178 results
Search Results
Now showing 1 - 10 of 178
- ItemAssessment of continuous vaginal logger-based temperature monitoring in fever-induced gilts(Dubai : Science Publications, 2013) Schmidt, Mariana; Ammon, Christian; Schon, Peter; Manteuffel, Christian; Hoffmann, GundulaThe aim of this study was to identify a low risk method to induce fever in gilts and to evaluate vaginal sensors for temperature monitoring. Therefore, a rhinitis atrophicans vaccine was used to induce fever to evaluate sensors and behavioral patterns. During 11 trials, two of four animals were injected with 2 mL of the vaccine Porcilis AR-T DF (Intervet) and the other two animals were treated with 2 mL of 0.9% NaCl as controls. A temperature logger (TRIX-8, LogTag Recorders, Auckland, New Zealand) was used to continuously monitor the vaginal temperature. Additionally, rectal temperatures were measured four times daily. The water consumption, food intake and locomotion behaviors of the animals were analysed one day before treatment and during the day of the treatment. The vaccine induced fever in all gilts, which occurred approximately 5.87 h after vaccination. The vaginal logger temperatures and the rectal temperatures showed a linear correlation in 21 vaccinated gilts (r = 0.86; p<0.0001) and 22 non-vaccinated gilts (r = 0.65; P<0.0001). The vaginal logger can be continuously used to measure the core temperature. Water intake decreased (p<0.0001) in the gilts with fever, whereas food intake did not change (p = 0.9411). The vaccinated gilts spent 79±16 more minutes per day lying after the vaccination (p<0.001) in comparison to the day before the vaccination. Treatment with this vaccine provides the opportunity to induce fever over a short time period (5.13 h) and mild sickness behavior in gilts to investigate disease indicators.
- ItemWater footprint analysis for the assessment of milk production in Brandenburg (Germany)(München : European Geopyhsical Union, 2010) Drastig, K.; Prochnow, A.; Kraatz, S.; Klauss, H.; Plöchl, M.The working group "Adaptation to Climate Change" at the Leibniz-Institute for Agricultural Engineering Potsdam-Bornim (ATB) is introduced. This group calculates the water footprint for agricultural processes and farms, distinguished into green water footprint, blue water footprint, and dilution water footprint. The green and blue water demand of a dairy farm plays a pivotal role in the regional water balance. Considering already existing and forthcoming climate change effects there is a need to determine the water cycle in the field and in housing for process chain optimisation for the adaptation to an expected increasing water scarcity. Resulting investments to boost water productivity and to improve water use efficiency in milk production are two pathways to adapt to climate change effects. In this paper the calculation of blue water demand for dairy farming in Brandenburg (Germany) is presented. The water used for feeding, milk processing, and servicing of cows over the time period of ten years was assessed in our study. The preliminary results of the calculation of the direct blue water footprint shows a decreasing water demand in the dairy production from the year 1999 with 5.98×109 L/yr to a water demand of 5.00×109 L/yr in the year 2008 in Brandenburg because of decreasing animal numbers and an improved average milk yield per cow. Improved feeding practices and shifted breeding to greater-volume producing Holstein-Friesian cow allow the production of milk in a more water sustainable way. The mean blue water consumption for the production of 1 kg milk in the time period between 1999 to 2008 was 3.94±0.29 L. The main part of the consumed water seems to stem from indirect used green water for the production of feed for the cows.
- ItemHydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage(Amsterdam : Elsevier, 2014) Reza, M. Toufiq; Becker, Wolfgang; Sachsenheimer, Kerstin; Mumme, JanNear-infrared (NIR) spectroscopy was evaluated as a rapid method of predicting fiber components (hemicellulose, cellulose, lignin, and ash) and selective compounds of hydrochar and corresponding process liquor produced by hydrothermal carbonization (HTC) of maize silage. Several HTC reaction times and temperatures were applied and NIR spectra of both HTC solids and liquids were obtained and correlated with concentration determined from van-Soest fiber analysis, IC, and UHPLC. Partial least-squares regression was applied to calculate models for the prediction of selective substances. The model developed with the spectra had the best performance in 3–7 factors with a correlation coefficient, which varied between 0.9275–0.9880 and 0.9364–0.9957 for compounds in solid and liquid, respectively. Calculated root mean square errors of prediction (RMSEP) were 0.42–5.06 mg/kg. The preliminary results indicate that NIR, a widely applied technique, might be applied to determine chemical compounds in HTC solid and liquid.
- ItemField inter-comparison of eleven atmospheric ammonia measurement techniques(München : European Geopyhsical Union, 2010) von Bobrutzki, K.; Braban, C.F.; Famulari, D.; Jones, S.K.; Blackall, T.; Smith, T.E.L.; Blom, M.; Coe, H.; Gallagher, M.; Ghalaieny, M.; McGillen, M.R.; Percival, C.J.; Whitehead, J.D.; Ellis, R.; Murphy, J.; Mohacsi, A.; Pogany, A.; Junninen, H.; Rantanen, S.; Sutton, M.A.; Nemitz, E.Eleven instruments for the measurement of ambient concentrations of atmospheric ammonia gas (NH3), based on eight different measurement methods were inter-compared above an intensively managed agricultural field in late summer 2008 in Southern Scotland. To test the instruments over a wide range of concentrations, the field was fertilised with urea midway through the experiment, leading to an increase in the average concentration from 10 to 100 ppbv. The instruments deployed included three wet-chemistry systems, one with offline analysis (annular rotating batch denuder, RBD) and two with online-analysis (Annular Denuder sampling with online Analysis, AMANDA; AiRRmonia), two Quantum Cascade Laser Absorption Spectrometers (a large-cell dual system; DUAL-QCLAS, and a compact system; c-QCLAS), two photo-acoustic spectrometers (WaSul-Flux; Nitrolux-100), a Cavity Ring Down Spectrosmeter (CRDS), a Chemical Ionisation Mass Spectrometer (CIMS), an ion mobility spectrometer (IMS) and an Open-Path Fourier Transform Infra-Red (OP-FTIR) Spectrometer. The instruments were compared with each other and with the average concentration of all instruments. An overall good agreement of hourly average concentrations between the instruments (R2>0.84), was observed for NH3 concentrations at the field of up to 120 ppbv with the slopes against the average ranging from 0.67 (DUAL-QCLAS) to 1.13 (AiRRmonia) with intercepts of −0.74 ppbv (RBD) to +2.69 ppbv (CIMS). More variability was found for performance for lower concentrations (<10 ppbv). Here the main factors affecting measurement precision are (a) the inlet design, (b) the state of inlet filters (where applicable), and (c) the quality of gas-phase standards (where applicable). By reference to the fast (1 Hz) instruments deployed during the study, it was possible to characterize the response times of the slower instruments.
- ItemEstimating Canopy Parameters Based on the Stem Position in Apple Trees Using a 2D LiDAR(Basel : MDPI AG, 2019) Tsoulias, Nikos; Paraforos, Dimitrios S.; Fountas, Spyros; Zude-Sasse, ManuelaData of canopy morphology are crucial for cultivation tasks within orchards. In this study, a 2D light detection and range (LiDAR) laser scanner system was mounted on a tractor, tested on a box with known dimensions (1.81 m × 0.6 m × 0.6 m), and applied in an apple orchard to obtain the 3D structural parameters of the trees (n = 224). The analysis of a metal box which considered the height of four sides resulted in a mean absolute error (MAE) of 8.18 mm with a bias (MBE) of 2.75 mm, representing a root mean square error (RMSE) of 1.63% due to gaps in the point cloud and increased incident angle with enhanced distance between laser aperture and the object. A methodology based on a bivariate point density histogram is proposed to estimate the stem position of each tree. The cylindrical boundary was projected around the estimated stem positions to segment each individual tree. Subsequently, height, stem diameter, and volume of the segmented tree point clouds were estimated and compared with manual measurements. The estimated stem position of each tree was defined using a real time kinematic global navigation satellite system, (RTK-GNSS) resulting in an MAE and MBE of 33.7 mm and 36.5 mm, respectively. The coefficient of determination (R2) considering manual measurements and estimated data from the segmented point clouds appeared high with, respectively, R2 and RMSE of 0.87 and 5.71% for height, 0.88 and 2.23% for stem diameter, as well as 0.77 and 4.64% for canopy volume. Since a certain error for the height and volume measured manually can be assumed, the LiDAR approach provides an alternative to manual readings with the advantage of getting tree individual data of the entire orchard.
- ItemThe MiLA tool: Modeling greenhouse gas emissions and cumulative energy demand of energy crop cultivation in rotation(Amsterdam : Elsevier, 2016) Peter, Christiane; Specka, Xenia; Aurbacher, Joachim; Peter Kornatz, Peter Kornatz; Herrmann, Christiane; Heiermann, Monika; Müller, Janine; Nendel, ClaasCrop rotations are part of current agricultural practice, since they and their effects can contribute to a sustainable agricultural cropping system. However, in current Life Cycle Assessment (LCA) studies, crop rotation effects are insufficiently considered, since these effects are difficult to measure. LCA studies from crop production typically take only one vegetation period into account. As a result, the consideration of how the assessed crop is influenced by the previous crop (crop rotation effects) including: (1) nutrient carryover, (2) reduction in operational requirements and (3) different intensity and timing of farming activities, is outside of the system boundary. However, ignoring these effects may lead to incorrect interpretation of LCA results and consequently to poor agricultural management as well as poor policy decisions. A new LCA tool called the “Model for integrative Life Cycle Assessment in Agriculture (MiLA)” is presented in this work. MiLA has been developed to assess GHG emissions and cumulative energy demands (CED) of cropping systems by taking the characteristics of crop cultivation in rotation into account. This tool enables the user to analyze cropping systems at farm level in order to identify GHG mitigation options and energy-efficient cropping systems. The tool was applied to a case study, including two crop rotations in two different regions in Germany with the goal of demonstrating the effectiveness of this tool on LCA results. Results show that including crop rotation effects can influence the GHG emission result of the individual crop by − 34% up to + 99% and the CED by − 16 up to + 89%. Expanding the system boundary by taking the whole crop rotation into account as well as providing the results based on different functional units improves LCA of energy crop production and helps those making the assessment to draw a more realistic picture of the interactions between crops while increasing the reliability of the LCA results.
- ItemAn alternative to field retting: Fibrous materials based on wet preserved hemp for the manufacture of composites(Basel : MDPI AG, 2019) Gusovius, H.-J.; Lühr, C.; Hoffmann, T.; Pecenka, R.; Idler, C.A process developed at the Leibniz Institute for Agricultural Engineering and Bioeconomy (ATB) for the supply and processing of wet-preserved fiber plants opens up new potential uses for such resources. The processing of industrial hemp into fiber materials and products thereof is undergoing experimental research along the value-added chain from the growing process through to the manufacturing of product samples. The process comprises the direct harvesting of the field-fresh hemp and the subsequent anaerobic storage of the entire plant material. Thus, process risk due to unfavorable weather conditions is prevented in contrast to common dew retting procedures. The effects of the anaerobic storage processes on the properties of the bast part of the plant material are comparable to the results of common retting procedures. Harvest storage, as well as further mechanical processing, leads to different geometrical properties compared to the bast fibers resulting from traditional post harvesting treatment and decortication. The fiber raw material obtained in this way is well suited to the production of fiberboards and the reinforcement of polymer or mineral bonded composites. The objective of this paper is to present recent research results on final products extended by a comprehensive overview of the whole supply chain in order to enable further understanding of the result influencing aspects of prior process steps.
- ItemRisk efficiency of irrigation to cereals in northeast Germany with respect to nitrogen fertilizer(Amsterdam : Elsevier, 2016) Meyer-Aurich, Andreas; Gandorfer, Markus; Trost, Benjamin; Ellmer, Frank; Baumecker, MichaelThe potential role of irrigation of cereals as a response to climate change is under debate. Especially under temperate continental conditions empirical evidence of crop yield response to irrigation in interaction with nitrogen fertilizer supply is rare. Besides mean yield effects, irrigation reduces yield variance, which may be an incentive for farmers to use irrigation. This paper investigates the risk-efficiency of irrigation in cereal production in a temperate continental climate, based on data from a long term field experiment on a sandy soil. Irrigation and no irrigation of winter rye (Secale cereale) and winter barley (Hordeum vulgare) were investigated in three different nitrogen (N) fertilizer levels. Crop yield response data (1995–2010) to irrigation and N fertilizer were used to calculate net returns, certainty equivalents (CE) for different levels of risk aversion and the conditional value at risk (CVaR) as a downside risk indicator in two price scenarios. The scenarios were calculated with a total cost and a partial budget approach. Irrigation was found to be profit-maximizing in all partial budget calculations, which sometimes required higher N input to be profit-maximizing. Irrigation and N fertilizer reduction were identified as risk mitigation strategies, even though their impact was limited. Irrigation reduced the downside risk only in the partial budget calculations. The analysis based on the CE did not show improved risk efficiency with irrigated management options. In contrast, reduced fertilizer input proved to be risk efficient at specific levels of risk aversion. The price expectations of winter rye and winter barley had a much higher impact on the ranking of the management options than risk aversion based on the crop yield variances. At low crop prices for all levels of risk aversion, irrigation of winter barley and winter rye was only economically justified if fixed costs for irrigation were not taken into account. At high crop prices, irrigation of winter barley was also justified based on the total cost calculation. However, this advantage was only given at a very low level of risk aversion. With increasing levels of risk aversion irrigation was not efficient based on the CE in the total cost accounting scenario. In conclusion, irrigation of cereals can contribute to downside risk mitigation and increased profits, if fixed costs for irrigation are covered. However, this conclusion holds only when irrigation is combined with an increased N intensity. If total costs need to be accounted for, irrigation in cereals is not an appropriate risk reduction strategy and a reduction of N input is more effective.
- ItemModeling the water demand on farms(München : European Geopyhsical Union, 2012) Drastig, K.; Prochnow, A.; Kraatz, S.; Libra, J.; Krauß, M.; Döring, K.; Müller, D.; Hunstock, U.The decreasing availability of water caused by depletion and climate change combined with a growing world population requires the productive use of water now and in the future. The young researcher group "AgroHyd" at the Leibniz-Institute for Agricultural Engineering Potsdam-Bornim (ATB) is currently modeling the water demand for agricultural processes at the farm scale and developing indicators to link the hydrological and agricultural perspectives. The aim of the group is to increase productivity in agriculture by raising water productivity in plant production and livestock farming. The effects of various agronomic measures, individual and in combination, on water productivity are assessed using several indicators. Scenarios of agricultural measures, climate and diets are used to test to what extent the water demand for food production will increase due to growing global change in different regions of the world.
- ItemEffect of densification variables on water resistance of corn cob briquettes(Tartu : Eesti Pollumajandusulikool, 2019) Orisaleye, J.I.; Jekayinfa, S.O.; Pecenka, R.; Onifade, T.B.Solid biofuels can be used in heat and power generation applications. The utilization of agricultural residues for this purpose would be of immense benefit to rural communities of developing countries where the resource is being produced. Water resistance is a crucial property for transport and storage of biomass briquettes under moist climate conditions. In this study, the effect of process and material variables on the water resistance property of corn cob briquettes was investigated. The water resistance of briquettes produced ranged between 32.6 and 94.8% for die temperature between 90 °C and 120 °C, hold time from 7.5 to 15 minutes and die pressures between 9 and 15 MPa. A higher die temperature resulted in an increase in the water resistance of the biomass briquettes. Also, increasing the hold time improved the water resistance of the briquettes. Using a particle size less than 2.5 mm resulted in higher briquette water resistance property compared to briquettes produced from particle sizes greater than 2.5 mm. It was also shown that the effect of the interaction of the temperature with particle size on the water resistance of corn cob briquettes was statistically significant (p < 0.05). © 2019, Eesti Pollumajandusulikool. All rights reserved.