8 results
Search Results
Now showing 1 - 8 of 8
- ItemAblation-dominated arcs in CO2 atmosphere—Part I: Temperature determination near current zero(Basel : MDPI, 2020) Methling, Ralf; Khakpour, Alireza; Götte, Nicolas; Uhrlandt, DirkWall-stabilized arcs dominated by nozzle–ablation are key elements of self-blast circuit breakers. In the present study, high-current arcs were investigated using a model circuit breaker (MCB) in CO2 as a gas alternative to SF6 (gas sulfur hexafluoride) and in addition a long polytetrafluoroethylene nozzle under ambient conditions for stronger ablation. The assets of different methods for optical investigation were demonstrated, e.g., high-speed imaging with channel filters and optical emission spectroscopy. Particularly the phase near current zero (CZ) crossing was studied in two steps. In the first step using high-speed cameras, radial temperature profiles have been determined until 0.4 ms before CZ in the nozzle. Broad temperature profiles with a maximum of 9400 K have been obtained from analysis of fluorine lines. In the second step, the spectroscopic sensitivity was increased using an intensified CCD camera, allowing single-shot measurements until few microseconds before CZ in the MCB. Ionic carbon and atomic oxygen emission were analyzed using absolute intensities and normal maximum. The arc was constricted and the maximum temperature decreased from > 18,000 K at 0.3 ms to about 11,000 K at 0.010 ms before CZ. The arc plasma needs about 0.5–1.0 ms after both the ignition phase and the current zero crossing to be completely dominated by the ablated wall material. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemAblation-dominated arcs in CO2 atmosphere—Part II: Molecule emission and absorption(Basel : MDPI, 2020) Methling, Ralf; Götte, Nicolas; Uhrlandt, DirkMolecule radiation can be used as a tool to study colder regions in switching arc plasmas like arc fringes in contact to walls and ranges around current zero (CZ). This is demonstrated in the present study for the first time for the case of ablation-dominated high-current arcs as key elements of self-blast circuit breakers. The arc in a model circuit breaker (MCB) in CO2 with and an arc in a long nozzle under ambient conditions with peak currents between 5 and 10 kA were studied by emission and absorption spectroscopy in the visible spectral range. The nozzle material was polytetrafluoroethylene (PTFE) in both cases. Imaging spectroscopy was carried out either with high-speed cameras or with intensified CCD cameras. A pulsed high-intensity Xe lamp was applied as a background radiator for the broad-band absorption spectroscopy. Emission of Swan bands from carbon dimers was observed at the edge of nozzles only or across the whole nozzle radius with highest intensity in the arc center, depending on current and nozzle geometry. Furthermore, absorption of C2 Swan bands and CuF bands were found with the arc plasma serving as background radiator. After CZ, only CuF was detected in absorption experiments. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemElectrical Modelling of Switching Arcs in a Low Voltage Relay at Low Currents(Basel : MDPI, 2020) Najam, Ammar; Pieterse, Petrus; Uhrlandt, DirkThe arc behaviour of short, low current switching arcs is not well understood and lacks a reliable model. In this work, the behaviour of an arc in the air is studied during contact separation at low DC currents (0.5 A to 20 A) and for small gap lengths (0 mm to 6 mm). The experiments are performed on a low voltage relay with two different electrode configurations. The arc voltage is measured during the opening of the contacts at constant current. The arc length is determined optically by tracing the mean path of the arc over time from a series of high-speed images. From the synchronised data of voltage vs. distance, first a sudden jump of the voltage at the start of contact opening is observed. Secondly, a sudden change in the voltage gradient occurs as the arc is elongated. Short arcs with a length up to approximately 1.25 mm show an intense radiation in the overall gap region and high voltage gradients. An unexpected behaviour never reported before was observed for longer arcs at low current: Two characteristic regions occur, a region in front of the cathode, with a length of approximately 1.25 mm, having an intense radiation and a high voltage gradient as well as a region of much lower radiation intensity and a comparatively lower voltage gradient in the remaining gap area despite a small anode spot region. The characteristic border of approximately 1.25 mm is almost independent of the current. A generalised arc voltage model is proposed based on the assumption that a constant sheath voltage and two discrete field regions exist, which are modelled as two independent linear functions of voltage vs. length. The data for various currents is combined to yield a general non-linear function for predicting the arc voltage vs. arc length and current.
- ItemUnified modelling of TIG microarcs with evaporation from copper anode(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2021) Baeva, Margarita; Methling, Ralf; Uhrlandt, DirkA previously developed unified model of a tungsten-inert gas (TIG) microarc has been extended to take into account the melting of the anode made of copper and the release of copper atoms due to its evaporation. The copper atoms enter the plasma to become excited and ionized. The presence of copper atoms and ions can strongly change the plasma parameters. The extended unified model further includes excited states of copper and collisional and radiative processes between them. Predictions of the parameters of the microarc plasma in the presence of copper species are presented and discussed.
- ItemPlasma parameters of microarcs towards minuscule discharge gap(Weinheim : Wiley-VCH, 2020) Baeva, Margarita; Loffhagen, Detlef; Becker, Markus M.; Siewert, Erwan; Uhrlandt, DirkThis paper describes the behaviour of the plasma parameters of microarcs generated between a cooled copper anode and a ceriated tungsten cathode by means of a one-dimensional unified non-equilibrium model for gap lengths between 15 and 200 μm and current densities from 2 × 105 up to 106 A/m2. The results obtained show that the decrease of the gap length to a few tens of micrometres for a given current density results in a progressive shrinking of the quasi-neutral bulk in the microplasma and its complete disappearance. The decrease of the gap length further leads to an increase of the discharge voltage and the electron temperature and to slightly less heating of the gas. © 2020 The Authors. Contributions to Plasma Physics Published by Wiley-VCH Verlag GmbH & Co. KGaA
- ItemGrundlegende Charakterisierung und Modellierung der VUV-Ausbeute von Xenon-Entladungen : Schlussbericht zum Teilvorhaben(Hannover : Technische Informationsbibliothek (TIB), 2005) Lange, Hartmut; Bussiahn, René; Gortchakov, Sergej; Holtz, Peter; Loffhagen, Detlef; Uhrlandt, Dirk[no abstract available]
- ItemInnoPlas - Innovative Atmosphärendruck-Plasmaprozesse für industrielle Anwendungen : Schlussbericht ; Pilotprojekte: ConPlas - plasmagestützte Dünnschichten, PLexc - plasmagestützte Lackierungen, ProTool - Entwicklungswerkzeuge zur Optimierung von Plasmaverfahren und -quellen ; ForMaT2(Hannover : Technische Informationsbibliothek (TIB), 2011) Brandenburg, Ronny; Horn, Stefan; Krohmann, Udo; Rackow, Kristian; Uhrlandt, Dirk; Witt, Göran; Weltmann, Klaus-Dieter[no abstract available]
- ItemThermal protection implementation of the contact overheadline based on bay controllers of electric transport traction substations in the mining industry(Sankt-Peterburg : Inst., 2021) Lantsev, Dmitry; Frolov, Vladimir; Zverev, Sergej; Uhrlandt, Dirk; Valenta, JiříThe article presents the principle of thermal protection of the contact overheadlineand substantiates the possibility of practical implementation of this principle for rail electric transport in the mining industry. The algorithm for the implementation of modern digital protection of the contact overhead line as one of the functions of the controller is described. A mathematical model of thermal protection is proposed, which follows from the solution of the heat balance equation. The model takes into account the coefficient of the electrical networktopology, as well as the coefficient of consumption of the current-carrying core of the cable, which determines the reduction in the conducting section from contact erosion and the growth of oxide films. Corrections for air flows are introduced when receiving data from an external anemometer, via telemechanics protocol. The mathematical model was tested by writing a real thermal protection program in the C programming language for the bay controller, based on the circuitry of which is the STM32F407IGT6 microcontroller for the microcontroller unit. Verification tests were carried out on a serial bay controller in 2020. The graphs for comparing the calculated and actual values of temperatures, with different flow rates of the current-carrying conductor of the DC cable, are given. To obtain data, telemechanics protocols IEC 60870-104 and Modbus TCP, PLC Segnetics SMH4 were used.