Search Results
Shallow shear-wave reflection seismics in the tsunami struck Krueng Aceh River Basin, Sumatra
2008, Polom, U., Arsyad, I., Kümpel, H.-J.
As part of the project "Management of Georisk" (MANGEONAD) of the Federal Institute for Geosciences and Natural Resources (BGR), Hanover, high resolution shallow shear-wave reflection seismics was applied in the Indonesian province Nanggroe Aceh Darussalam, North Sumatra in cooperation with the Government of Indonesia, local counterparts, and the Leibniz Institute for Applied Geosciences, Hanover. The investigations were expected to support classification of earthquake site effects for the reconstruction of buildings and infrastructure as well as for groundwater exploration. The study focus sed on the city of Banda Aceh and the surroundings of Aceh Besar. The shear-wave seismic surveys were done parallel to standard geoengineering investigations like cone penetrometer tests to support subsequent site specific statistical calibration. They were also partly supplemented by shallow p-wave seismics for the identification of (a) elastic subsurface parameters and (b) zones with abundance of groundwater. Evaluation of seismic site effects based on shallow reflection seismics has in fact been found to be a highly useful method in Aceh province. In particular, use of a vibratory seismic source was essential for successful application of shear-wave seismics in the city of Banda Aceh and in areas with compacted ground like on farm tracks in the surroundings, presenting mostly agricultural land use areas. We thus were able to explore the mechanical stiffness of the subsurface down to 100 m depth, occasionally even deeper, with remarkably high resolution. The results were transferred into geotechnical site classification in terms of the International Building Code (IBC, 2003). The seismic images give also insights into the history of the basin sedimentation processes of the Krueng Aceh River delta, which is relevant for the exploration of new areas for construction of safe foundations of buildings and for identification of fresh water aquifers in the tsunami flooded region.
The Cyclostratigraphy Intercomparison Project (CIP): consistency, merits and pitfalls
2019, Sinnesael, Matthias, De Vleeschouwer, David, Zeeden, Christian, Batenburg, Sietske J., Da Silva, Anne-Christine, de Winter, Niels J., Dinarès-Turell, Jaume, Drury, Anna Joy, Gambacorta, Gabriele, Hilgen, Frederik J., Hinnov, Linda A., Hudson, Alexander J.L., Kemp, David B., Lantink, Margriet L., Laurin, Jiří, Li, Mingsong, Liebrand, Diederik, Ma, Chao, Meyers, Stephen R., Monkenbusch, Johannes, Montanari, Alessandro, Nohl, Theresa, Pälike, Heiko, Pas, Damien, Ruhl, Micha, Thibault, Nicolas, Vahlenkamp, Maximilian, Valero, Luis, Wouters, Sébastien, Wu, Huaichun, Claeys, Philippe
Cyclostratigraphy is an important tool for understanding astronomical climate forcing and reading geological time in sedimentary sequences, provided that an imprint of insolation variations caused by Earth’s orbital eccentricity, obliquity and/or precession is preserved (Milankovitch forcing). Numerous stratigraphic and paleoclimate studies have applied cyclostratigraphy, but the robustness of the methodology and its dependence on the investigator have not been systematically evaluated. We developed the Cyclostratigraphy Intercomparison Project (CIP) to assess the robustness of cyclostratigraphic methods using an experimental design of three artificial cyclostratigraphic case studies with known input parameters. Each case study is designed to address specific challenges that are relevant to cyclostratigraphy. Case 1 represents an offshore research vessel environment, as only a drill-core photo and the approximate position of a late Miocene stage boundary are available for analysis. In Case 2, the Pleistocene proxy record displays clear nonlinear cyclical patterns and the interpretation is complicated by the presence of a hiatus. Case 3 represents a Late Devonian proxy record with a low signal-to-noise ratio with no specific theoretical astronomical solution available for this age. Each case was analyzed by a test group of 17-20 participants, with varying experience levels, methodological preferences and dedicated analysis time. During the CIP 2018 meeting in Brussels, Belgium, the ensuing analyses and discussion demonstrated that most participants did not arrive at a perfect solution, which may be partly explained by the limited amount of time spent on the exercises (∼4.5 hours per case). However, in all three cases, the median solution of all submitted analyses accurately approached the correct result and several participants obtained the exact correct answers. Interestingly, systematically better performances were obtained for cases that represented the data type and stratigraphic age that were closest to the individual participants’ experience. This experiment demonstrates that cyclostratigraphy is a powerful tool for deciphering time in sedimentary successions and, importantly, that it is a trainable skill. Finally, we emphasize the importance of an integrated stratigraphic approach and provide flexible guidelines on what good practices in cyclostratigraphy should include. Our case studies provide valuable insight into current common practices in cyclostratigraphy, their potential merits and pitfalls. Our work does not provide a quantitative measure of reliability and uncertainty of cyclostratigraphy, but rather constitutes a starting point for further discussions on how to move the maturing field of cyclostratigraphy forward.
Ice-marginal forced regressive deltas in glacial lake basins: geomorphology, facies variability and large-scale depositional architecture
2018, Winsemann, Jutta, Lang, Jörg, Polom, Ulrich, Loewer, Markus, Igel, Jan, Pollok, Lukas, Brandes, Christian
This study presents a synthesis of the geomorphology, facies variability and depositional architecture of ice-marginal deltas affected by rapid lake-level change. The integration of digital elevation models, outcrop, borehole, ground-penetrating radar and high-resolution shear-wave seismic data allows for a comprehensive analysis of these delta systems and provides information about the distinct types of deltaic facies and geometries generated under different lake-level trends. The exposed delta sediments record mainly the phase of maximum lake level and subsequent lake drainage. The stair-stepped profiles of the delta systems reflect the progressive basinward lobe deposition during forced regression when the lakes successively drained. Depending on the rate and magnitude of lake-level fall, fan-shaped, lobate or more digitate tongue-like delta morphologies developed. Deposits of the stair-stepped transgressive delta bodies are buried, downlapped and onlapped by the younger forced regressive deposits. The delta styles comprise both Gilbert-type deltas and shoal-water deltas. The sedimentary facies of the steep Gilbert-type delta foresets include a wide range of gravity-flow deposits. Delta deposits of the forced-regressive phase are commonly dominated by coarse-grained debrisflow deposits, indicating strong upslope erosion and cannibalization of older delta deposits. Deposits of supercritical turbidity currents are particularly common in sand-rich Gilbert-type deltas that formed during slow rises in lake level and during highstands. Foreset beds consist typically of laterally and vertically stacked deposits of antidunes and cyclic steps. The trigger mechanisms for these supercritical turbidity currents were both hyperpycnal meltwater flows and slope-failure events. Shoal-water deltas formed at low water depths during both low rates of lake-level rise and forced regression. Deposition occurred from tractional flows. Transgressive mouthbars form laterally extensive sand-rich delta bodies with a digitate, multi-tongue morphology. In contrast, forced regressive gravelly shoal-water deltas show a high dispersion of flow directions and form laterally overlapping delta lobes. Deformation structures in the forced-regressive ice-marginal deltas are mainly extensional features, including normal faults, small graben or half-graben structures and shear-deformation bands, which are related to gravitational delta tectonics, postglacial faulting during glacial-isostatic adjustment, and crestal collapse above salt domes. A neotectonic component cannot be ruled out in some cases. © 2018 The Authors. Boreas published by John Wiley & Sons Ltd on behalf of The Boreas Collegium
S-wave experiments for the exploration of a deep geothermal carbonate reservoir in the German Molasse Basin
2021, Wawerzinek, Britta, Buness, Hermann, von Hartmann, Hartwig, Tanner, David C.
There are many successful geothermal projects that exploit the Upper Jurassic aquifer at 2–3 km depth in the German Molasse Basin. However, up to now, only P-wave seismic exploration has been carried out. In an experiment in the Greater Munich area, we recorded S-waves that were generated by the conventional P-wave seismic survey, using 3C receivers. From this, we built a 3D volume of P- to S-converted (PS) waves using the asymptotic conversion point approach. By combining the P-volume and the resulting PS-seismic volume, we were able to derive the spatial distribution of the vp/vs ratio of both the Molasse overburden and the Upper Jurassic reservoir. We found that the vp/vs ratios for the Molasse units range from 2.0 to 2.3 with a median of 2.15, which is much higher than previously assumed. This raises the depth of hypocenters of induced earthquakes in surrounding geothermal wells. The vp/vs ratios found in the Upper Jurassic vary laterally between 1.5 and 2.2. Since no boreholes are available for verification, we test our results against an independently derived facies classification of the conventional 3D seismic volume and found it correlates well. Furthermore, we see that low vp/vs ratios correlate with high vp and vs velocities. We interpret the latter as dolomitized rocks, which are connected with enhanced permeability in the reservoir. We conclude that 3C registration of conventional P-wave surveys is worthwhile.
OSL-dating of the Pleistocene-Holocene climatic transition in loess from China, Europe and North America, and evidence for accretionary pedogenesis
2021, Constantin, D., Mason, J.A., Veres, D., Hambach, U., Panaiotu, C., Zeeden, C., Zhou, L., Marković, S.B., Gerasimenko, N., Avram, A., Tecsa, V., Groza-Sacaciu, S.M., del Valle Villalonga, L., Begy, R., Timar-Gabor, A.
Loess deposits intercalated by paleosols are detailed terrestrial archives of Quaternary climate variability providing information on the global dust cycle and landscape dynamics. Their paleoclimatic significance is often explored by quantifying their mineral magnetic properties due to their sensitivity to local/regional hydroclimate variability. Detailed chronological assessment of such regional proxy records around the climatic transitions allow a better understanding of how regional records react to major global climatic transitions such as the Pleistocene-Holocene climatic transition. Logs of high-resolution magnetic susceptibility and its frequency dependence were used as paleoclimatic proxies to define the environmental transition from the last glacial loess to the current interglacial soil as reflected in nine loess-paleosol sequences across the northern hemisphere, from the Chinese Loess Plateau, the southeastern European loess belt and the central Great Plains, USA. The onset of increase in magnetic susceptibility above typical loess values was used to assess the onset of, and developments during, the Pleistocene-Holocene climatic transition. High-resolution luminescence dating was applied on multiple grain-sizes (4–11 μm, 63–90 μm, 90–125 μm) of quartz extracts from the same sample in order to investigate the timing of Pleistocene-Holocene climatic transition in the investigated sites. The magnetic susceptibility signal shows a smooth and gradual increase for the majority of the sites from the typical low loess values to the interglacial ones. The initiation of this increase, interpreted as recording the initiation of the Pleistocene-Holocene climatic transition at each site, was dated to 14–17.5 ka or even earlier. Our chronological results highlight the need of combining paleoclimatic proxies (magnetic susceptibility) with absolute dating when investigating the Pleistocene-Holocene climatic transition as reflected by the evolution of this proxy in order to avoid chronostratigraphic misinterpretations in loess-paleosol records caused by simple pattern correlation. The detailed luminescence chronologies evidence the continuity of eolian mineral dust accumulation regardless of glacial or interglacial global climatic regimes. Coupled with magnetic susceptibility records this indicates that dust sedimentation and pedogenesis act simultaneously and result in a non-negligible accretional component in the formation of Holocene soils in loess regions across the Northern Hemisphere. The luminescence ages allowed the modeling of accumulation rates for the Holocene soil which are similar for European, Chinese and U.S.A. loess sites investigated and vary from 2 cm ka−1 to 9 cm ka−1. While accretional pedogenesis has often been implicitly or explicitly assumed in paleoclimatic interpretation of loess-paleosol sequences, especially in the Chinese Loess Plateau, our luminescence data add direct evidence for ongoing sedimentation as interglacial soils formed.
Late Pleistocene paleosol formation in a dynamic aggradational microenvironment - A case study from the Malá nad Hronom loess succession (Slovakia)
2021, Bradák, B., Csonka, D., Novothny, Á., Szeberényi, J., Medveďová, A., Rostinsky, P., Fehér, K., Barta, G., Végh, T., Kiss, K., Megyeri, M.
The geomorphological characteristics of the loess succession at Malá nad Hronom (Slovakia) mean that it provides a valuable opportunity for the investigation of differences in soil formation in various topographic positions. Along with the semiquantitative characterization of the paleosols (on the basis of physical properties, texture, the characteristics of peds, clay films, horizon boundaries), high-resolution field magnetic susceptibility measurements and sampling were carried out along four different sections of the profile. Samples for luminescence dating were also taken, in order to establish the chronostratigraphical position of the paleosols studied. The comparison of various proxies revealed the differences in soil formation in a dynamic aggradational microenvironment for the same paleosol horizons located in various positions along the slope. Contrary to expectation, paleosols developed in local top or slope topographical positions did not display significant differences in e.g. in their degree of development, nor the characteristics of their magnetic susceptibility curves. In the case of paleosols in positions lower down the slope, signs of quasi-permanent sediment input could be recognized as being present as early as during the formation of the soil itself. This sediment input would seem to be surpassed in the case of pedogenesis strengthened by the climate of the last interglacial (marine isotope stage - MIS 5). Pedogenesis seems to be sustained by renewed intense dust accumulation in the Late Pleistocene, in MIS 3, though compared to MIS 5, the climate of MIS 3 did not favor intense pedogenesis. Despite the general belief that loess series formed in plateau positions can preserve terrestrial records without significant erosion, in the case of the Malá nad Hronom loess this is not so. Compared to the sequence affected by erosional events in the local top position, the sequence affected by quasi-continuous sediment input in the lower slope position seems to have preserved the soil horizons intact. © 2020 The Author(s)
Predictability of properties of a fractured geothermal reservoir: the opportunities and limitations of an outcrop analogue study
2017, Bauer, Johanna F., Krumbholz, Michael, Meier, Silke, Tanner, David C.
Minimizing exploration risk in deep geothermics is of great economic importance. Especially, knowledge about temperature and permeability of the reservoir is essential. We test the potential of an outcrop analogue study to minimize uncertainties in prediction of the rock properties of a fractured reservoir in the Upper Rhine Graben. Our results show that although mineralogical composition, clay content, grain size, and fabric type are basically comparable, porosity and quartz cementation are not. Young’s modulus, as observed in the outcrop closest to the reservoir is about twice as high (~ 64 GPa) as observed in the reservoir (~ 34 GPa). Most importantly, however, the parameters that describe the fracture system, which are essential to predict reservoir permeability, differ significantly. While the outcrops are dominated by perpendicular fracture sets (striking NE–SW and NW–SE), two different conjugate fracture sets (striking NW–SE and N–S) occur in the reservoir. Fracture apertures, as reported from the FMI, are one order of magnitude wider than in the outcrop. We conclude that our outcrop analogue study fails to predict important properties of the reservoir (such as permeability and porosity). This must be in part because of the tectonically complex setting of the reservoir. We propose that analogue studies are important, but they must be treated with care when attempting to predict the controlling parameters of a fractured reservoir.
Loess landscapes of Europe – Mapping, geomorphology, and zonal differentiation
2021, Lehmkuhl, F., Nett, J.J., Pötter, S., Schulte, P., Sprafke, T., Jary, Z., Antoine, P., Wacha, L., Wolf, D., Zerboni, A., Hošek, J., Marković, S.B., Obreht, I., Sümegi, P., Veres, D., Zeeden, C., Boemke, B., Schaubert, V., Viehweger, J., Hambach, U.
Paleoenvironmental reconstructions on a (supra-)regional scale have gained attention in Quaternary sciences during the last decades. In terrestrial realms, loess deposits and especially intercalations of loess and buried soils, so called loess-paleosol sequences (LPS) are important archives to unravel the terrestrial response to e.g. climatic fluctuations and reconstruct paleoenvironments during the Pleistocene. The analysis of LPS requires the knowledge of several key factors, such as the distribution of the aeolian sediments, their location relative to (potential) source areas, the climate conditions that led to their emplacement and the topography of the sink area. These factors strongly influence the sedimentological and paleoenvironmental characteristics of LPS and show broad variations throughout Europe, leading to a distinct distribution pattern throughout the continent. We present a new map of the distribution of aeolian sediments (mainly loess) and major potential source areas for Europe. The map was compiled combining geodata of different mapping approaches. Most of the used geodata stems from accurate national maps of 27 different countries. Problematic aspects such as different nomenclatures across administrative borders were carefully investigated and revised. The result is a seamless map, which comprises pedological, geological, and geomorphological data and can be used for paleoenvironmental and archeological studies and other applications. We use the resulting map and data from key geomorphological cross-sections to discuss the various influences of geomorphology and paleoenvironment on the deposition and preservation of Late Pleistocene loess throughout Europe. We divided the loess areas into 6 main loess domains and 17 subdomains to understand and explain the factors controlling their distribution and characteristics. For the subdivision we used the following criteria: (1) influence of silt production areas, (2) affiliation to subcatchments, as rivers are very important regional silt transport agents, (3) occurrence of past periglacial activity with characteristic overprinting of the deposits. Additionally, the sediment distribution is combined with elevation data, to investigate the loess distribution statistically as well as visually. Throughout Europe, the variations, and differences of the loess domains are the results of a complex interplay of changing paleoenvironmental conditions and related geomorphologic processes, controlling dust sources, transport, accumulation, preservation, pedogenesis, alongside erosional and reworking events. Climatic, paleoclimatic, and pedoclimatic gradients are on the continental scale an additional important factor, since there are e.g. latitudinal differences of permafrost and periglacial processes, an increase in continentality from west to east and in aridity from northwest to southeast and south, strongly affecting regional sedimentary and geomorphic dynamics. We propose three main depositional regimes for loess formation in Europe: (1.) periglacial and tundra loess formation with periglacial processes and permafrost in the high latitude and mountainous regions; (2.) steppe and desert margin loess formation in the (semi-)arid regions; and (3.) loess and soil formation in temperate and subtropical regions. Loess deposits of (1.) and (2.) show coarser, sandier particle distributions towards the glacial and desert regions. In the humid areas (3.) forest vegetation limited dust production and accumulation, therefore, there is an increase in finer grain sizes due to an increase in weathering.
Provenance and paleoenvironmental context of the Late Pleistocene thin aeolian silt mantles in southwestern Poland – A widespread parent material for soils
2021, Waroszewski, Jaroslaw, Pietranik, Anna, Sprafke, Tobias, Kabała, Cezary, Frechen, Manfred, Jary, Zdzisław, Kot, Aleksandra, Tsukamoto, Sumiko, Meyer-Heintze, Simon, Krawczyk, Marcin, Łabaz, Beata, Schultz, Bernhard, Erban Kochergina, Yulia V.
Thin loess deposits are widespread soil parent materials and important archives for paleoenvironmental reconstruction. The origin of loess in SW Poland is attributed to the Great Odra Valley (GOV), following the general concept that large rivers play a major role in regional silt supply. Yet, the precise provenance (glacier sources and/or local rocks) of silts, possibly deflated from dry GOV braided riverbeds, is not clear. Our study of thin and thick loess mantles in SW Poland for the first time indicates the provenance of thin loess based on mineralogical (MLA-SEM) and isotopic analyses (143Nd/144Nd, 87Sr/86Sr). Luminescence ages of five localities point to thin loess mantle formation during and shortly (23.0 to 17.7 ka yr) after the Last Glacial Maximum (LGM). Our isotopic data indicate that thin loess deposits in SW Poland are the mixtures of two main components – local Sudetic and Scandinavian, the latter delivered by the Fennoscandian ice sheet (FIS). Also, detailed analyses of heavy minerals show that a single mineral (e.g., hornblende) may come from both Sudetic and Scandinavian sources. This research highlights the role of the (Pleistocene) GOV in collecting and homogenizing materials, while supplying the region with fine particles to be deflated by paleowinds from open surfaces. Anomalies in mineralogy and isotopic composition are connected with influence of Sudetic mountain rivers and locally blowing silt material by katabatic winds. Regional grain size differentiation of thin loess mantles explains transport distance and altitude. © 2021 The Authors
Geostatistical mapping of the depth to the bottom of magnetic sources and heat flow estimations in Mexico
2021, Carrillo-de la Cruz, Juan Luis, Prol-Ledesma, Rosa María, Gabriel, Gerald
The depth to the bottom of magnetic sources (DBMS) is widely used as a proxy for crustal thermal structures. In this study, the DBMS is calculated using the spectral analysis of aeromagnetic data for the whole territory of Mexico. By assuming the DBMS to be related to the Curie point depth, the heat flow distribution is estimated. The DBMS and heat flow maps were constructed using geostatistical simulations to quantitatively determine standard deviation as uncertainty. The results show a good agreement with the complex geologic and tectonic setting in Mexico. Small DBMS values (high heat flow) as expected appear in areas where recent volcanism occurs and at seafloor spreading zones. In contrast, large values are present in tectonically stable zones.