561 results
Search Results
Now showing 1 - 10 of 561
- ItemThe ties that bind - On the impact of losing a consortium member in a cooperatively operated digital preservation system(2016) Lindlar, MichelleCooperatively operated digital preservation systems offer institutions of varying size the chance to actively participate in digital preservation. In current times of budget cuts they are also a valuable asset to larger memory institutions. While the benefits of cooperatively operated systems have been discussed before, the risks associated with a consortial solution have not been analyzed in detail. TIB hosts the Goportis Digital Archive which is used by two large national subject libraries as well as by TIB itself. As the host of this comparatively small preservation network, TIB has started to analyze the particular risk which losing a consortium member poses to the overall system operation. This paper presents the current status of this work-in-progress and highlights two areas: risk factors associated with cost and risk factors associated with the content. While the paper is strictly written from the viewpoint of the consortial leader/ host of this specific network, the underlying processes shall be beneficial to other cooperatively operated digital preservation systems.
- ItemPROBADO 3D - Integration von 3D-Objekten in Digitale Bibliotheken. Ein Dienstleistungsangebot für Architektur und Ingenieurwesen zur Erschließung und Bereitstellung von Multimediadokumenten(2011) Blümel, Ina; Sens, Irina[no abstract available]
- ItemLabel free sensing of creatinine using a 6 GHz CMOS near-field dielectric immunosensor(Cambridge : Royal Society of Chemistry, 2015) Guha, S.; Warsinke, A.; Tientcheu, Ch.M.; Schmalz, K.; Meliani, C.; Wenger, Ch.In this work we present a CMOS high frequency direct immunosensor operating at 6 GHz (C-band) for label free determination of creatinine. The sensor is fabricated in standard 0.13 μm SiGe:C BiCMOS process. The report also demonstrates the ability to immobilize creatinine molecules on a Si3N4 passivation layer of the standard BiCMOS/CMOS process, therefore, evading any further need of cumbersome post processing of the fabricated sensor chip. The sensor is based on capacitive detection of the amount of non-creatinine bound antibodies binding to an immobilized creatinine layer on the passivated sensor. The chip bound antibody amount in turn corresponds indirectly to the creatinine concentration used in the incubation phase. The determination of creatinine in the concentration range of 0.88–880 μM is successfully demonstrated in this work. A sensitivity of 35 MHz/10 fold increase in creatinine concentration (during incubation) at the centre frequency of 6 GHz is gained by the immunosensor. The results are compared with a standard optical measurement technique and the dynamic range and sensitivity is of the order of the established optical indication technique. The C-band immunosensor chip comprising an area of 0.3 mm2 reduces the sensing area considerably, therefore, requiring a sample volume as low as 2 μl. The small analyte sample volume and label free approach also reduce the experimental costs in addition to the low fabrication costs offered by the batch fabrication technique of CMOS/BiCMOS process.
- ItemFulleretic well-defined scaffolds: Donor–fullerene alignment through metal coordination and its effect on photophysics(Hoboken, NJ : Wiley, 2016) Williams, Derek E.; Dolgopolova, Ekaterina A.; Godfrey, Danielle C.; Ermolaeva, Evgeniya D.; Pellechia, Perry J.; Greytak, Andrew B.; Smith, Mark D.; Avdoshenko, Stanislav M.; Popov, Alexey A.; Shustova, Natalia B.Herein, we report the first example of a crystalline metal–donor–fullerene framework, in which control of the donor–fullerene mutual orientation was achieved through chemical bond formation, in particular, by metal coordination. The 13C cross‐polarization magic‐angle spinning NMR spectroscopy, X‐ray diffraction, and time‐resolved fluorescence spectroscopy were performed for comprehensive structural analysis and energy‐transfer (ET) studies of the fulleretic donor–acceptor scaffold. Furthermore, in combination with photoluminescence measurements, the theoretical calculations of the spectral overlap function, Förster radius, excitation energies, and band structure were employed to elucidate the photophysical and ET processes in the prepared fulleretic material. We envision that the well‐defined fulleretic donor–acceptor materials could contribute not only to the basic science of fullerene chemistry but would also be used towards effective development of organic photovoltaics and molecular electronics.
- ItemRoles of hydrogenation, annealing and field in the structure and magnetic entropy change of Tb-based bulk metallic glasses(New York : American Institute of Physics, 2013) Luo, Qiang; Schwarz, Björn; Mattern, Norbert; Shen, Jun; Eckert, JürgenThe reduction of open-volume regions in Tb-based metallic glass (MG) by annealing and hydrogen charging was found to rearrange the atomic structure and tune the magnetic behaviors. After crystallization, the magnetic structure and magnetic entropy change (MEC) alters due to the structural transformation, and a plateau-like-MEC behavior can be obtained. The hydrogen concentration after charging at 1mA/cm2 for 576 h reaches as high as 3290 w-ppm. The magnetization behavior and the MEC change due to the modification of the exchange interaction and the random magnetic anisotropy (RMA) upon hydrogenation. At low temperatures, irreversible positive MEC was obtained, which is related to the internal entropy production. The RMA-to-exchange ratio acts as a switch to control the irreversible entropy production channel and the reversible entropy transfer channel. The field dependence of the MEC is discussed in term of the competition among Zeeman energy, exchange interaction and RMA.
- ItemPronounced ductility in CuZrAl ternary bulk metallic glass composites with optimized microstructure through melt adjustment(New York : American Institute of Physics, 2012) Liu, Zengqian; Li, Ran; Liu, Gang; Song, Kaikai; Pauly, Simon; Zhang, Tao; Eckert, JürgenMicrostructures and mechanical properties of as-cast Cu47.5Zr47.5Al5 bulk metallic glass composites are optimized by appropriate remelting treatment of master alloys. With increasing remelting time, the alloys exhibit homogenized size and distribution of in situ formed B2 CuZr crystals. Pronounced tensile ductility of ∼13.6% and work-hardening ability are obtained for the composite with optimized microstructure. The effect of remelting treatment is attributed to the suppressed heterogeneous nucleation and growth of the crystalline phase from undercooled liquid, which may originate from the dissolution of oxides and nitrides as well as from the micro-scale homogenization of the melt.
- ItemStimuli‐responsive microjets with reconfigurable shape(Hoboken, NJ : Wiley, 2014) Magdanz, Veronika; Stoychev, Georgi; Ionov, Leonid; Sanchez, Samuel; Schmidt, Oliver.G.Flexible thermoresponsive polymeric microjets are formed by the self‐folding of polymeric layers containing a thin Pt film used as catalyst for self‐propulsion in solutions containing hydrogen peroxide. The flexible microjets can reversibly fold and unfold in an accurate manner by applying changes in temperature to the solution in which they are immersed. This effect allows microjets to rapidly start and stop multiple times by controlling the radius of curvature of the microjet. This work opens many possibilities in the field of artificial nanodevices, for fundamental studies on self‐propulsion at the microscale, and also for biorelated applications.
- ItemHigh-performance Li-O2 batteries with trilayered Pd/MnOx/Pd nanomembranes(Hoboken, NJ : Wiley, 2015) Lu, Xueyi; Deng, Junwen; Si, Wenping; Sun, Xiaolei; Liu, Xianghong; Liu, Bo; Liu, Lifeng; Oswald, Steffen; Baunack, Stefan; Grafe, Hans Joachim; Yan, Chenglin; Schmidt, Oliver G.Trilayered Pd/MnOx/Pd nanomembranes are fabricated as the cathode catalysts for Li‐O2 batteries. The combination of Pd and MnOx facilitates the transport of electrons, lithium ions, and oxygen‐containing intermediates, thus effectively decomposing the discharge product Li2O2 and significantly lowering the charge overpotential and enhancing the power efficiency. This is promising for future environmentally friendly applications.
- ItemCorrelation between the microstructures and the deformation mechanisms of CuZr-based bulk metallic glass composites(New York : American Institute of Physics, 2013) Song, K.K.; Pauly, S.; Sun, B.A; Tan, J.; Stoica, M.; Kühn, U.; Eckert, J.The variation of the transformation-mediated deformation behavior with microstructural changes in CuZr-based bulk metallic glass composites is investigated. With increasing crystalline volume fraction, the deformation mechanism gradually changes from a shear-banding dominated process as evidenced by a chaotic serrated flow behavior, to being governed by a martensitic transformation with a pronounced elastic-plastic stage, resulting in different plastic deformations evolving into a self-organized critical state characterized by the power-law distribution of shear avalanches. This is reflected in the stress-strain curves by a single-to-"double"-to-"triple"- double yielding transition and by different mechanical properties with different serrated flow characteristics, which are interpreted based on the microstructural evolutions and a fundamental energy theorem. Our results can assist in understanding deformation behaviors for high-performance metastable alloys.
- ItemControllable sliding transfer of wafer‐size graphene(Hoboken, NJ : Wiley, 2016) Lu, Wenjing; Zeng, Mengqi; Li, Xuesong; Wang, Jiao; Tan, Lifang; Shao, Miaomiao; Han, Jiangli; Wang, Sheng; Yue, Shuanglin; Zhang, Tao; Hu, Xuebo; Mendes, Rafael G.; Rümmeli, Mark H.; Peng, Lianmao; Liu, Zhongfan; Fu, LeiThe innovative design of sliding transfer based on a liquid substrate can succinctly transfer high‐quality, wafer‐size, and contamination‐free graphene within a few seconds. Moreover, it can be extended to transfer other 2D materials. The efficient sliding transfer approach can obtain high‐quality and large‐area graphene for fundamental research and industrial applications.