23 results
Search Results
Now showing 1 - 10 of 23
- ItemTopological transitions in superconductor nanomembranes under a strong transport current(Washington, D.C. : American Association for the Advancement of Science, 2020) Rezaev, R.O.; Smirnova, E.I.; Schmidt, O.G.; Fomin, M.The topological defects, vortices in bulk superconductors (SCs) and phase slips in low-dimensional SCs are known to lead to the occurrence of a finite resistance. We report on a topological transition between the both types of topological defects under a strong transport current in an open SC nanotube with a submicron-scale inhomogeneity of the normal-to-the-surface component of the applied magnetic field. When the magnetic field is orthogonal to the axis of the nanotube, which carries the transport current in the azimuthal direction, the phase-slip regime is characterized by the vortex/antivortex lifetime ∼ 10−14 s versus the vortex lifetime ∼ 10−11 s for vortex chains in the half-tubes, and the induced voltage shows a pulse as a function of the magnetic field. The topological transition between the vortex-chain and phase-slip regimes determines the magnetic-field–voltage and current–voltage characteristics of curved SC nanomembranes to pursue high-performance applications in advanced electronics and quantum computing.
- ItemTuning emission energy and fine structure splitting in quantum dots emitting in the telecom O-band(College Park, MD : American Institute of Physics, 2019) Höfer, B.; Olbrich, F.; Kettler, J.; Paul, M.; Höschele, J.; Jetter, M.; Portalupi, S.L.; Ding, F.; Michler, P.; Schmidt, O.G.We report on optical investigations of MOVPE-grown InGaAs/GaAs quantum dots emitting at the telecom O-band that were integrated onto uniaxial piezoelectric actuators. This promising technique, which does not degrade the emission brightness of the quantum emitters, enables us to tune the quantum dot emission wavelengths and their fine-structure splitting. By spectrally analyzing the emitted light with respect to its polarization, we are able to demonstrate the cancelation of the fine structure splitting within the experimental resolution limit. This work represents an important step towards the high-yield generation of entangled photon pairs at telecommunication wavelength, together with the capability to precisely tune the emission to target wavelengths.
- ItemTemperature-dependent Raman investigation of rolled up InGaAs/GaAs microtubes(New York, NY [u.a.] : Springer, 2012) Rodriguez, R.D.; Sheremet, E.; Thurmer, D.J.; Lehmann, D.; Gordan, O.D.; Seidel, F.; Milekhin, A.; Schmidt, O.G.; Hietschold, M.; Zahn, D.R.T.Large arrays of multifunctional rolled-up semiconductors can be mass-produced with precisely controlled size and composition, making them of great technological interest for micro- and nano-scale device fabrication. The microtube behavior at different temperatures is a key factor towards further engineering their functionality, as well as for characterizing strain, defects, and temperature-dependent properties of the structures. For this purpose, we probe optical phonons of GaAs/InGaAs rolled-up microtubes using Raman spectroscopy on defect-rich (faulty) and defect-free microtubes. The microtubes are fabricated by selectively etching an AlAs sacrificial layer in order to release the strained InGaAs/GaAs bilayer, all grown by molecular beam epitaxy. Pristine microtubes show homogeneity of the GaAs and InGaAs peak positions and intensities along the tube, which indicates a defect-free rolling up process, while for a cone-like microtube, a downward shift of the GaAs LO phonon peak along the cone is observed. Formation of other type of defects, including partially unfolded microtubes, can also be related to a high Raman intensity of the TO phonon in GaAs. We argue that the appearance of the TO phonon mode is a consequence of further relaxation of the selection rules due to the defects on the tubes, which makes this phonon useful for failure detection/prediction in such rolled up systems. In order to systematically characterize the temperature stability of the rolled up microtubes, Raman spectra were acquired as a function of sample temperature up to 300°C. The reversibility of the changes in the Raman spectra of the tubes within this temperature range is demonstrated.
- ItemTriggered polarization-entangled photon pairs from a single quantum dot up to 30 K(College Park, MD : Institute of Physics Publishing, 2007) Hafenbrak, R.; Ulrich, S.M.; Michler, P.; Wang, L.; Rastelli, A.; Schmidt, O.G.The radiative biexciton-exciton decay in a semiconductor quantum dot (QD) has the potential of being a source of triggered polarization-entangled photon pairs. However, in most cases the anisotropy-induced exciton fine structure splitting destroys this entanglement. Here, we present measurements on improved QD structures, providing both significantly reduced inhomogeneous emission linewidths and near-zero fine structure splittings. A high-resolution detection technique is introduced which allows us to accurately determine the fine structure in the photoluminescence emission and therefore select appropriate QDs for quantum state tomography. We were able to verify the conditions of entangled or classically correlated photon pairs in full consistence with observed fine structure properties. Furthermore, we demonstrate reliable polarization-entanglement for elevated temperatures up to 30 K. The fidelity of the maximally entangled state decreases only a little from 72% at 4 K to 68% at 30 K. This is especially encouraging for future implementations in practical devices. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft.
- ItemSlow and fast single photons from a quantum dot interacting with the excited state hyperfine structure of the Cesium D1-line(London : Nature Publishing Group, 2019) Kroh, T.; Wolters, J.; Ahlrichs, A.; Schell, A.W.; Thoma, A.; Reitzenstein, S.; Wildmann, J.S.; Zallo, E.; Trotta, R.; Rastelli, A.; Schmidt, O.G.; Benson, O.Hybrid interfaces between distinct quantum systems play a major role in the implementation of quantum networks. Quantum states have to be stored in memories to synchronize the photon arrival times for entanglement swapping by projective measurements in quantum repeaters or for entanglement purification. Here, we analyze the distortion of a single-photon wave packet propagating through a dispersive and absorptive medium with high spectral resolution. Single photons are generated from a single In(Ga)As quantum dot with its excitonic transition precisely set relative to the Cesium D1 transition. The delay of spectral components of the single-photon wave packet with almost Fourier-limited width is investigated in detail with a 200 MHz narrow-band monolithic Fabry-Pérot resonator. Reflecting the excited state hyperfine structure of Cesium, “slow light” and “fast light” behavior is observed. As a step towards room-temperature alkali vapor memories, quantum dot photons are delayed for 5 ns by strong dispersion between the two 1.17 GHz hyperfine-split excited state transitions. Based on optical pumping on the hyperfine-split ground states, we propose a simple, all-optically controllable delay for synchronization of heralded narrow-band photons in a quantum network.
- ItemTowards deterministically controlled InGaAs/GaAs lateral quantum dot molecules(College Park, MD : Institute of Physics Publishing, 2008) Wang, L.; Rastelli, A.; Kiravittaya, S.; Atkinson, P.; Ding, F.; Bof Bufon, C.C.; Hermannstädter, C.; Witzany, M.; Beirne, G.J.; Michler, P.; Schmidt, O.G.We report on the fabrication, detailed characterization and modeling of lateral InGaAs quantum dot molecules (QDMs) embedded in a GaAs matrix and we discuss strategies to fully control their spatial configuration and electronic properties. The three-dimensional morphology of encapsulated QDMs was revealed by selective wet chemical etching of the GaAs top capping layer and subsequent imaging by atomic force microscopy (AFM). The AFM investigation showed that different overgrowth procedures have a profound consequence on the QDM height and shape. QDMs partially capped and annealed in situ for micro- photoluminescence spectroscopy consist of shallow but well-defined quantum dots (QDs) in contrast to misleading results usually provided by surface morphology measurements when they are buried by a thin GaAs layer. This uncapping approach is crucial for determining the QDM structural parameters, which are required for modeling the system. A single-band effective-mass approximation is employed to calculate the confined electron and heavy-hole energy levels, taking the geometry and structural information extracted from the uncapping experiments as inputs. The calculated transition energy of the single QDM shows good agreement with the experimentally observed values. By decreasing the edge-to-edge distance between the two QDs within a QDM, a splitting of the electron (hole) wavefunction into symmetric and antisymmetric states is observed, indicating the presence of lateral coupling. Site control of such lateral QDMs obtained by growth on a pre-patterned substrate, combined with a technology to fabricate gate structures at well-defined positions with respect to the QDMs, could lead to deterministically controlled devices based on QDMs. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft.
- ItemDisturbing-free determination of yeast concentration in DI water and in glucose using impedance biochips(Basel : MDPI AG, 2020) Kiani, M.; Du, N.; Vogel, M.; Raff, J.; Hübner, U.; Skorupa, I.; Bürger, D.; Schulz, S.E.; Schmidt, O.G.; Blaschke, D.; Schmidt, H.Deionized water and glucose without yeast and with yeast (Saccharomyces cerevisiae) of optical density OD600 that ranges from 4 to 16 has been put in the ring electrode region of six different types of impedance biochips and impedance has been measured in dependence on the added volume (20, 21, 22, 23, 24, 25 µL). The measured impedance of two out of the six types of biochips is strongly sensitive to the addition of both liquid without yeast and liquid with yeast and modelled impedance reveals a linear relationship between the impedance model parameters and yeast concentration. The presented biochips allow for continuous impedance measurements without interrupting the cultivation of the yeast. A multiparameter fit of the impedance model parameters allows for determining the concentration of yeast (cy) in the range from cy = 3.3 × 107 to cy = 17 × 107 cells/mL. This work shows that independent on the liquid, i.e., DI water or glucose, the impedance model parameters of the two most sensitive types of biochips with liquid without yeast and with liquid with yeast are clearly distinguishable for the two most sensitive types of biochips.
- ItemVectorial nonlinear coherent response of a strongly confined exciton-biexciton system(Bristol : IOP, 2013) Kasprzak, J.; Portolan, S.; Rastelli, A.; Wang, L.; Plumhof, J.D.; Schmidt, O.G.; Langbein, W.The vectorial four-wave mixing response of an individual strongly confined exciton-biexciton system with fine-structure splitting in a GaAs/AlGaAs quantum dot is measured by dual-polarization heterodyne spectral interferometry. The results are compared with theoretical predictions based on the optical Bloch equations. The system is described by a four-level scheme, which is a model system of the nonlinear excitonic response in low-dimensional semiconductors. We measure its coherence properties and determine the underlying dephasing mechanisms. An impact of the inhomogeneous broadening by spectral wandering on the coherent response is investigated. We further discuss the different four-wave mixing pathways, polarization selection rules, the time-resolved polarization state, the vectorial response in two-dimensional four-wave mixing and ensemble properties.
- ItemCoupling a single solid-state quantum emitter to an array of resonant plasmonic antennas(London : Nature Publishing Group, 2018) Pfeiffer, M.; Atkinson, P.; Rastelli, A.; Schmidt, O.G.; Giessen, H.; Lippitz, M.; Lindfors, K.Plasmon resonant arrays or meta-surfaces shape both the incoming optical field and the local density of states for emission processes. They provide large regions of enhanced emission from emitters and greater design flexibility than single nanoantennas. This makes them of great interest for engineering optical absorption and emission. Here we study the coupling of a single quantum emitter, a self-assembled semiconductor quantum dot, to a plasmonic meta-surface. We investigate the influence of the spectral properties of the nanoantennas and the position of the emitter in the unit cell of the structure. We observe a resonant enhancement due to emitter-array coupling in the far-field regime and find a clear difference from the interaction of an emitter with a single antenna.
- ItemSelf-assembly of highly sensitive 3D magnetic field vector angular encoders(Washington : American Association for the Advancement of Science (A A A S), 2019) Becker, C.; Karnaushenko, D.; Kang, T.; Karnaushenko, D.D.; Faghih, M.; Mirhajivarzaneh, A.; Schmidt, O.G.Novel robotic, bioelectronic, and diagnostic systems require a variety of compact and high-performance sensors. Among them, compact three-dimensional (3D) vector angular encoders are required to determine spatial position and orientation in a 3D environment. However, fabrication of 3D vector sensors is a challenging task associated with time-consuming and expensive, sequential processing needed for the orientation of individual sensor elements in 3D space. In this work, we demonstrate the potential of 3D self-assembly to simultaneously reorient numerous giant magnetoresistive (GMR) spin valve sensors for smart fabrication of 3D magnetic angular encoders. During the self-assembly process, the GMR sensors are brought into their desired orthogonal positions within the three Cartesian planes in a simultaneous process that yields monolithic high-performance devices. We fabricated vector angular encoders with equivalent angular accuracy in all directions of 0.14°, as well as low noise and low power consumption during high-speed operation at frequencies up to 1 kHz.
- «
- 1 (current)
- 2
- 3
- »