Search Results
Heteroepitaxy of group IV materials for future device application
Heteroepitxy of group IV materials (Si, SiGe, and Ge) has great potential for boosting Si-based novel device performance because of the possibility for strain, band gap/Fermi-level engineering, and applying emerging artificial materials such as a superlattice (SL) and nanodots. In order to control group IV heteroepitaxy processes, strain, interface, and surface energies are very essential parameters. They affect dislocation formation, interface steepness, reflow of deposited layers, and also surface reaction itself during the growth. Therefore, process control and crystallinity management of SiGe heteroepitaxy are difficult especially in the case of high Ge concentrations. In this paper, we review our results of abrupt SiGe/Si interface fabrication by introducing C-delta layers and the influence of strain on the surface reaction of SiGe. Three-dimensional self-ordered SiGe and Ge nanodot fabrication by proactively using strain and surface energies by depositing SiGe/Si and Ge/SiGe SL are also reviewed.
Non-isothermal phase-field simulations of laser-written in-plane SiGe heterostructures for photonic applications
Advanced solid-state devices, including lasers and modulators, require semiconductor heterostructures for nanoscale engineering of the electronic bandgap and refractive index. However, existing epitaxial growth methods are limited to fabrication of vertical heterostructures grown layer by layer. Here, we report the use of finite-element-method-based phase-field modelling with thermocapillary convection to investigate laser inscription of in-plane heterostructures within silicon-germanium films. The modelling is supported by experimental work using epitaxially-grown Si0.5Ge0.5 layers. The phase-field simulations reveal that various in-plane heterostructures with single or periodic interfaces can be fabricated by controlling phase segregation through modulation of the scan speed, power, and beam position. Optical simulations are used to demonstrate the potential for two devices: graded-index waveguides with Ge-rich (>70%) cores, and waveguide Bragg gratings with nanoscale periods (100–500 nm). Periodic heterostructure formation via sub-millisecond modulation of the laser parameters opens a route for post-growth fabrication of in-plane quantum wells and superlattices in semiconductor alloy films.
Vertical alignment control of self-ordered multilayered Ge nanodots on SiGe
Self-ordered multilayered Ge nanodots with SiGe spacers on a Si0.4Ge0.6 virtual substrate are fabricated using reduced-pressure chemical vapor deposition, and the mechanism of vertical ordering is investigated. The process conditions of Ge and SiGe layer deposition are H2-GeH4 at 550 °C and H2-SiH4-GeH4 at 500 °C-550 °C, respectively. By depositing the SiGe at 550 °C or increasing Ge content, the SiGe surface becomes smooth, resulting in vertically aligned Ge nanodots to reduce strain energy. Ge nanodots prefer to grow on the nanodot where the SiGe is relatively tensile strained due to the buried Ge nanodot underneath. By depositing at 500 °C and lowering Ge content, checkerboard-like surface forms, and the following Ge nanodots grow at staggered positions to reduce surface energy. The Ge nanodots are laterally aligned along the elastically soft 〈100〉 direction without pre-structuring resulting from the strain distribution.
CMOS-Compatible Bias-Tunable Dual-Band Detector Based on GeSn/Ge/Si Coupled Photodiodes
Infrared (IR) multispectral detection is attracting increasing interest with the rising demand for high spectral sensitivity, room temperature operation, CMOS-compatible devices. Here, we present a two-terminal dual-band detector, which provides a bias-switchable spectral response in two distinct IR bands. The device is obtained from a vertical GeSn/Ge/Si stack, forming a double junction n-i-p-i-n structure, epitaxially grown on a Si wafer. The photoresponse can be switched by inverting the bias polarity between the near and the short-wave IR bands, with specific detectivities of 1.9 × 1010 and 4.0 × 109 cm·(Hz)1/2/W, respectively. The possibility of detecting two spectral bands with the same pixel opens up interesting applications in the field of IR imaging and material recognition, as shown in a solvent detection test. The continuous voltage tuning, combined with the nonlinear photoresponse of the detector, enables a novel approach to spectral analysis, demonstrated by identifying the wavelength of a monochromatic beam. © 2021 The Authors. Published by American Chemical Society.
X-ray characterization of Ge dots epitaxially grown on nanostructured Si islands on silicon-on-insulator substrates
On the way to integrate lattice mismatched semiconductors on Si(001), the Ge/Si heterosystem was used as a case study for the concept of compliant substrate effects that offer the vision to be able to integrate defect-free alternative semiconductor structures on Si. Ge nanoclusters were selectively grown by chemical vapour deposition on Si nano-islands on silicon-on-insulator (SOI) substrates. The strain states of Ge clusters and Si islands were measured by grazing-incidence diffraction using a laboratory-based X-ray diffraction technique. A tensile strain of up to 0.5% was detected in the Si islands after direct Ge deposition. Using a thin (∼10 nm) SiGe buffer layer between Si and Ge the tensile strain increases to 1.8%. Transmission electron microscopy studies confirm the absence of a regular grid of misfit dislocations in such structures. This clear experimental evidence for the compliance of Si nano-islands on SOI substrates opens a new integration concept that is not only limited to Ge but also extendable to semiconductors like III–V and II–VI materials.
Selective lateral germanium growth for local GeOI fabrication
High quality local Germanium-on-oxide (GeOI) wafers are fabricated using selective lateral germanium (Ge) growth technique by a single wafer reduced pressure chemical vapor deposition system. Mesa structures of 300 nm thick epitaxial silicon (Si) interposed by SiO2 cap and buried oxide are prepared. HCl vapor phase etching of Si is performed prior to selective Ge growth to remove a part of the epitaxial Si to form cavity under the mesa. By following selective Ge growth, the cavity was filled. Cross section TEM shows dislocations of Ge which are located near Si / Ge interface only. By plan view TEM, it is shown that the dislocations in Ge which direct to SiO2 cap or to buried-oxide (BOX) are located near the interface of Si and Ge. The dislocations which run parallel to BOX are observed only in [110] and [1–10] direction resulting Ge grown toward [010] direction contains no dislocations. This mechanism is similar to aspect-ratio-trapping but here we are using a horizontal approach, which offers the option to remove the defective areas by standard structuring techniques. A root mean square of roughness of ∼0.2 nm is obtained after the SiO2 cap removal. Tensile strain in the Ge layer is observed due to higher thermal expansion coefficient of Ge compared to Si and SiO2.