2 results
Search Results
Now showing 1 - 2 of 2
- ItemRare-earth-free MnAl-C-Ni permanent magnets produced by extrusion of powder milled from bulk(Amsterdam : Elsevier, 2020) Feng, Le; Freudenberger, Jens; Mix, Torsten; Nielsch, Kornelius; Woodcock, Thomas GeorgeRare-earth-free MnAl-C-Ni permanent magnets have been produced for the first time by extruding powders milled from bulk. The resulting materials, fabricated using different conditions, contained a large volume fraction (> 0.92) of the desired τ-phase. In terms of the maximum energy product, the best performance obtained for a whole, transverse section of the extruded material was (BH)max = 46 kJm−3, and was (BH)max = 49 kJm−3 for a sample taken from near the edge of this section. Analysis showed that this material was comparable to the long-established benchmark, comprising MnAl-C-based magnets extruded in industry from bulk or from gas-atomised powder. Such materials are no longer available. The microstructure of the materials produced here consisted of fine, recrystallised grains, which exhibited an <001> fibre texture with intermediate texture quality and of larger, non-recrystallised regions, which contained hierarchical twinning and a high density of defects. The volume fraction and size of the non-recrystallised regions was greatly reduced by decreasing the size of the initial powder particles. This led to a large increase in the squareness factor of the demagnetisation curve and consequently to the high (BH)max values observed.
- ItemAutomated meshing of electron backscatter diffraction data and application to finite element micromagnetics(Amsterdam [u.a.] : Elsevier, 2019) Gusenbauer, Markus; Fischbacher, Johann; Kovacs, Alexander; Oezelt, Harald; Bance, Simon; Zhao, Panpan; Woodcock, Thomas George; Schrefl, ThomasThis paper gives a procedure for automatically generating finite element meshes with an adaptive mesh size from Electron Backscatter Diffraction (EBSD) data. After describing the procedure in detail, including preliminary and image processing steps, an example application is given. The method was used to carry out finite element (FE) micromagnetic simulations based on real microstructures in the hard magnetic material, MnAl. A fast micromagnetic solver was used to compute hysteresis properties from the finite element mesh generated automatically from EBSD data. The visualization of the magnetization evolution showed that the reversal is governed by domain wall pinning at twin boundaries. The calculated coercive fields are very sensitive to changes of the Gilbert damping constant, even for low field rates. © 2019 The Authors