Filters

2000 - 2009142010 - 201841

More filters

201955
Reset filters

Settings

End date: 2019 × Start date: 2019 × Has files: Yes × WGL Institute: FBH ×

Search Results

Now showing 1 - 10 of 55
  • Thumbnail Image
    Item
    Simulation of microwave circuits and laser structures including PML by means of FIT
    (München : European Geopyhsical Union, 2004) Hebermehl, G.; Schefter, J.; Schlundt, R.; Tischler, Th.; Zscheile, H.; Heinrich, W.
    Field-oriented methods which describe the physical properties of microwave circuits and optical structures are an indispensable tool to avoid costly and time-consuming redesign cycles. Commonly the electromagnetic characteristics of the structures are described by the scattering matrix which is extracted from the orthogonal decomposition of the electric field. The electric field is the solution of an eigenvalue and a boundary value problem for Maxwell’s equations in the frequency domain. We discretize the equations with staggered orthogonal grids using the Finite Integration Technique (FIT). Maxwellian grid equations are formulated for staggered nonequidistant rectangular grids and for tetrahedral nets with corresponding dual Voronoi cells. The interesting modes of smallest attenuation are found solving a sequence of eigenvalue problems of modified matrices. To reduce the execution time for high-dimensional problems a coarse and a fine grid is used. The calculations are carried out, using two levels of parallelization. The discretized boundary value problem, a large-scale system of linear algebraic equations with different right-hand sides, is solved by a block Krylov subspace method with various preconditioning techniques. Special attention is paid to the Perfectly Matched Layer boundary condition (PML) which causes non physical modes and a significantly increased number of iterations in the iterative methods.
  • Thumbnail Image
    Item
    Effect of electron blocking layer doping and composition on the performance of 310 nm light emitting diodes
    (Basel : MDPI, 2017) Kolbe, Tim; Knauer, Arne; Rass, Jens; Cho, Hyun Kyong; Hagedorn, Sylvia; Einfeldt, Sven; Kneissl, Michael; Weyers, Markus
    The effects of composition and p-doping profile of the AlGaN:Mg electron blocking layer (EBL) in 310 nm ultraviolet B (UV-B) light emitting diodes (LEDs) have been investigated. The carrier injection and internal quantum efficiency of the LEDs were simulated and compared to electroluminescence measurements. The light output power depends strongly on the temporal biscyclopentadienylmagnesium (Cp 2 Mg) carrier gas flow profile during growth as well as on the aluminum profile of the AlGaN:Mg EBL. The highest emission power has been found for an EBL with the highest Cp 2 Mg carrier gas flow and a gradually decreasing aluminum content in direction to the p-side of the LED. This effect is attributed to an improved carrier injection and confinement that prevents electron leakage into the p-doped region of the LED with a simultaneously enhanced carrier injection into the active region.
  • Thumbnail Image
    Item
    Diode laser based light sources for biomedical applications
    (Hoboken, NJ : Wiley, 2012) Müller, André; Marschall, Sebastian; Jensen, Ole Bjarlin; Fricke, Jörg; Wenzel, Hans; Sumpf, Bernd; Andersen, Peter E.
    Diode lasers are by far the most efficient lasers currently available. With the ever-continuing improvement in diode laser technology, this type of laser has become increasingly attractive for a wide range of biomedical applications. Compared to the characteristics of competing laser systems, diode lasers simultaneously offer tunability, high-power emission and compact size at fairly low cost. Therefore, diode lasers are increasingly preferred in important applications, such as photocoagulation, optical coherence tomography, diffuse optical imaging, fluorescence lifetime imaging, and terahertz imaging. This review provides an overview of the latest development of diode laser technology and systems and their use within selected biomedical applications.
  • Thumbnail Image
    Item
    Cathodoluminescence and TEM investigations of structural and optical properties of AlGaN on epitaxial laterally overgrown AlN/sapphire templates
    (Milton Park : Taylor & Francis, 2013) Zeimer, U.; Mogilatenko, A.; Kueller, V.; Knauer, A.; Weyers, M.
    Surface steps as high as 15 nm on up to 10 μm thick AlN layers grown on patterned AlN/sapphire templates play a major role for the structural and optical properties of AlxGa1−xN layers with x ≥ 0.5 grown subsequently by metalorganic vapour phase epitaxy. The higher the Ga content in these layers is, the stronger is the influence of the surface morphology on their properties. For x = 0.5 not only periodic inhomogeneities in the Al content due to growth of Ga-rich facets are observed by cathodoluminescence, but these facets give rise to additional dislocation formation as discovered by annular dark-field scanning transmission electron microscopy. For AlxGa1−xN layers with x = 0.8 the difference in Al content between facets and surrounding material is much smaller. Therefore, the threading dislocation density (TDD) is only defined by the TDD in the underlying epitaxially laterally overgrown (ELO) AlN layer. This way high quality Al0.8Ga0.2N with a thickness up to 1.5 μm and a TDD ≤ 5x108 cm−2 was obtained.
  • Thumbnail Image
    Item
    Normally-off GaN transistors for power applications
    (Milton Park : Taylor & Francis, 2014) Hilt, O.; Bahat-Treidel, E.; Brunner, F.; Knauer, A.; Zhytnytska, R.; Kotara, P.; Wuerfl, J.
    Normally-off high voltage GaN-HFETs for switching applications are presented. Normally-off operation with threshold voltages of 1 V and more and with 5 V gate swing has been obtained by using p-type GaN as gate. Different GaN-based buffer types using doping and backside potential barriers have been used to obtain blocking strengths up to 1000 V. The increase of the dynamic on-state resistance is analyzed for the different buffer types. The best trade-off between low dispersion and high blocking strength was obtained for a modified carbon-doped GaN-buffer that showed a 2.6x increase of the dynamic on-state resistance for 500 V switching as compared to switching from 20 V off-state drain bias. Device operation up to 200 °C ambient temperature without any threshold voltage shift is demonstrated.
  • Thumbnail Image
    Item
    Origin of a-plane (Al,Ga)N formation on patterned c-plane AIN/sapphire templates
    (Milton Park : Taylor & Francis, 2013) Mogilatenko, A.; Kirmse, H.; Hagedorn, S.; Richter, E.; Zeimer, U.; Weyers, M.; Tränkle, G.
    a-plane (Al,Ga)N layers can be grown on patterned c-plane AlN/sapphire templates with a ridge direction along [1bar 100]Al2O3. Scanning nanobeam diffraction reveals that the formation of a-plane layers can be explained by nucleation of c-plane (Al,Ga)N with [11bar 20](Al,Ga)N
  • Thumbnail Image
    Item
    Mode transitions in distributed-feedback tapered master-oscillator power-amplifier
    (Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2008) Radziunas, Mindaugas; Tronciu, Vasile Z.; Bandelow, Uwe; Lichtner, Mark; Spreemann, Martin; Wenzel, Hans
    Theoretical and experimental investigations have been carried out to study the spectral and spatial behavior of monolithically integrated distributed-feedback tapered master-oscillators power-amplifiers emitting around 973 nm. Introduction of self and cross heating effects and the analysis of longitudinal optical modes allows us to explain experimental results. The results show a good qualitative agreement between measured and calculated characteristics.
  • Thumbnail Image
    Item
    Improving the stability of distributed-feedback tapered master-oscillator power-amplifiers
    (Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2009) Tronciu, Vasile Z.; Lichtner, Mark; Radziunas, Mindaugas; Bandelow, U.; Wenzel, H.
    We report theoretical results on the wavelength stabilization in distributed-feedback master-oscillator power-amplifiers which are compact semiconductor laser devices capable of emitting a high brilliance beam at an optical power of several Watts. Based on a traveling wave equation model we calculate emitted optical power and spectral maps in dependence on the pump of the power amplifier. We show that a proper choice of the Bragg grating type and coupling coefficient allows to optimize the laser operation, such that for a wide range of injection currents the laser emits a high intensity continuous wave beam.
  • Thumbnail Image
    Item
  • Thumbnail Image
    Item
    GaN Dioden und selbstsperrende GaN Schalttransistoren für effiziente Leistungswandler (GaN Powerswitch) : Verbundprojekt Leistungswandler in GaN-Technologie zur Erschließung ungenutzter Energiepotentiale (PowerGaNPlus) ; im BMBF Verbundvorhaben Leistungselektronik zur Energieeffizienz-Steigerung (LES) ; Laufzeit des Vorhabens: 1.06.2010 bis 31.05.2013
    (Hannover : Technische Informationsbibliothek (TIB), 2014) Hilt, Oliver
    Es wurden GaN-basierte laterale Dioden mit geringer Einsatzspannung und intrinsisch selbstsperrende Transistoren für den Einsatz in Schaltkonvertern realisiert. Transisorergebnisse: - Basierend auf dem p-GaN-Gate Modul wurden selbstsperrende 100 m / 600 V Transistoren mit 1 V Einsatzspannung realisiert. - Durch den Einsatz eines eisendotierten GaN-Puffers konnte die Erhöhung des dynamischen Einschaltwiderstands für das 250 V Schalten auf den Faktor 2.6 reduziert werden. - Die Schaltverluste sind kleiner als für Si-basierte Superjunction MOSFETs. Diodenergebnisse: - Durch die Entwicklung des zurückgesetzten Anodenkontaktes konnten 300 m / 600 V Dioden mit 0.5 V Einsatzspannung realisiert werden. - Die Schaltverluste sind so klein wie bei SiC-basierten HV-Schottkydioden. - Die Dioden wurden erfolgreich im Boost-Konverter (Systemdemonstrator) der Uni Erlangen eingesetzt.