2 results
Search Results
Now showing 1 - 2 of 2
- ItemHow activated carbon improves the performance of non-thermal plasma removing methyl ethyl ketone from a gas stream([Amsterdam] : Elsevier B.V., 2021) Schmidt, Michael; Kettlitz, Manfred; Kolb, Juergen F.The combination of non-thermal plasma (NTP), operated at room temperature and at atmospheric pressure in air and in combination with activated carbon filters offers a more efficient removal of VOCs from gas streams than each individual method alone. Efficiencies, synergies and mechanisms of this combination were investigated by means of comprehensive quantitative Fourier transform infrared spectroscopy analysis. Therefore, dry and wet synthetic air containing about 90 ppm of methyl ethyl ketone (MEK) were treated with non-thermal plasma (NTP) and an intentionally undersized activated carbon (AC) filter, separately and in combination. As a result, removal of about 50 % was achieved for NTP or AC alone but a removal close to 95 % was found for the combination. Ozone, generated by the NTP, was reduced by 55 % with the AC-filter. For the operation of the NTP with humid air, a decomposition of the pollutant on AC was observed even after the plasma was switched off.
- ItemStudies on the Electrical Behaviour and Removal of Toluene with a Dielectric Barrier Discharge(Berlin : de Gruyter, 2014) Schmidt, Michael; Schiorlin, Milko; Brandenburg, RonnyThis contribution attempts to establish an easy-to-apply non-thermal plasma reactor for efficient toluene removal. Derived from the already established knowledge of the so called Dielectric Barrier Discharge (DBD) Stack Reactor a new model reactor was used in this work. The DBD Stack Reactor is a multi-elements reactor but in this work only one stack element was used to investigate the efficiency and efficacy of toluene removal. In case of reliable results the scalability process for industrial application is already well known. Therefore, laboratory experiments were conducted in dry and wet synthetic air with an admixture of 50 ppm toluene. Along with the toluene removal process the electrical behaviour of the discharge configuration was investigated. It was found that the electrical capacitance of the dielectric barrier changes with variations of the operating voltage. This could be due to the changes in the area of the dielectric barrier which is covered with plasma. Additionally, it was found that the power input into the plasma, at a fixed operating voltage, is proportional to the frequency, which is in agreement with the literature.Regarding the decomposition process, the total removal of toluene was achieved at specific input energy densities of 55 J L-1 under dry conditions and 110 J L-1 under wet conditions. The toluene removal was accompanied by the production of nitric acid (dry conditions) and formic acid (wet conditions). The latter suggested a combination of the plasma reactor with a water scrubber as an approach for total removal of pollutant molecules.