14 results
Search Results
Now showing 1 - 10 of 14
- ItemThermoelectric Characterization Platform for Electrochemically Deposited Materials(Weinheim : Wiley-VCH Verlag GmbH & Co. KG, 2020) Barati, Vida; Garcia Fernandez, Javier; Geishendorf, Kevin; Schnatmann, Lauritz Ule; Lammel, Michaela; Kunzmann, Alexander; Pérez, Nicolás; Li, Guodong; Schierning, Gabi; Nielsch, Kornelius; Reith, HeikoSuccessful optimization of the thermoelectric (TE) performance of materials, described by the figure of merit zT, is a key enabler for its application in energy harvesting or Peltier cooling devices. While the zT value of bulk materials is accessible by a variety of commercial measurement setups, precise determination of the zT value for thin and thick films remains a great challenge. This is particularly relevant for films synthesized by electrochemical deposition, where the TE material is deposited onto an electrically conductive seed layer causing an in-plane short circuit. Therefore, a platform for full in-plane zT characterization of electrochemically deposited TE materials is developed, eliminating the impact of the electrically conducting seed layer. The characterization is done using a suspended TE material within a transport device which was prepared by photolithography in combination with chemical etching steps. An analytical model to determine the thermal conductivity is developed and the results verified using finite element simulations. Taken together, the full in-plane zT characterization provides an inevitable milestone for material optimization under realistic conditions in TE devices. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- ItemTransparent Power-Generating Windows Based on Solar-Thermal-Electric Conversion(Weinheim : Wiley-VCH, 2021) Zhang, Qihao; Huang, Aibin; Ai, Xin; Liao, Jincheng; Song, Qingfeng; Reith, Heiko; Cao, Xun; Fang, Yueping; Schierning, Gabi; Nielsch, Kornelius; Bai, Shengqiang; Chen, LidongIntegrating transparent solar-harvesting systems into windows can provide renewable on-site energy supply without altering building aesthetics or imposing further design constraints. Transparent photovoltaics have shown great potential, but the increased transparency comes at the expense of reduced power-conversion efficiency. Here, a new technology that overcomes this limitation by combining solar-thermal-electric conversion with a material's wavelength-selective absorption is presented. A wavelength-selective film consisting of Cs0.33WO3 and resin facilitates high visible-light transmittance (up to 88%) and outstanding ultraviolet and infrared absorbance, thereby converting absorbed light into heat without sacrificing transparency. A prototype that couples the film with thermoelectric power generation produces an extraordinary output voltage of ≈4 V within an area of 0.01 m2 exposed to sunshine. Further optimization design and experimental verification demonstrate high conversion efficiency comparable to state-of-the-art transparent photovoltaics, enriching the library of on-site energy-saving and transparent power generation.
- ItemInfluence of Nanoparticle Processing on the Thermoelectric Properties of (BixSb1−X)2Te3 Ternary Alloys(Weinheim : Wiley-VCH, 2021) Salloum, Sarah; Bendt, Georg; Heidelmann, Markus; Loza, Kateryna; Bayesteh, Samaneh; Izadi, M. Sepideh; Patrick, Kawulok; He, Ran; Schlörb, Heike; Perez, Nicolas; Reith, Heiko; Nielsch, Kornelius; Schierning, Gabi; Schulz, StephanThe synthesis of phase‐pure ternary solutions of tetradymite‐type materials (BixSb1−x)2Te3 (x=0.25; 0.50; 0.75) in an ionic liquid approach has been carried out. The nanoparticles are characterized by means of energy‐dispersive X‐ray spectroscopy (EDX), powder X‐ray diffraction (PXRD), scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the role of different processing approaches on the thermoelectric properties ‐ Seebeck coefficient as well as electrical and thermal conductivity ‐ is demonstrated.
- ItemImproving the zT value of thermoelectrics by nanostructuring: Tuning the nanoparticle morphology of Sb2Te3 by using ionic liquids(Cambridge : Royal Society of Chemistry, 2016) Schaumann, Julian; Loor, Manuel; Ünal, Derya; Mudring, Anja; Heimann, Stefan; Hagemann, Ulrich; Schulz, Stephan; Maculewicz, Franziska; Schierning, GabiA systematic study on the microwave-assisted thermolysis of the single source precursor (Et2Sb)2Te (1) in different asymmetric 1-alkyl-3-methylimidazolium- and symmetric 1,3-dialkylimidazolium-based ionic liquids (ILs) reveals the distinctive role of both the anion and the cation in tuning the morphology and microstructure of the resulting Sb2Te3 nanoparticles as evidenced by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy (XPS). A comparison of the electrical and thermal conductivities as well as the Seebeck coefficient of the Sb2Te3 nanoparticles obtained from different ILs reveals the strong influence of the specific IL, from which C4mimI was identified as the best solvent, on the thermoelectric properties of as-prepared nanosized Sb2Te3. This work provides design guidelines for ILs, which allow the synthesis of nanostructured thermoelectrics with improved performances.
- ItemEuropium Clustering and Glassy Magnetic Behavior in Inorganic Clathrate-VIII Eu8Ga16Ge30(Basel : MDPI, 2022) Pérez, Nicolás; Sahoo, Manaswini; Schierning, Gabi; Nielsch, Kornelius; Nolas, George S.The temperature- and field-dependent, electrical and thermal properties of inorganic clathrate-VIII Eu8Ga16Ge30 were investigated. The type VIII clathrates were obtained from the melt of elements as reported previously. Specifically, the electrical resistivity data show hysteretic magnetoresistance at low temperatures, and the Seebeck coefficient and Hall data indicate magnetic interactions that affect the electronic structure in this material. Heat capacity and thermal conductivity data corroborate these findings and reveal the complex behavior due to Eu2+ magnetic ordering and clustering from approximately 13 to 4 K. Moreover, the low-frequency dynamic response indicates Eu8Ga16Ge30 to be a glassy magnetic system. In addition to advancing our fundamental understanding of the physical properties of this material, our results can be used to further the research for potential applications of interest in the fields of magnetocalorics or thermoelectrics.
- ItemUnveiling the phonon scattering mechanisms in half-Heusler thermoelectric compounds(Cambridge : RSC Publ., 2020) He, Ran; Zhu, Taishan; Wang, Yumei; Wolff, Ulrike; Jaud, Jean-Christophe; Sotnikov, Andrei; Potapov, Pavel; Wolf, Daniel; Ying, Pingjun; Wood, Max; Liu, Zhenhui; Feng, Le; Perez Rodriguez, Nicolas; Snyder, G. Jeffrey; Grossman, Jeffrey C.; Nielsch, Kornelius; Schierning, GabiHalf-Heusler (HH) compounds are among the most promising thermoelectric (TE) materials for large-scale applications due to their superior properties such as high power factor, excellent mechanical and thermal reliability, and non-toxicity. Their only drawback is the remaining-high lattice thermal conductivity. Various mechanisms were reported with claimed effectiveness to enhance the phonon scattering of HH compounds including grain-boundary scattering, phase separation, and electron–phonon interaction. In this work, however, we show that point-defect scattering has been the dominant mechanism for phonon scattering other than the intrinsic phonon–phonon interaction for ZrCoSb and possibly many other HH compounds. Induced by the charge-compensation effect, the formation of Co/4d Frenkel point defects is responsible for the drastic reduction of lattice thermal conductivity in ZrCoSb1−xSnx. Our work systematically depicts the phonon scattering profile of HH compounds and illuminates subsequent material optimizations.
- ItemSignatures of a Charge Density Wave Phase and the Chiral Anomaly in the Fermionic Material Cobalt Monosilicide CoSi(Weinheim : Wiley-VCH Verlag GmbH & Co. KG, 2020) Schnatmann, Lauritz; Geishendorf, Kevin; Lammel, Michaela; Damm, Christine; Novikov, Sergey; Thomas, Andy; Burkov, Alexander; Reith, Heiko; Nielsch, Kornelius; Schierning, GabiMaterials with topological electronic states have emerged as one of the most exciting discoveries of condensed quantum matter, hosting quasiparticles with extremely low effective mass and high mobility. Weyl materials contain such topological states in the bulk and additionally have a non-trivial chiral charge. However, despite known quantum effects caused by these chiral states, the interplay between chiral states, and a charge density wave phase, an ordering of the electrons to a correlated phase is not experimentally explored. Indications for the formation of a charge density wave phase in the Weyl material cobalt monosilicide CoSi are observed. Furthermore, the typical signatures of the charge density wave phase together with typical signatures of Weyl fermions in magnetic field dependent electrical transport characterization are investigated. The charge density wave and the chiral contribution to the electrical magneto-transport are separated as well as a suppression of the charge density wave phase is observed in magnetic fields. © 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
- ItemWaste Recycling in Thermoelectric Materials(Weinheim : Wiley-VCH, 2020) Bahrami, Amin; Schierning, Gabi; Nielsch, KorneliusThermoelectric (TE) technology enables the efficient conversion of waste heat generated in homes, transport, and industry into promptly accessible electrical energy. Such technology is thus finding increasing applications given the focus on alternative sources of energy. However, the synthesis of TE materials relies on costly and scarce elements, which are also environmentally damaging to extract. Moreover, spent TE modules lead to a waste of resources and cause severe pollution. To address these issues, many laboratory studies have explored the synthesis of TE materials using wastes and the recovery of scarce elements from spent modules, e.g., utilization of Si slurry as starting materials, development of biodegradable TE papers, and bacterial recovery and recycling of tellurium from spent TE modules. Yet, the outcomes of such work have not triggered sustainable industrial practices to the extent needed. This paper provides a systematic overview of the state of the art with a view to uncovering the opportunities and challenges for expanded application. Based on this overview, it explores a framework for synthesizing TE materials from waste sources with efficiencies comparable to those made from raw materials.
- ItemDoping High-Mobility Donor : Acceptor Copolymer Semiconductors with an Organic Salt for High-Performance Thermoelectric Materials(Weinheim : Wiley-VCH Verlag GmbH & Co. KG, 2020) Guo, Jing; Li, Guodong; Reith, Heiko; Jiang, Lang; Wang, Ming; Li, Yuhao; Wang, Xinhao; Zeng, Zebing; Zhao, Huaizhou; Lu, Xinhui; Schierning, Gabi; Nielsch, Kornelius; Liao, Lei; Hu, YuanyuanOrganic semiconductors (OSCs) are attractive for fabrication of thermoelectric devices with low cost, large area, low toxicity, and high flexibility. In order to achieve high-performance organic thermoelectric devices (OTEs), it is essential to develop OSCs with high conductivity (σ), large Seebeck coefficient (S), and low thermal conductivity (κ). It is equally important to explore efficient dopants matching the need of thermoelectric devices. The thermoelectric performance of a high-mobility donor–acceptor (D–A) polymer semiconductor, which is doped by an organic salt, is studied. Both a high p-type electrical conductivity approaching 4 S cm−1 and an excellent power factor (PF) of 7 µW K−2 m−1 are obtained, which are among the highest reported values for polymer semiconductors. Temperature-dependent conductivity, Seebeck coefficient and power factor of the doped materials are systematically investigated. Detailed analysis on the results of thermoelectric measurements has revealed a hopping transport in the materials, which verifies the empirical relationship: S ∝ σ−1/4 and PF ∝ σ1/2. The results demonstrate that D–A copolymer semiconductors with proper combination of dopants have great potential for fabricating high-performance thermoelectric devices. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- ItemTowards tellurium-free thermoelectric modules for power generation from low-grade heat(London : Nature Publishing Group, 2021) Ying, Pingjun; He, Ran; Mao, Jun; Zhang, Qihao; Reith, Heiko; Sui, Jiehe; Ren, Zhifeng; Nielsch, Kornelius; Schierning, GabiThermoelectric technology converts heat into electricity directly and is a promising source of clean electricity. Commercial thermoelectric modules have relied on Bi2Te3-based compounds because of their unparalleled thermoelectric properties at temperatures associated with low-grade heat (<550 K). However, the scarcity of elemental Te greatly limits the applicability of such modules. Here we report the performance of thermoelectric modules assembled from Bi2Te3-substitute compounds, including p-type MgAgSb and n-type Mg3(Sb,Bi)2, by using a simple, versatile, and thus scalable processing routine. For a temperature difference of ~250 K, whereas a single-stage module displayed a conversion efficiency of ~6.5%, a module using segmented n-type legs displayed a record efficiency of ~7.0% that is comparable to the state-of-the-art Bi2Te3-based thermoelectric modules. Our work demonstrates the feasibility and scalability of high-performance thermoelectric modules based on sustainable elements for recovering low-grade heat.