the H II regions, which can be explained by the DIG being 1.8 kK hotter than H II gas. The DIG manifests a lower ionization parameter than H II gas, and the DIG fractions vary between 15-77%, with strong evidence of a contribution by hot low-mass evolved stars and shocks to the DIG ionization. Most of the DIG is consistent with no extinction and an oxygen metallicity that is indistinguishable from that of the H II gas. We observe a flat metallicity profile in the central region of NGC 300, without a sign of a gradient. Conclusions. The differences between extremely faint H II and DIG regions follow the same trends and correlations as their much brighter cousins. Both types of objects are so heterogeneous, however, that the differences within each class are larger than the differences between the two classes.
- ItemMUSE crowded field 3D spectroscopy in NGC 300 : I. First results from central fields(Les Ulis : EDP Sciences, 2018) Roth, Martin M.; Sandin, Christer; Kamann, Sebastian; Husser, Tim-Oliver; Weilbacher, Peter M.; Monreal-Ibero, Ana; Bacon, Roland; den Brok, Mark; Dreizler, Stefan; Kelz, Andreas; Marino, Raffaella Anna; Steinmetz, MatthiasAims. As a new approach to the study of resolved stellar populations in nearby galaxies, our goal is to demonstrate with a pilot study in NGC 300 that integral field spectroscopy with high spatial resolution and excellent seeing conditions reaches an unprecedented depth in severely crowded fields. Methods. Observations by MUSE with seven pointings in NGC 300 have resulted in data cubes that are analyzed in four ways: (1) Point spread function-fitting 3D spectroscopy with PampelMUSE, as already successfully pioneered in globular clusters, yields de-blended spectra of individually distinguishable stars, thus providing a complete inventory of blue and red supergiants, and asymptotic giant branch (AGB) stars of type M and C. The technique is also applicable to emission line point sources and provides samples of planetary nebulae (PNe) that are complete down to m5007 = 28. (2) Pseudo-monochromatic images, created at the wavelengths of the most important emission lines and corrected for continuum light with the P3D visualization tool, provide maps of HâII regions, supernova remnants (SNR), and the diffuse interstellar medium (ISM) at a high level of sensitivity, where also faint point sources stand out and allow for the discovery of PNe, Wolf-Rayet (WR) stars, etc. (3) The use of the P3D line-fitting tool yields emission line fluxes, surface brightness, and kinematic information for gaseous objects, corrected for absorption line profiles of the underlying stellar population in the case of Hα. (4) Visual inspection of the data cubes by browsing through the row-stacked spectra image in P3D is demonstrated to be efficient for data mining and the discovery of background galaxies and unusual objects. Results. We present a catalog of luminous stars, rare stars such as WR, and other emission line stars, carbon stars, symbiotic star candidates, PNe, HâII regions, SNR, giant shells, peculiar diffuse and filamentary emission line objects, and background galaxies, along with their spectra. Conclusions. The technique of crowded-field 3D spectroscopy, using the PampelMUSE code, is capable of deblending individual bright stars, the unresolved background of faint stars, gaseous nebulae, and the diffuse component of the ISM, resulting in unprecedented legacy value for observations of nearby galaxies with MUSE.
- ItemUltrafast imaging Raman spectroscopy of large-area samples without stepwise scanning(Göttingen : Copernicus Publ., 2016) Schmälzlin, Elmar; Moralejo, Benito; Bodenmüller, Daniel; Darvin, Maxim E.; Thiede, Gisela; Roth, Martin M.Step-by-step, time-consuming scanning of the sample is still the state-of-the-art in imaging Raman spectroscopy. Even for a few 100 image points the measurement time may add up to minutes or hours. A radical decrease in measurement time can be achieved by applying multiplex spectrographs coupled to imaging fiber bundles that are successfully used in astronomy. For optimal use of the scarce and expensive observation time at astronomical observatories, special high-performance spectrograph systems were developed. They are designed for recording thousands of spatially resolved spectra of a two-dimensional image field within one single exposure. Transferring this technology to imaging Raman spectroscopy allows a considerably faster acquisition of chemical maps. Currently, an imaging field of up to 1 cm2 can be investigated. For porcine skin the required measurement time is less than 1 min. For this reason, this technique is of particular interest for medical diagnostics, e.g., the identification of potentially cancerous abnormalities of skin tissue.
- ItemUltrafast laser inscription of asymmetric integrated waveguide 3 dB couplers for astronomical K-band interferometry at the CHARA array(Washington, DC : Soc., 2021) Benoît, Aurélien; Pike, Fraser A.; Sharma, Tarun K.; MacLachlan, David G.; Dinkelaker, Aline N.; Nayak, Abani S.; Madhav, Kalaga; Roth, Martin M.; Labadie, Lucas; Pedretti, Ettore; Brummelaar, Theo A. ten; Scott, Nic; Coudé du Foresto, Vincent; Thomson, Robert R.We present the fabrication and characterization of 3 dB asymmetric directional couplers for the astronomical K-band at wavelengths between 2.0 and 2.4 µm. The couplers were fabricated in commercial Infrasil silica glass using an ultrafast laser operating at 1030 nm. After optimizing the fabrication parameters, the insertion losses of straight single-mode waveguides were measured to be ∼1.2±0.5dB across the full K-band. We investigate the development of asymmetric 3 dB directional couplers by varying the coupler interaction lengths and by varying the width of one of the waveguide cores to detune the propagation constants of the coupled modes. In this manner, we demonstrate that ultrafast laser inscription is capable of fabricating asymmetric 3 dB directional couplers for future applications in K-band stellar interferometry. Finally, we demonstrate that our couplers exhibit an interferometric fringe contrast of >90%. This technology paves the path for the development of a two-telescope K-band integrated optic beam combiner for interferometry to replace the existing beam combiner (MONA) in Jouvence of the Fiber Linked Unit for Recombination (JouFLU) at the Center for High Angular Resolution Astronomy (CHARA) telescope array.
- ItemDesign, simulation and characterization of integrated photonic spectrographs for astronomy: generation-I AWG devices based on canonical layouts(Washington, DC : Soc., 2021) Stoll, Andreas; Madhav, Kalaga V.; Roth, Martin M.We present an experimental study on our first generation of custom-developed arrayed waveguide gratings (AWG) on a silica platform for spectroscopic applications in near-infrared astronomy. We provide a comprehensive description of the design, numerical simulation and characterization of several AWG devices aimed at spectral resolving powers of 15,000-60,000 in the astronomical H-band. We evaluate the spectral characteristics of the fabricated devices in terms of insertion loss and estimated spectral resolving power and compare the results with numerical simulations. We estimate resolving powers of up to 18,900 from the output channel 3-dB transmission bandwidth. Based on the first characterization results, we select two candidate AWGs for further processing by removal of the output waveguide array and polishing the output facet to optical quality with the goal of integration as the primary diffractive element in a cross-dispersed spectrograph. We further study the imaging properties of the processed AWGs with regards to spectral resolution in direct imaging mode, geometry-related defocus aberration, and polarization sensitivity of the spectral image. We identify phase error control, birefringence control, and aberration suppression as the three key areas of future research and development in the field of high-resolution AWG-based spectroscopy in astronomy.
- ItemFirst stellar photons for an integrated optics discrete beam combiner at the William Herschel Telescope(Washington, DC : The Optical Society, 2021) Nayak, Abani Shankar; Labadie, Lucas; Sharma, Tarun Kumar; Piacentini, Simone; Corrielli, Giacomo; Osellame, Roberto; Gendron, Éric; Buey, Jean-Tristan M.; Chemla, Fanny; Cohen, Mathieu; Bharmal, Nazim A.; Bardou, Lisa F.; Staykov, Lazar; Osborn, James; Morris, Timothy J.; Pedretti, Ettore; Dinkelaker, Aline N.; Madhav, Kalaga V.; Roth, Martin M.We present the first on-sky results of a four-telescope integrated optics discrete beam combiner (DBC) tested at the 4.2mWilliamHerschel Telescope. The device consists of a four-input pupil remapper followed by a DBC and a 23-output reformatter. The whole device was written monolithically in a single alumino-borosilicate substrate using ultrafast laser inscription. The device was operated at astronomical H-band (1.6 μm), and a deformable mirror along with a microlens array was used to inject stellar photons into the device. We report the measured visibility amplitudes and closure phases obtained on Vega and Altair that are retrieved using the calibrated transfer matrix of the device. While the coherence function can be reconstructed, the on-sky results show significant dispersion from the expected values. Based on the analysis of comparable simulations, we find that such dispersion is largely caused by the limited signal-to-noise ratio of our observations. This constitutes a first step toward an improved validation of theDBCas a possible beam combination scheme for long-baseline interferometry. © 2021 Optical Society of America.
- ItemResolving stellar populations with integral field spectroscopy(Berlin : Wiley-VCH Verl., 2019) Roth, Martin M.; Weilbacher, Peter M.; Castro, NorbertoHigh-performance instruments at large ground-based telescopes have made integral field spectroscopy (IFS) a powerful tool for the study of extended objects such as galaxies, nebulae, or even larger survey fields on the sky. Here, we discuss the capabilities of IFS for the study of resolved stellar populations, using the newmethod of point-spread-function-fitting crowded field IFS, analogous to the well-established technique of crowded field photometry with image sensors.We review early pioneering work with first-generation integral field spectrographs, the breakthrough achieved with the multiunit spectral explorer (MUSE) instrument at the European Organisation for Astronomical Research in the Southern Hemisphere (ESO)Very Large Telescope, the remarkable progress accomplished with MUSE in the study of globular clusters, and first results on nearby galaxies. We discuss the synergy of integral field spectrographs at 8–10 mclass telescopes with future facilities such as the extremely large telescope (ELT).
- ItemPhotonic lanterns: a practical guide to filament tapering(Washington, DC : OSA, 2021) Davenport, John J.; Diab, Momen; Deka, Pranab J.; Tripathi, Aashana; Madhav, Kalaga; Roth, Martin M.We present a detailed method of tapering and drawing photonic lanterns using a filament glass processing system. Single-mode fibers (SMFs) were stacked inside a low refractive index, fluorine-doped capillary, which was then heated and tapered to produce a transition from single-mode to multi-mode. Fabrication parameters were considered in four categories: method of preparation and stacking of SMFs into a capillary, heat and filament dimensions of the glass processor, capillary ID, and the use of vacuum during tapering. 19- and 37- fiber lanterns were drawn, demonstrating good fusion between SMF claddings, a clear differentiation between core and cladding in the multimode (MM) section, and well-ordered arrangements between SMFs, which is controlled during the tapering process. The transmission efficiency of a 19-fiber photonic lantern, compared to an MMF with the same core diameter and NA, has a relative transmission efficiency of 1.19 dB or 67.1%. The steps and parameters provided in this paper form a framework for fabricating quality photonic lanterns.
- ItemThe HETDEX Instrumentation: Hobby-Eberly Telescope Wide-field Upgrade and VIRUS(London : Institute of Physics Publ., 2021) Hill, Gary J.; Lee, Hanshin; MacQueen, Phillip J.; Kelz, Andreas; Drory, Niv; Vattiat, Brian L.; Good, John M.; Ramsey, Jason; Kriel, Herman; Peterson, Trent; DePoy, D. L.; Gebhardt, Karl; Marshall, J. L.; Tuttle, Sarah E.; Bauer, Svend M.; Chonis, Taylor S.; Fabricius, Maximilian H.; Froning, Cynthia; Häuser, Marco; Indahl, Briana L.; Jahn, Thomas; Landriau, Martin; Leck, Ron; Montesano, Francesco; Prochaska, Travis; Snigula, Jan M.; Zeimann, Greg; Bryant, Randy; Damm, George; Fowler, J. R.; Janowiecki, Steven; Martin, Jerry; Mrozinski, Emily; Odewahn, Stephen; Rostopchin, Sergey; Shetrone, Matthew; Spencer, Renny; Mentuch Cooper, Erin; Armandroff, Taft; Bender, Ralf; Dalton, Gavin; Hopp, Ulrich; Komatsu, Eiichiro; Nicklas, Harald; Ramsey, Lawrence W.; Roth, Martin M.; Schneider, Donald P.; Sneden, Chris; Steinmetz, MatthiasThe Hobby-Eberly Telescope (HET) Dark Energy Experiment (HETDEX) is undertaking a blind wide-field low-resolution spectroscopic survey of 540 deg2 of sky to identify and derive redshifts for a million Lyα-emitting galaxies in the redshift range 1.9 < z < 3.5. The ultimate goal is to measure the expansion rate of the universe at this epoch, to sharply constrain cosmological parameters and thus the nature of dark energy. A major multiyear Wide-Field Upgrade (WFU) of the HET was completed in 2016 that substantially increased the field of view to 22′ diameter and the pupil to 10 m, by replacing the optical corrector, tracker, and Prime Focus Instrument Package and by developing a new telescope control system. The new, wide-field HET now feeds the Visible Integral-field Replicable Unit Spectrograph (VIRUS), a new low-resolution integral-field spectrograph (LRS2), and the Habitable Zone Planet Finder, a precision near-infrared radial velocity spectrograph. VIRUS consists of 156 identical spectrographs fed by almost 35,000 fibers in 78 integral-field units arrayed at the focus of the upgraded HET. VIRUS operates in a bandpass of 3500-5500 Å with resolving power R ≃ 800. VIRUS is the first example of large-scale replication applied to instrumentation in optical astronomy to achieve spectroscopic surveys of very large areas of sky. This paper presents technical details of the HET WFU and VIRUS, as flowed down from the HETDEX science requirements, along with experience from commissioning this major telescope upgrade and the innovative instrumentation suite for HETDEX.
- ItemFiber Vector Bend Sensor Based on Multimode Interference and Image Tapping(Basel : MDPI, 2019) Zhang, Ziyang; Rahman, Aashia; Fiebrandt, Julia; Wang, Yu; Sun, Kai; Luo, Jiajun; Madhav, Kalaga; Roth, Martin M.A grating-less fiber vector bend sensor is demonstrated using a standard single mode fiber spliced to a multimode fiber as a multimode interference device. The ring-shaped light intensity distribution at the end of the multimode fiber is subject to a vector transition in response to the fiber bend. Instead of comprehensive imaging processing for the analysis, the image can be tapped out by a seven-core fiber spliced to the other end of the multimode fiber. The seven-core fiber is further guided to seven single mode fibers via a commercial fan-out device. By comparing the relative light intensities received at the seven outputs, both the bend radius and its direction can be determined. Experiment has shown that a slight bend displacement of 10 µm over a 1.2-cm-long multimode fiber in the X direction (bend angle of 0.382 ◦ ) causes a distinctive power imbalance of 4.6 dB between two chosen outputs (numbered C4 and C7). For the same displacement in the Y direction, the power ratio between the previous two outputs C4 and C7 remains constant, while the imbalance between another pair (C3 and C4) rises significantly to 7.0 dB. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.