10 results
Search Results
Now showing 1 - 10 of 10
- ItemSpatially modulated broad-area lasers for narrow lateral far-field divergence(Washington, DC : Soc., 2021) Zeghuzi, Anissa; Koester, Jan-Philipp; Radziunas, Mindaugas; Christopher, Heike; Wenzel, Hans; Knigge, AndreaA novel laser design is presented that combines a longitudinal-lateral gain-loss modulation with an additional phase tailoring achieved by etching rectangular trenches. At 100 A pulsed operation, simulations predict a far-field profile with 0.3° full width at half maximum (ΘFWHM=0.3∘) where a 0.4°-wide main lobe contains 40% of the emitted optical output power (Θ40%=0.4∘). While far-field measurements of these structured lasers emitting 10 ns long pulses with 35 W peak power confirm a substantial enhancement of radiation within the central 1∘ angular range, the measured far-field intensity outside of the obtained central peak remains high.
- ItemSimulation and design of a compact GaAs based tunable dual-wavelength diode laser system(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2019) Koester, Jan-Philipp; Radziunas, Mindaugas; Zeghuzi, Anissa; Wenzel, Hans; Knigge, AndreaWe present our design of a compact, integrated and tunable dual-wavelength diode laser system emitting around 785 nm, which is of interest for several applications like Raman spectroscopy and the generation of THz radiation. To achieve a more compact device compared to previous GaAs based designs two etch depths are realized, leading to shallowly etched ridge waveguides in regions were optical gain is applied and deeply etched waveguides used to enable compact integrated waveguide components. The device parameters are optimized using a numerically efficient simulation tool for passive waveguides. Subsequently, the entire laser system is further analyzed applying a sophisticated traveling-wave equation based model for active devices giving access to internal intensity and carrier density distributions. It is shown that active laser simulations are crucial to deduce critical and performance limiting design aspects not accessible via an all-passive simulation.
- ItemTime-dependent simulation of thermal lensing in high-power broad-area semiconductor lasers(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2019) Zeghuzi, Anissa; Wünsche, Hans-Jürgen; Wenzel, Hans; Radziunas, Mindaugas; Fuhrmann, Jürgen; Klehr, Andreas; Bandelow, Uwe; Knigge, AndreaWe propose a physically realistic and yet numerically applicable thermal model to account for short and long term self-heating within broad-area lasers. Although the temperature increase is small under pulsed operation, a waveguide that is formed within a few-ns-long pulse can result in a transition from a gain-guided to an index-guided structure, leading to near and far field narrowing. Under continuous wave operation the longitudinally varying temperature profile is obtained self-consistently. The resulting unfavorable narrowing of the near field can be successfully counteracted by etching trenches.
- ItemEfficient coupling of electro-optical and heat-transport models for broad-area semiconductor lasers(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2018) Radziunas, Mindaugas; Fuhrmann, Jürgen; Zeghuzi, Anissa; Wünsche, Hans-Jürgen; Koprucki, Thomas; Brée, Carsten; Wenzel, Hans; Bandelow, UweIn this work, we discuss the modeling of edge-emitting high-power broad-area semiconductor lasers. We demonstrate an efficient iterative coupling of a slow heat transport (HT) model defined on multiple vertical-lateral laser cross-sections with a fast dynamic electro-optical (EO) model determined on the longitudinal-lateral domain that is a projection of the device to the active region of the laser. Whereas the HT-solver calculates temperature and thermally-induced refractive index changes, the EO-solver exploits these distributions and provides time-averaged field intensities, quasi-Fermi potentials, and carrier densities. All these time-averaged distributions are used repetitively by the HT-solver for the generation of the heat sources entering the HT problem solved in the next iteration step.
- ItemTraveling wave analysis of non-thermal far-field blooming in high-power broad-area lasers(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2019) Zeghuzi, Anissa; Radziunas, Mindaugas; Wünsche, Hans-Jürgen; Koester, Jan-Philipp; Wenzel, Hans; Bandelow, Uwe; Knigge, AndreaWith rising current the lateral far-field angle of high-power broad-area lasers widens (far-field blooming) which can be partly attributed to non-thermal effects due to carrier induced refractive index and gain changes that become the dominant mechanism under pulsed operation. To analyze the non-thermal contribution to far-field blooming we use a traveling wave based model that properly describes the injection of the current into and the diffusion of the carriers within the active region. Although no pre-assumptions regarding the modal composition of the field is made and filamentation is automatically accounted for, the highly dynamic time-dependent optical field distribution can be very well represented by only few modes of the corresponding stationary waveguide equation obtained by a temporal average of the carrier density and field intensity. The reduction of current spreading and spatial holeburning by selecting proper design parameters can substantially improve the beam quality of the laser.
- ItemEfficient coupling of inhomogeneous current spreading and dynamic electro-optical models for broad-area edge-emitting semiconductor devices(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2017) Radziunas, Mindaugas; Zeghuzi, Anissa; Fuhrmann, Jürgen; Koprucki, Thomas; Wünsche, Hans-Jürgen; Wenzel, Hans; Bandelow, UweWe extend a 2 (space) + 1 (time)-dimensional traveling wave model for broad-area edgeemitting semiconductor lasers by a model for inhomogeneous current spreading from the contact to the active zone of the laser. To speedup the performance of the device simulations, we suggest and discuss several approximations of the inhomogeneous current density in the active zone.
- ItemDynamics in high-power diode lasers(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2020) Bandelow, Uwe; Radziunas, Mindaugas; Zeghuzi, Anissa; Wünsche, Hans-Jürgen; Wenzel, HansHigh-power broad-area diode lasers (BALs) exhibit chaotic spatio-temporal dynamics above threshold. Under high power operation, where they emit tens of watts output, large amounts of heat are generated, with significant impact on the laser operation. We incorporate heating effects into a dynamical electro-optical (EO) model for the optical field and carrier dynamics along the quantum-well active zone of the laser. Thereby we effectively couple the EO and heat-transport (HT) solvers. Thermal lensing is included by a thermally-induced contribution to the index profile. The heat sources obtained with the dynamic EO-solver exhibit strong variations on short time scales, which however have only a marginal impact on the temperature distribution. We consider two limits: First, the static HT-problem, with time-averaged heat sources, which is solved iteratively together with the EO solver. Second, under short pulse operation the thermally induced index distribution can be obtained by neglecting heat flow. Although the temperature increase is small, a waveguide is introduced here within a few-ns-long pulse resulting in significant near field narrowing. We further show that a beam propagating in a waveguide structure utilized for BA lasers does not undergo filamentation due to spatial holeburning. Moreover, our results indicate that in BALs a clear optical mode structure is visible which is neither destroyed by the dynamics nor by longitudinal effects.
- ItemMode competition in broad-ridge-waveguide lasers(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2020) Köster, Jan-Philipp; Putz, Alexander; Wenzel, Hans; Wünsche, Hans-Jürgen; Radziunas, Mindaugas; Stephan, Holger; Wilkens, Martin; Zeghuzi, Anissa; Knigge, AndreaThe lateral brightness achievable with high-power GaAs-based laser diodes having long and broad waveguides is commonly regarded to be limited by the onset of higher-order lateral modes. For the study of the lateral-mode competition two complementary simulation tools are applied, representing different classes of approximations. The first tool bases on a completely incoherent superposition of mode intensities and disregards longitudinal effects like spatial hole burning, whereas the second tool relies on a simplified carrier transport and current flow. Both tools yield agreeing power-current characteristics that fit the data measured for 5 to 23 µm wide ridges. Also, a similarly good qualitative conformance of the near and far fields is found. However, the threshold of individual modes, the partition of power between them at a given current, and details of the near and far fields show differences. These differences are the consequence of a high sensitivity of the mode competition to details of the models and of the device structure. Nevertheless, it can be concluded concordantly that the brightness rises with increasing ridge width irrespective of the onset of more and more lateral modes. The lateral brightness 2W · mm¯¹ 1mrad¯¹ at 10MW · cm¯²2 power density on the front facet of the investigated laser with widest ridge (23 µm) is comparable with best values known from much wider broad-area lasers. In addition, we show that one of the simulation tools is able to predict beam steering and coherent beam.
- ItemModeling of current spreading in high-power broad-area lasers and its impact on the lateral far field divergence(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2018) Zeghuzi, Anissa; Radziunas, Mindaugas; Wenzel, Hans; Wünsche, Hans-Jürgen; Bandelow, Uwe; Knigge, AndreaThe effect of current spreading on the lateral farfield divergence of highpower broadarea lasers is investigated with a timedependent model using different descriptions for the injection of carriers into the active region. Most simulation tools simply assume a spatially constant injection current density below the contact stripe and a vanishing current density beside. Within the driftdiffusion approach, however, the injected current density is obtained from the gradient of the quasiFermi potential of the holes, which solves a Laplace equation in the pdoped region if recombination is neglected. We compare an approximate solution of the Laplace equation with the exact solution and show that for the exact solution the highest farfield divergence is obtained. We conclude that an advanced modeling of the profiles of the injection current densities is necessary for a correct description of farfield blooming in broadarea lasers.
- ItemSpatially modulated broad-area lasers for narrow lateral far-field divergence(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2021) Zeghuzi, Anissa; Koester, Jan-Philipp; Radziunas, Mindaugas; Christopher, Heike; Wenzel, Hans; Knigge, AndreaA novel laser design is presented that combines a longitudinal-lateral gain-loss modulation with an additional phase tailoring achieved by etching rectangular trenches. At 100 A pulsed operation, simulations predict a far-field profile with 0.3-degree full width at half maximum where a 0.4-degree-wide main lobe contains 40% of the emitted optical output power. While far-field measurements of these structured lasers emitting 10 ns long pulses with 35 W peak power confirm a substantial enhancement of radiation within the central one-degree angular range, the measured far-field intensity outside of the obtained central peak remains high.