3 results
Search Results
Now showing 1 - 3 of 3
- ItemMicrostructure and Deformation Response of TRIP-Steel Syntactic Foams to Quasi-Static and Dynamic Compressive Loads(Basel : MDPI, 2018-4-24) Ehinger, David; Weise, Jörg; Baumeister, Joachim; Funk, Alexander; Waske, Anja; Krüger, Lutz; Martin, UlrichThe implementation of hollow S60HS glass microspheres and Fillite 106 cenospheres in a martensitically transformable AISI 304L stainless steel matrix was realized by means of metal injection molding of feedstock with varying fractions of the filler material. The so-called TRIP-steel syntactic foams were studied with respect to their behavior under quasi-static compression and dynamic impact loading. The interplay between matrix material behavior and foam structure was discussed in relation to the findings of micro-structural investigations, electron back scatter diffraction EBSD phase analyses and magnetic measurements. During processing, the cenospheres remained relatively stable retaining their shape while the glass microspheres underwent disintegration associated with the formation of pre-cracked irregular inclusions. Consequently, the AISI 304L/Fillite 106 syntactic foams exhibited a higher compression stress level and energy absorption capability as compared to the S60HS-containing variants. The α′ -martensite kinetic of the steel matrix was significantly influenced by material composition, strain rate and arising deformation temperature. The highest ferromagnetic α′-martensite phase fraction was detected for the AISI 304L/S60HS batches and the lowest for the TRIP-steel bulk material. Quasi-adiabatic sample heating, a gradual decrease in strain rate and an enhanced degree of damage controlled the mechanical deformation response of the studied syntactic foams under dynamic impact loading.
- ItemGetting magnetocaloric materials into good shape: Cold-working of La(Fe, Co, Si)13 by powder-in-tube-processing(Amsterdam [u.a.] : Elsevier Ltd., 2018) Funk, Alexander; Freudenberger, Jens; Waske, Anja; Krautz, MariaThe powder-in-tube (PIT) technology was applied to La(Fe, Co, Si)13 powder cladded by a thin seamless austenitic steel jacket. Wires appear to be promising in the search for alternative regenerator geometries, since they offer various possibilities of arrangements allowing to optimise heat transfer and pressure loss within the boundaries set by parallel plate and sphere beds. Here, pre-alloyed La(Fe, Co, Si)13 powder was filled in a AISI 316L austenitic steel tube and swaged to wires with an outer diameter of 1 mm. By mechanical deformation, the steel jacket thickness was reduced to about 100 μm surrounding the magnetocaloric core. A post-annealing of only 10 min at 1050 °C is sufficient to form the magnetocaloric NaZn13-type phase resulting in an entropy change close to the value of a pure reference sample. The presented technology is not limited to La(Fe, Co, Si)13/steel combination but can be extended to material pairs involving wire core materials with a first order transition, such as Fe2P-type or Heusler alloys.
- ItemEfficient and affordable thermomagnetic materials for harvesting low grade waste heat(College Park, ML : American Institute of Physics, 2021) Dzekan, Daniel; Waske, Anja; Nielsch, Kornelius; Fähler, SebastianIndustrial processes release substantial quantities of waste heat, which can be harvested to generate electricity. At present, the conversion of low grade waste heat to electricity relies solely on thermoelectric materials, but such materials are expensive and have low thermodynamic efficiencies. Although thermomagnetic materials may offer a promising alternative, their performance remains to be evaluated, thereby hindering their real-world application. Here, the efficiency and cost effectiveness of thermomagnetic materials are evaluated for the usage in motors, oscillators, and generators for converting waste heat to electricity. The analysis reveals that up to temperature differences of several 10 K, the best thermomagnetic materials have the potential to compete with thermoelectric materials. Importantly, it is found that the price per watt of some thermomagnetic materials is much lower compared to that of present-day thermoelectrics, which can become competitive with conventional power plants. This materials library enables the selection of the best available thermomagnetic materials for harvesting waste heat and gives guidelines for their future development.