10 results
Search Results
Now showing 1 - 10 of 10
- ItemDomain evolution during the spin-reorientation transition in epitaxial NdCo5 thin films(Milton Park : Taylor & Francis, 2013) Seifert, M.; Schultz, L.; Schäfer, R.; Neu, V.; Hankemeier, S.; Rössler, S.; Frömter, R.; Oepen, H.P.The domain structure and its changes with temperature were investigated for an epitaxial NdCo5 thin film with in-plane texture in which a spin-reorientation transition takes place from the easy c-axis via the easy cone to the easy plane. Scanning electron microscopy with polarization analysis reveals a transition from a two-domain state at temperatures above 318 K via a four-domain state back to a 90°-rotated two-domain state at temperatures below 252 K. The transition temperatures correspond well to those determined by global magnetization measurements. The magnetization configuration at the three different regimes of magnetic anisotropy and its transition with temperature were analysed in detail. From the local measurements, the spin-reorientation angle and the magnetocrystalline anisotropy constants of first and second order were derived.
- ItemMagnetic field-induced twin boundary motion in polycrystalline Ni-Mn-Ga fibres(Milton Park : Taylor & Francis, 2008) Scheerbaum, N.; Heczko, O.; Liu, J.; Hinz, D.; Schultz, L.; Gutfleisch, O.Magnetic field-induced twin boundary motion leading to large magnetic field-induced strain of ~1.0% was established in polycrystalline Ni50.9Mn27.1Ga22.0 (at.%) fibres at room temperature (~60–100 μm in diameter and ~3 mm in length). The fibres' grains are as large as the fibre diameter and of random orientation. At room temperature, a ferromagnetic 5M martensite is found. Magnetic field-induced twin boundary motion was indicated by magnetic measurements and validated by electron backscatter diffraction (EBSD). The application of a magnetic field shifts the equilibrium temperature of martensite and austenite by ~0.4 K T−1, which agrees with calculations using the Clapeyron–Clausius approach.
- ItemOrbital and spin effects for the upper critical field in As-deficient disordered Fe pnictide superconductors(Milton Park : Taylor & Francis, 2009) Fuchs, G.; Drechsler, S.-L.; Kozlova, N.; Bartkowiak, M.; Hamann-Borrero, J.E.; Behr, G.; Nenkov, K.; Klauss, H.-H.; Maeter, H.; Amato, A.; Luetkens, H.; Kwadrin, A.; Khasanov, R.; Freudenberger, J.; Köhler, A.; Knupfer, M.; Arushanov, E.; Rosner, H.; Büchner, B.; Schultz, L.We report upper critical field Bc2(T) data for LaO0.9F0.1FeAs1- δ in a wide temperature and field range up to 60 T. The large slope of Bc2≈- 5.4 to -6.6 T K-1 near an improved Tc≈28.5 K of the in-plane Bc2(T) contrasts with a flattening starting near 23 K above 30 T we regard as the onset of Pauli-limited behaviour (PLB) with Bc2(0)≈63–68 T. We interpret a similar hitherto unexplained flattening of the Bc2(T) curves reported for at least three other disordered closely related systems, Co-doped BaFe2As2, (Ba,K) Fe2As2 and NdO0.7F0.3FeAs (all single crystals), for applied fields H∥(a,b), also as a manifestation of PLB. Their Maki parameters have been estimated by analysing their Bc2(T) data within the Werthamer–Helfand–Hohenberg approach. The pronounced PLB of (Ba, K)Fe2As2 single crystals obtained from an Sn flux is attributed also to a significant As deficiency detected by wavelength dispersive x-ray spectroscopy as reported by Ni et al (2008 Phys. Rev. B 78 014507). Consequences of our results are discussed in terms of disorder effects within conventional superconductivity (CSC) and unconventional superconductivity (USC). USC scenarios with nodes on individual Fermi surface sheets (FSS), e.g. p- and d-wave SC, can be discarded for our samples. The increase of dBc2/dT|Tc by sizeable disorder provides evidence for an important intraband (intra-FSS) contribution to the orbital upper critical field. We suggest that it can be ascribed either to an impurity-driven transition from s± USC to CSC of an extended s++-wave state or to a stabilized s±-state provided As-vacancies cause predominantly strong intraband scattering in the unitary limit. We compare our results with Bc2 data from the literature, which often show no PLB for fields below 60–70 T probed so far. A novel disorder-related scenario of a complex interplay of SC with two different competing magnetic instabilities is suggested.
- ItemStrain-controlled switching kinetics of epitaxial PbZr0.52Ti0.48O3 films(Milton Park : Taylor & Francis, 2013) Herklotz, A.; Guo, E.-J.; Biegalski, M.D.; Christen, H.-M.; Schultz, L.; Dörr, K.We investigate the effect of biaxial strain on the switching of ferroelectric thin films. The strain state of epitaxial PbZr0.52Ti0.48O3 films is controlled directly and reversibly by the use of piezoelectric Pb(Mg1/3Nb2/3)0.72Ti0.28O3 (001) substrates. At small external electric fields, the films show switching characteristics consistent with a creep-like domain wall motion. In this regime, we find a huge decrease of the switching time under compressive strain. For larger external electric fields, the domain wall motion is in a depinning regime. The effect of compressive strain is more moderate in this region and shows a reduction in the switching kinetics.
- ItemTuning functional properties by plastic deformation(Milton Park : Taylor & Francis, 2009) Kwon, A.R.; Neu, V.; Matias, V.; Hänisch, J.; Hühne, R.; Freudenberger, J.; Holzapfel, B.; Schultz, L.; Fähler, S.It is well known that a variation of lattice constants can strongly influence the functional properties of materials. Lattice constants can be influenced by external forces; however, most experiments are limited to hydrostatic pressure or biaxial stress. Here, we present an experimental approach that imposes a large uniaxial strain on epitaxially grown films in order to tune their functional properties. A substrate made of a ductile metal alloy covered with a biaxially oriented MgO layer is used as a template for growth of epitaxial films. By applying an external plastic strain, we break the symmetry within the substrate plane compared to the as-deposited state. The consequences of 2% plastic strain are examined for an epitaxial hard magnetic Nd2Fe14B film and are found to result in an elliptical distortion of the in-plane anisotropy below the spin-reorientation temperature. Our approach is a versatile method to study the influence of large plastic strain on various materials, as the MgO(001) layer used is a common substrate for epitaxial growth.
- ItemReversible shift in the superconducting transition for La1.85Sr0.15CuO4 and BaFe1.8Co0.2As2 using piezoelectric substrates(Milton Park : Taylor & Francis, 2010) Trommler, S.; Hühne, R.; Iida, K.; Pahlke, P.; Haindl, S.; Schultz, L.; Holzapfel, B.The use of piezoelectric substrates enables dynamic observation of the strain-dependent properties of functional materials. Based on studies with La1.85Sr0.15CuO4 (LSCO), we extended this approach to the iron arsenic superconductors represented by BaFe2− xCoxAs2 to investigate strain-driven changes in detail. We demonstrate that epitaxial thin films can be prepared on (001) Pb(Mg1/3Nb2/3)0.72Ti0.28O3 substrates using pulsed laser deposition. The structural and electric properties of grown films were characterized in detail. A reversible shift of the superconducting transition of 0.4 K for LSCO and 0.2 K for BaFe1.8Co0.2As2 was observed on applying biaxial strains of 0.022 and 0.017%, respectively.
- ItemModulated martensite: Why it forms and why it deforms easily(Milton Park : Taylor & Francis, 2011) Kaufmann, S.; Niemann, R.; Thersleff, T.; Rößler, U.K.; Heczko, O.; Buschbeck, J.; Holzapfel, B.; Schultz, L.; Fähler, S.Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic phases. We outline the origin of modulated phases, their connection with tetragonal martensite and consequences owing to their functional properties by analysing the martensitic microstructure of epitaxial Ni–Mn–Ga films from the atomic to the macroscale. Geometrical constraints at an austenite–martensite phase boundary act down to the atomic scale. Hence, a martensitic microstructure of nanotwinned tetragonal martensite can form. Coarsening of twin variants can reduce twin boundary energy, a process we could observe from the atomic to the millimetre scale. Coarsening is a fractal process, proceeding in discrete steps by doubling twin periodicity. The collective defect energy results in a substantial hysteresis, which allows the retention of modulated martensite as a metastable phase at room temperature. In this metastable state, elastic energy is released by the formation of a 'twins within twins' microstructure that can be observed from the nanometre to the millimetre scale. This hierarchical twinning results in mesoscopic twin boundaries. Our analysis indicates that mesoscopic boundaries are broad and diffuse, in contrast to the common atomically sharp twin boundaries of tetragonal martensite. We suggest that the observed extraordinarily high mobility of such mesoscopic twin boundaries originates from their diffuse nature that renders pinning by atomistic point defects ineffective.
- ItemThe magneto-optical gradient effect in an exchange-biased thin film: Experimental evidence for classical diffraction theory(Milton Park : Taylor & Francis, 2010) Schäfer, R.; Hamann, C.; McCord, J.; Schultz, L.; Kamberský, V.The magneto-optical gradient effect decorates the boundaries of in-plane domains even at perpendicular incidence of light in an optical polarization microscope. For its explanation, the classical magneto-optical diffraction theory was previously used to derive the effect from the same gyrotropic interaction as the Kerr effect. In order to explain the symmetry of the experimentally observed contrast on bulk ferromagnetic crystals, planar as well as perpendicular subsurface gradients in the magnetization had to be assumed. This was particularly needed when the surface magnetizations in neighboring domains pointed head-on and a gradient contrast appeared also in conditions of vanishing gyrotropic interaction at the surface. The gradient contrast in such conditions should not appear in very thin films where perpendicular magnetization gradients are not enforced by reduction of magnetostatic energy. Here we present the first experimental confirmation of this expectation, thus closing an experimental gap in verifying the predictions of the diffraction theory.
- ItemInvestigation of the strain-sensitive superconducting transition of BaFe1.8Co0.2As2 thin films utilizing piezoelectric substrates(Milton Park : Taylor & Francis, 2014) Trommler, S.; Hänisch, J.; Iida, K.; Kurth, F.; Schultz, L.; Holzapfel, B.; Hühne, R.The preparation of biaxially textured BaFe1.8Co0.2As2 thin films has been optimized on MgO single crystals and transfered to piezoelectric (001) Pb(Mg1/3Nb2/3)0.72Ti0.28O3 substrates. By utilizing the inverse piezoelectric effect the lattice parameter of these substrates can be controlled applying an electric field, leading to a induction of biaxial strain into the superconducting layer. High electric fields were used to achieve a total strain of up to 0.05% at low temperatures. A sharpening of the resistive transition and a shift of about 0.6 K to higher temperatures was found at a compressive strain of 0.035%.
- ItemMagnetically induced reorientation of martensite variants in constrained epitaxial Ni-Mn-Ga films grown on MgO(001)(Milton Park : Taylor & Francis, 2008) Thomas, M.; Heczko, O.; Buschbeck, J.; Rößler, U.K.; McCord, J.; Scheerbaum, N.; Schultz, L.; Fähler, S.Magnetically induced reorientation (MIR) is observed in epitaxial orthorhombic Ni-Mn-Ga films. Ni-Mn-Ga films have been grown epitaxially on heated MgO(001) substrates in the cubic austenite state. The unit cell is rotated by 45° relative to the MgO cell. The growth, structure texture and anisotropic magnetic properties of these films are described. The crystallographic analysis of the martensitic transition reveals variant selection dominated by the substrate constraint. The austenite state has low magnetocrystalline anisotropy. In the martensitic state, the magnetization curves reveal an orthorhombic symmetry having three magnetically non-equivalent axes. The existence of MIR is deduced from the typical hysteresis within the first quadrant in magnetization curves and independently by texture measurement without and in the presence of a magnetic field probing micro structural changes. An analytical model is presented, which describes MIR in films with constrained overall extension by the additional degree of freedom of an orthorhombic structure compared to the tetragonal structure used in the standard model.